The final stage of the repairs of the bathroom is the cloak of plinths. Installing profiles to protect against moisture is necessary. The gap bath formed during the installation is not aesthetic and represents the threat of the hygienicness of the entire premises. Over time, fungus, mold and other microorganisms, emerging in a humid environment appear in an unprotected place.
Climbing Mikricians and Two Supplies are not very pleasant neighbors. Insects appear in this unprotected place, as it accumulates all moisture, the space is not ventilated, constant dampness appears - a rich medium for the appearance of wets and dangerous mushrooms.
You can avoid this situation by installing the plinth between the wall and the bathroom. It will protect the resulting space from water from entering, prevents the emergence of a wet environment under the bathroom and, accordingly, the origin of "new neighbors". Plastic plinth for the bathroom is necessary, it will help to avoid trouble and give the room with a complete and aesthetic appearance.
Plastic plinth
Among the many proposed profiles, the most popular and widely used is plastic. This material has positive characteristics, it is easy to install. However, it is not worth confusing the profile for flooring and protecting the space between the wall and the bathroom. Many are trying to use outdoor airplane pads.
This solution is not entirely correct, since the outdoor corner is not able to protect against constant streams of water. The gap between the bathroom and the wall is distinguished by the fact that it is regularly poured with water, which does not happen with the floor and walls of the entire room. In this regard, to install a base corner on the bath - it is inappropriate. For these purposes there are special profiles for the bathroom. They differ in size and their characteristics.
The plinth is selected depending on the width of the slit. Material for protection against moisture is distinguished by its strength and reliability. In the course of operation, it will not crumble, does not change its form and does not dug. The bathroom is distinguished by high humidity and sharp drops of temperatures. The material is resistant to this medium and does not respond to hot or ice water. The temperature differences are perfectly transferred to the material and are not reflected in its appearance and characteristics.
Article on the topic: Choosing a material for the cottage ceiling
A huge selection of plinths will allow not to worry about the interior and color scheme. Choose the desired shade and a drawing that is harmonizing with a shared finish, will not be difficult. Moreover, plastic profile can be painted with special materials. As for the appearance, it will enrich the bathroom. The view of the bath itself will become more complete and aesthetic. The design looks like a monolith, without cracks and sharp transitions.
By purchasing a protective corner for the bathroom, pay attention to its quality. Check the product for scratches and defects. The high-quality and original profile will last long and will cope with its task perfectly.
Installation process
Installation does not require any special skills. Following the classic installation scheme, the product will not start leaking and deform. The correct installation will be the guarantor of good protection against moisture and mold. Therefore, refer to the installation should be seriously and responsible. The installation of the plinth is reduced to the following steps:
- First of all, you should thoroughly clean the edge of the bath and walls. There should be no bugs, mold, fungi, the remains of old glue and other formations. Wipe the surface with alcohol or other fatty solution. Give the processed areas to dry, you can use a dryer for drying.
- The next step is the measurements of the bath and their marks on the curb. Many apply a plinth and noted a pencil on it. After completing the measurement, proceed to pruning the profile. Trimming, coming on the joints between the walls, is made at an angle of 45 °. For this, it is used stousry. This is a special carpentry for cutting profiles under the desired angle. Thus, another gap is not formed in the junction of the plinth, the presence of which is undesirable.
- As soon as the first two stages are completed, the edge of the bath and walls should be sampled. This will protect the surfaces from glue or other fastening material. The bath itself is covered with a film, in order to avoid random ingress of glue or sealant on the surface.
- Apply foam, sealant or construction glue to the connection area of the corner with a bath and a wall. The layer of foam or other type of fastening should not be too thick. On the layer of glue, the plinth is placed and it is well pressed. If the excess foam spoke when pressed, remove them immediately. The time to set the plinth is 20 minutes. After this period of time, the places of compounds with sealant should be treated both from the side of the bath and from the wall.
Article on the topic: Preparation of concrete floor under linoleum: Instruction
This is a classic plastic plinth installation scheme. There is another way to attach the corners. But it is applied at the construction or repair stage. Laying the plinth occurs during the adhesive tiles per wall. It consists in the fact that the wall of the profile, setting on the wall, hides under the tile itself. This is a more time-consuming and very complex technological process. However, it is more reliable and durable. On the other hand, if you want to remove or change the plinth, you will have to break the tile. This method of laying the profile is quite rare.
With proper installation of the plinth, water will not penetrate the space between the bathroom and the wall. If the product is easily adjacent in some places, it is again sick. It is very important to handle the joints and places of compounds with a sealant, otherwise the moisture will penetrate the microcelness, and the expediency of the whole design will come to no. The quality of the profile does not matter if it is incorrectly installed. It is very important to make installation according to the basic rules of the classic installation scheme.