The bulk floor on the balcony is not very difficult, having a little experience in this business. In open areas, the base of this type can remain uncovered by other materials. In closed balconies, the finished spill floor can serve as the basis for the flooring device from materials such as: linoleum, boardwalk, laminated parquet, painted sheets of DVP and chipboard plates. For open premises, the floor on the balcony is made with their own hands with a small slope of the outside and plums in the angles to remove precipitation.
Required tools and devices
Pumping roller with bulk floors
For the device of bulk floors, you will need to prepare the following toolkit:
- Mop with roller;
- Wide spatula;
- plastic capacity of at least 20 l;
- Electrode with a nozzle for mixing the solution;
- beacons;
- rule;
- Special shoes.
Mop
This device establishes a roller with a puffed coating. Small round protrusions on the roller are squeezed out of a liquid mixture air bubbles and smash the pillion solution, forming a horizontal level surface.Putty knife
A wide shovel has a view of a large rowing. Spatula teeth have rectangular or sharp teeth. The spatula evenly distribute a pouring mixture throughout the floor.
Capacity for mixing dry mixture with water
You can use the container from under different liquids. In the plastic barrel, the upper part is cut, so as to ensure maximum mixer access.Electrode with nozzle
Drill nozzle
It is very convenient to use for the preparation of a cement mixture with a drill with a mixer installed in the cartridge. Such a device at a time can be prepared to 20 liters of cement mixture.
Article on the topic: how to make a balcony in the apartment
Lightness
Devices are pyramidal structures having mobile tags on the basis of their support legs. Tags on legs put the desired bulk thickness.
Embusing evenly on the surface of the floor of his balcony beacon, produce a filling of a liquid mixture. Thickness and horizontality during the fill of the floor are controlled by the labels of beacons. At the end of the work, the beacons are removed, without leaving behind any traces.
Rule
The device controls the horizontal of the frozen surface of the filling floor on the balcony. The rule can be made with their own hands from an aluminum profile with a length of 1.5 to 2 meters.Special shoes
Such shoes can be bought in a construction store. Make it with your own hands is quite simple. Slices of plywood punch with nails. Then Phaneur tie a scotch to the soles of light shoes. Walking on a liquid nylby mixture of the floor does not leave traces. Point punctures are instantly tightened with a solution, without leaving traces. This provides accessibility to any section of the floor during the fill and leveling the surface of the liquid mixture.
Dry mixtures of bulk floors
Dry mixes of bulk floors go to sale in paper bags. The most convenient packaging in bags weighing 25 kilograms. Some of the most famous manufacturers of high-quality mixtures for floors is Cerezite, Tim and Scanmix.Preparatory work
Paul on loggias free from all too much. Then the entire surface is cleaned with a vacuum cleaner. Believe places of floor adjustment to vertical surfaces for deep cracks. If such are detected, they are sealed with cement mortar.
All prepared foundations are processed by primer twice.
Technology fill liquid floors
Filling of liquid floors are performed in several stages:
- In the container, the dry mixture is poured and poured with water. The mixer (an electric door with a nozzle) is prepared for the solution of a solution of homogeneous consistency.
- The spatula is evenly distributed over the surface of the floor, the finished liquid mixture is poured from the barrel.
- Mops with a roller squeeze air bubbles from the solution and level the entire surface of the floor.
- Filling the floor starts from the edge of the surface and finish at the doorway.
- After 5 hours on the floor, you can walk. Using the rule, check the horizontal surface. The height difference is permissible to one millimeter by one and a half meters of floor surface. Deeper flaws are thoroughly rubbed by cement mortar. For details, see this video:
For convenience, water for the preparation of a liquid mixture of floors is poured into two-liter bottles and in five-liter bottles. This adds convenience when dosing water during mixing mixture.
Floor insulation on the balcony
Typically, the base surface of the balcony below the doorway threshold below is 100-150 mm. Such a "trough" is filled with a layer of clay. Ceramzite is covered with a rough cement screed. Then suit the bulk floors. The finished level of the floor must be in the threshold of the doorway. For details on the insulation of the floor on the balcony, see this video:Article on the topic: Choose which doors to put in the living room
Heated flooring
Modern floor heating systems in the trading network are presented in a wide range. The system is a bent electric cord fixed on a dielectric basis. For more information about technology, see this video:
The basis of the floor of the loggia is placed in a layer of thermal insulation. Without this, heat will go out. Then make a rough screed to which the heating system is placed. Heating is closed with bulk floors. On the finished frozen surface laid outdoor coating. Using the control panel, you can set a comfortable room indoor temperature. The closed balcony and loggia with floor heating system become a full-fledged living area.