Topiaria from paper are the most practical, as the costs of materials are minimal, but they are no less beautiful. This article will feature ways to manufacture paper trees Corrugation and for queening.
Corrugation in the case
Almost for each Topiaria, the ball is the basis for the crown. Of course, to avoid spending time, you can buy a ready ball, but it will be better to go through all the steps from beginning to end. The base of the tree may not only be a ball, another frequently used figure is the heart. However, beginners will be better starting with a spherical form.
Let's wonder the step-by-step instructions, how to make a ball:
- Installation foam and air ball takes;
- The ball is slightly inflated and puts on a foam tube;
- After a neat foam foam foam, you need to wait for frozen. Drying time depends on the size and on which foam was used. On average, this process can take 7-8 hours;
- Foam hardens faster if the ball inside is mixed with water;
- After the foam dries, you need to remove the top layer from the ball so that the base for the future Topiary was smooth.
Ready.
In addition to the basis, for this craft, paper flowers will be required. There are many ways, the easiest: cut off the strip of corrugated paper with a width of 5 centimeters, then two-thirds are converted and twisted. Flower ready. So that he looked natural, it needs to reproduce a little.
This makes the desired number of flowers. With the help of glue (PVA), they are tight to each other attached to the ball. There should be no spaces. A floristic sponge is placed in the porridge or pot (it can be purchased in a flower shop in construction hypermarkets and online stores).
Article on the topic: Master class in the Petersburg chain of beads: Necklace schemes
A wooden wand is taken to create a trunk, which is covered with acrylic. After dried, the ball is saturated with a wand, and the wand must be stuck in a sponge.
On a note! To keep the design better, you can be made of glue. Pot can be decorated with moss.
To the topiary looks more, use the technique of a carriage.
To do this, it is necessary to cut equal squares from corrugated paper, which then turn around around a sushi chopstick or wooden sipes.
Such small details will need a lot.
These elements are covered by the surface of the ball so that no empty places are formed. They are glued to the usual plow glue. The rest of the craft is exactly the same as in the previous method.
Of course, you can use other materials. To create a ball, a newspaper or paper will be required, and for a more smooth shape, a paper ball is tied with a thread. You can also use a wire, wood branch or tube as a trunk of Topiary. Create a design in a pot with a papier-mache or gypsum.
How to make flowers from corrugated paper for Topiaria:
Variation in Software Quilling
This master class features photos of each step. So, to make a topiary from paper for queening, you will need the following:
- paper or newspaper;
- glue (better pva);
- thermopystole with transparent glue;
- wire;
- Cache or a simple flower pot;
- paper for queening;
- Threads.
So, let's begin.
First you need to create the basis. To do this, you need to form two balls so that one is less than the other. Next you need to lubricate glue and cover green paper. The wire will be a wire, but it must be thick, it will also need to cover with paper. Now you need to wait for the blanks dried.
After drying, the larger of the balls is placed on the bottom of the pot and attached with hot glue.
Article on the topic: Cappers: Video Master Classes for beginners for spring products
Then you need to do the hole in the ball so that the stalk fit there. So that it does not fall, it will be necessary to use glue.
A smaller ball is punctured and satiated on the stem.
Note! At this stage, the drill is unstable and it needs to be pushed so that it saves the desired form.
While dries away, so as not to waste time, you need to make leaves, for this craft you will need about 100 pieces.
With these leaves, the pot and the base of the crafts are placed.
The leaves that remain are glued to the top of the crafts.
Then you need to make flowers. To create a flower core, you need to cut a wide paper strip with a fringe, smeared with glue, twist and after drying. Color petals are created from narrow white paper strips. First, the strip is twisted into the roll, then dissolve and give the shape of the eye, after which they are fixed with glue. The petals glue each other, and the core of the flower is attached to the center. Total such structures will need about 20.
The top of the ball should be covered with flowers, and the bottom - half-sponsored spirals.
According to the same scheme, you can make topiaries with another design. Exemplary options in the photo:
If such a topiary is made once, then it will be easier when creating it variation.
Video on the topic
Video on this topic will help to figure out better: