Table of contents: [Hide]
- Preparatory work
- How to perform free carpet laying?
- How to lay carpet on glue?
Laying carpet - not such a simple thing, as it may seem at first glance. Incorrectly laid coverage will last long, inevitably appear to appear and races. Therefore, the newcomer is recommended to familiarize themselves with the technology in this matter, choose the suitable way of laying, to acquire the necessary tools and only after that begin to work.
Carpet laying scheme on a warm floor.
Preparatory work
Before buying carpet repair, the repair work in the room should be completed, removed all the construction trash, otherwise the coating can be swap, which is unacceptable. Laying the carpet is produced almost on any coating: laminate, boardwalk, concrete, linoleum. The main requirement is that the floors are smooth (without significant drops), clean and dry. The room temperature at the time of laying should not be less than + 16ºС, permissible air humidity within 75%.
Before starting work, it is recommended to decompose the carpet on the floor, leave it for a day, during this time the coating will be accumulated and get used to the ambient temperature.
The scheme of pulling the carpet.
Laying the carpet can be performed without a substrate, but with its use, the coating will be softer, do not do without a substrate and in the event that additional noise insulation is required.
Laying the carpet with their own hands is most often done without using glue, the choice of the method depends on the size and features of the room. So, the small room is suitable free styling around the perimeter or two-way tape. If furniture is dragged in the room, then in this case it is necessary to stop on the adhesive method. Carpet, which has a filament or jute base, laid on glue.
Article on the topic: The whole truth about the filamented LED lamps: We disassemble and measure the wattmeter and pulsometer
Back to the category
How to perform free carpet laying?
It will take:
- carpet knife;
- Double-sided tape;
- Roller for rolling carpet;
- Metal ruler.
Laying carpet with fixation around the perimeter is quite easily performed independently. This is the easiest method that is mainly used for small rooms. The carpet is laid out so that the reserve of 5-10 cm accounted for walls. After that, the coating is rolled from the center to the edges using a special roller. Then cut off everything too much: the metal line is placed in the place of the cut, then with the help of a carpet knife, starting from the middle, make a cut, fix the carpet plinth.
Scheme of types of carpet.
Laying with fixation around the perimeter with all its advantages has significant disadvantages. In this case, the detergent vacuum cleaner is better not to use, as this can lead to an irreversible deformation of the carpet cover, for the same reason it is impossible to drag and heavy items. With this laying, the carpet is unlikely to last long, and the probability of bloating is very high.
Laying the carpet with their own hands on bilateral scotch does not represent special difficulties for the beginner in this matter. First, the surface is thoroughly cleaned, then stick the two-sided tape bands so that the grid with cells 50 per 50 cm is 50 cm. In this case, the upper protective film from the tape is not removed. The carpet with a reserve of 5 cm unfolded, work starts from the angle, gradually remove the film from the tape, stick carpet. After that, it is cut off with a carpet knife all unnecessary, with a screwdriver stuffed cutting sections under the plinth.
If there is a frequent temperature difference in the room, the tape can be deformed, as a result of which folds and bloats will appear on the carpet area, they will not unwitting work. This is one of the main disadvantages of this method of laying. But such a coating is fairly easy to lay, and if necessary, dismantle.
Article on the topic: What distance should be between the suspensions on the ceiling
Back to the category
How to lay carpet on glue?
It will take:
- toothed spatula;
- Glue for carpet;
- carpet knife;
- Metal ruler.
Most often, carpet is placed on glue in rooms with a fairly large area, on the wooden or concrete coating. Laminate and linoleum can be reacted with glue, which will lead to irreversible consequences, and work will have to redo. This method of laying is performed with both the substrate and without it. First of all, the surface is prepared, it should be smooth and clean. Before applying glue, the surface must be primed, the primer is chosen according to the type of floor covering (wood, concrete).
Then deploy carpet with a margin of 5 cm, with the help of a carpet knife and a metal line, is cut off all unnecessary, coating into a roll. After that, glue on the floor with a toothed spatula, gradually unfold the roll, thus produce styling. At the end of the work, they sneak the place where the roll was originally laid. There is another way of laying: after the carpet has turned and fired, it is folded in half, stick one side first, then the second. If the substrate is used, then they first glue it, allow to dry, after which they are sled to glue carpet.
If the carpet is stacked in a large room, then in this case it is not necessary to do without junctions. In order for the connection line to be not visible, the carpet is placed on each other with an overlap at least 10 cm (the glue under the place of the joint should not be). It is important that the threads of the surfaces of the surfaces go in one direction, otherwise the connection site will be noticeably. They give the carpet searched within a day, after which the carpet knife make a wavy line, clean the trimming, put the joints. Of course, you can cut carpet and a ruler, but in this case the risk is that the connection will be noticeable.
Article on the topic: how to make a crate on the loggia and the balcony
Lying by glue method gives a number of advantages: the carpet lies perfectly smoothly, no bloating and folds are terrible, cleaning can be made with the help of a detergent vacuum cleaner, it is allowed to move the furniture without fear of damaging the coating. In addition, this laying increases several times the use of carpet. The disadvantages include complex disassembly at the next repair or if you want to change the carpet on something else. What kind of laying method choose is to solve you, each of them has its advantages and disadvantages. It is important to weigh everything for and against, to evaluate your capabilities, then it will be much easier to work, and the result will be proud of the result.