Written doors - what is it? Pilenka is a wooden board, usually rectangular shape. This element is inserted into a special frame and fixed by means of a glue or spike-groove system.
White fillety doors
Most often, the door flap is equipped with several panels. These parts are performed from such materials:
- array;
- MDF;
- plywood;
- Chipboard.
In addition, the adaptations under consideration can be represented as glass inserts. In the case when interior doors are equipped with plywoods from plywood, glass or MDF, the mount is carried out using special staps.
Door from the massif
The frame frame is performed from the pine massif or hardwood of the tree. At the same time, the mentioned raw materials can be like solid and glued. The width of the lower part of the door frame has higher rates than the side and upper zones. This is due to the load distribution.
Vertical portions of the frame of interroom fillets are connected through horizontal bars. The number of these elements is determined by the number present in the design, panels.
Types of Pilenok
Pilented doors in the photo are created by the following types of components:
- Figare (photo);
- floors (photo).
Fig-headed inserts
Figarius is the thick part of the panel itself. The edges of the element have a slightly smaller indicator of the specified value. This insert is performed for interior doors from an array or wooden boards glued. At the same time, the thickness of the boards does not exceed 50-millimeters.
Fig-headed panels have fugled edges. They are produced by the grip, cutter either Zenzubel. For the installation of figaneous components in the frame there are longitudinal grooves. However, final fixation requires the use of adhesive composition.
Floors
For the production of floors, a thick board is used. At the same time, these elements are equipped with tongue grooves, through which they are fixed on frames. The diagram of this compound is shown in the photo.
Article on the topic: How can you remake the sofa with your own hands?
As can be seen, the above-mentioned grooves are located on four sides of the insert. During the attachment, P-shaped grooves present on the corresponding components of the frame are inserted into them. The outer zone of the PAZ itself is pressed on the strapping, which determines the name of the device. Such protrusions can be performed in two variations:
- one-sided;
- double-sided.
Such inserts are used in the process of creating not only interroom, but also inlet panel doors from the massif of pine. The latter option assumes the presence of a warming layer. For the construction of such a design, a thicker timber is used. Since the frame has two tongs, the fililers should also be two.
Pile Pine Doors
The duration of the exploitation of the Pile doors from the pine is determined by the quality of the source material, as well as the observance of technological rules during the construction of the structure. As mentioned above, such elements of the interior are performed from the array. Material options (glued array, solid array) are shown in the photo.
The production of interior violent doors requires careful drying of raw materials - pine wood. Otherwise, the product is cracking or other defects will be shown on it. Along with this, certain quality standards must respond to the adhesive composition, through which the slices of the array are recorded. Important components of the production process are also pressure and temperature.
In addition, the panel doors from the pine massif must be treated with a special paintwork. These actions contribute to improving the strength of the structure and improve its appearance. (on the picture).
Benefits of material
Pine has a sufficiently positive characteristics, which are transmitted directly by the panel door made of this natural material. Thus, the design under consideration has the following advantages:
- Aesthetic appearance. Interior doors Pilencated are a very attractive design that is characterized by sophistication and refinement. A similar product is a classic, however, can decorate almost any interior option.
- Environmental Safety. Pile doors made of pine - this is a completely natural product. The product is not able to allocate toxins into the atmosphere, which determines its maximum safety and the possibility of applying indoors relative to which enough strict sanitary requirements are installed.
- Strength. The panel doors from the massif have a high degree of strength, thanks to the production technology, as well as the characteristics of the most raw materials. This circumstance determines the presence of such properties such as reliability and durability.
- Durability. The specified quality inherent in the panel doors is also determined by other parameters. First of all, this is a processing. It must be done correctly in order to warn the drying of the structure, as well as eliminate the harmful effects of the wet environment. For this purpose, the product is covered with special protective compositions and varnishes.
- Good sound insulation. Protection against external noise is a very important property of the product under consideration, which characterizes it from a positive side. This quality allows you to create a favorable atmosphere in the room, both for work and leisure.
Article on the topic: Nutrition curtains in the interior - advantage and photos
It is important to note that such structures can be used in the premises of different types - residential buildings, offices and many others.