The kitchen is known is one of the most visited places in the house, so I want it to be not only a multifunctional, but also beautiful. In this regard, the design of the kitchen is becoming more diverse, with the subject of design, the equipment is increasingly becoming the equipment that is intended for household purposes.
Installation of the shell in a tabletop is a fairly simple process, it is enough to have a necessary tool and knowing several aspects of the installation.
Washings in modern kitchen are the key to convenience and purity. When a new car wash is purchased, then it must be attached to the tabletop. They can be of different shapes - round, rectangular, square. In order to do this, it is not necessary to seek help from specialists, everything can be performed with your own hands.
When the kitchen sink is fixed to the tabletop, the overall design of the kitchen and taste preferences should be taken into account.
To make fasteners of the kitchen sink to the table top, you should have certain skills. At the same time you need to use such a set of tools:
- drill;
- diamond disk;
- Different details with which fasteners are carried out;
- putty knife;
- sealant;
- brush.
Installation of washing to the tabletop
High-quality washing fasteners are possible only with the normal thickness of the table top.
The installation begins with what needs to be placed on the table top selected place under the future washing. To do this, you need to use the template, you can easily determine the sink site. After that, in the tabletop, you should cut the hole of the required dimensions, for this it is used logs and drill. To work comfortably, the sink should be placed on the floor, then the installation will be easier.
After the edges are made, they need to be cleaned of dust and sawdust, the available sections are processed by sealant, so the countertop is protected from the negative effects of water. It can be protected, an epoxy resin or silicone can be used. In the event that the countertop is made of plastic, it is necessary to use alcoholic sealant to process the filled holes, this material is applied by brush and spatula. The protective agent should be applied with a smooth layer so that the holes are enveloped, then excess remain, they should be removed.
Article on the topic: Warm floor under carpet: heated carpet and electric heater, do-it-yourself rug infrared
In order to attach the sink to the tabletop, it is recommended to use the details for fasteners. The sink is applied to the tabletop and the place of the future fastener is noted. To do this, use the cutting machine and diamond disk, the location for fasteners should be made under the marked angle. On high-quality fasteners, the countertop can be installed in all the rules and when it will be used, the sink from side will not be sideway.
Before installing all the elements for fasteners, the washing installation is made, after which you need to check whether there are defective places if everything is in order, the installation begins and the desired number of bolts in the slot be fixed.
When the washing fastener is carried out to the tabletop, it is necessary to make sure that the sealant is completely drying, the contours should be put on a special gasket, you can lubricate its edges with silicone.
Installation of washing - Useful recommendations
Mounting scheme in the worktop.After all these actions are completed, the washing gently places in the worktop, if there is an extra silicone, it should be deleted in a timely manner. The mount is optionally to do so that with all the power screwed the bolts, especially it is important if the surface is made of soft material, for example, from a tree, as cracks may form.
After that, the car wash should be established, during this time all hermetic materials that were used in the process of fastening washing to the tabletop are stabilized.
It must be borne in mind that the insertion can only be carried out in the presence of an electrolovka. If there is no such jigsaw to make a cut, you will need a minimum of half a day, if the cutout is carried out by an electric jigsaw, then it will take an order of magnitude less. Successful insert depends on how correct and accurate markings are. When the cutout is carried out, several screws can be screwed into the slot in such a way that the countertop does not get beyond and not beyond the end. In the event that the cutout is carried out from the inside, it is recommended to put a wooden bar on it, it is done so that when the drill is out of the drill, there were no plastic chips.
Article on the topic: Autumn Cart: Several ideas for crafts from natural materials
What should I consider when inserting?
The cut-out is recommended as a thin silicone layer to protect it from moisture from entering the moisture, in addition, phenol and formaldehyde is thus prevented. The insert requires preparation, in particular, it is necessary to glue the sealing tape into the gap between the ears in order to fix the clamps and the edges of the washing.
It happens that the thickness of the table top for the kitchen is too small for tightening the clamps, in this case they need to put pieces of fiberboard, but it is necessary to fasten them with several screws, otherwise the clips will be observed when tightening. Ends of fasteners should be hosted with a hammer in order to securely fix them on the tabletop. Before installing, on the edge can be mounted with silicone to seal the adjacent film. After that, the insert can be considered completed.
Given the features of the structures, work may remain on the installation of the mixer, waste harvester or drain. Fastening the mixer to the kitchen sink can also be done with their own hands - on the sink there is a necessary number of holes that are needed to install the crane. It is important to choose the mixer model correctly, it must be done according to the number of holes on the turning panel. The selection of the mixer should be particularly thorough, while it is necessary to take into account factors such as multifunctionality, maneuverability and practicality. You should not neglect the appearance of the mixer, it must be harmonized with the interior of the room and look spectacularly. However, when choosing a mixer still, much attention should be paid to its functionality than for comfort. Installation of the mixer can be carried out in different ways: on the needle and on the nut. If the installation of the mixer is carried out by beginner builders, it is better to choose the second way, fasten the mixer on the nut is much simpler.
Article on the topic: PVC floor covering: floors and stoves, floor panels with locks, reviews and parquet polyvinyl chloride, photo
If everything is done correctly, then you can not doubt that the appearance of the kitchen will attract the attention of all guests.