The construction of the pool in the country house is a complex and responsible event. Among the many technology of construction technologies, the most widespread was obtained by the method of forming a concrete bowl. Water and its pressure will constantly affect the design of the pool, so the concrete mixture must correspond to the characteristics of strength, waterproof, frost resistance. Achieve the first one can, using additional reinforcement. To get a solid construction, it is important to choose the mixture.
Concrete Basin Stages
As a rule, construction is divided into the following items:- Choosing a place and its markup.
- Dumping a pit for foundation.
- Installation of equipment for draining and filtering water.
- Installing formwork.
- Preparation of concrete mix and her fill.
- Summary processing.
The first task is to choose the right place for the future pool. The root system of trees can damage the foundation of the pool, so they should not be nearby. The formwork is laying out of wood and metal design. The form must withstand the pressure, so the bottom of the pool is laid by rubble.
Then the carrier metal structure is formed, the wooden shape is placed on top of it, then coated with polyethylene. For the tasks listed above, the usual concrete is not suitable, so special attention should be paid to the question of its choice. Concrete for the pool must be put in one reception, a small concrete mixer will fit well for this. For final processing, various materials are used. Traditional is a facing of a cafeter, also use mosaic, marble plates or PVC film.
Brand concrete
To fill the base, you can apply inexpensive brands - M100-M200. Their indicators will be enough. Pour the bottom and vertical surfaces need better materials. Here it is necessary to concrete a brand not lower than M400. There are not only high-quality cement in such solutions, but also additives - additives, mastic and so on.
Article on the topic: Height of the washing machine
For finishing work, brands with high waterproofing are required. This includes the same mixes with marking from M400. Steel nets or rods are suitable as fittings.
The solution for filling the pool bowl can be prepared or buy in the finished form. Choosing a second option, order Concrete in Chekhov district Perhaps here - http://betonchehovstroy.ru/. Plant "STROYNRUD" Having occupy the leading position in the market, issues many species of materials for various needs. Its specialists will help to choose the optimal option, taking into account the features of the construction and climate.
Composition of the mixture for the fill of the artificial reservoir
By making the decision to knead the concrete mix for the pool or other artificial reservoir, it is necessary to familiarize themselves more with the optimal composition of the solution. The latter is the stringent requirements:
- Sand. A suitable magnitude of the granules is 1.5-2 mm. No impurities are allowed - clay, garbage and other inclusions.
- Gravel and / or crushed stone. Here you need to give preference for materials from durable rocks. The size of the fractions should be small - from 1 to 2 cm. Impurities are undesirable.
- Cement. Only fresh material is suitable with a maximum storage period of 3 months. Permissible brands - M100-M400, which are selected depending on the stage of work.
- Water. The use of a technical, but pre-purified type is allowed. Water should have a soft structure.
In the process of kneading the solution, it is important to comply with the correct proportions of the ingredients. One weight share of cement should have three - sand and five - rubble. The volume of water depends on the total weight of the mixture. Hydraulic additives are entered at the last stage of kneading. Their number is 4 kg per 1 m3 of concrete.
According to the materials of the site http://betonchehovstroy.ru/