Painting ceiling tiles, inexpensive, easy to work and light finishing material, is becoming increasingly popular. This is due to the fact that the staining of the tile allows not only to make it beautiful and unusual, but also to extend the life of such a material. How to choose a paint, prepare and coating, we will tell in this article.
Selection of paint
It is possible to paint the ceiling tile in order to create reliable surface protection from temperature jumps, excessive air humidity in the room, possible mechanical damage. In the case of applying paint materials with excellent waterproof characteristics, the ceiling in the future can be easily cleaned from dirt. The second reason for staining is the desire of the premises' owners to make a ceiling completed and a harmonious part of the interior, which is actually achieved by choosing a flower gamut to your taste and emphasizing the style of the room.
Polyfoam is a wonderful modern material, but has a little disadvantage. After time, the once snow-white color acquires unwanted yellowness, which will help hide the layer of paint.
How to paint the ceiling tile? You can do this by purchasing a water-emulsion or acrylic paint. Each of the species is presented in the building materials market in a large assortment and has a number of advantages. Common advantages of both materials, specialists call a greater degree of density, resistance, moderate gloss, increased resistance to harmful microorganisms, the ability to protect the surface from moisture.
Many choose acrylic paint. It is possible to do this, because it does not have an unpleasant smell, it cannot harm the health and environment, has a rich color palette, even a newcomer can work with her. Acrylic paint is made from polyacrylate, it perfectly transfers sharp change of temperature modes, resistant to ultraviolet radiation. On the surface painted with such material, dust does not settle. The disadvantages include high cost, low vapor! If the material layer turns out to be too thick, the paint can start bubble and sprinkled.
Article on the topic: How to make a desktop lamp do it yourself?
You can stop the choice on the waterfront paint. It is somewhat inferior to acrylic in its properties. Its pluses include steam-resistant, safety for the human body. Such material is easy to work. The water-level paint leaves on the surface a dense layer, a moderate gloss, has an acceptable cost, represented by a wide choice of colors, fireproof, perfectly opposes the ingress and spread of microorganisms. The water exchange should be used only in dry rooms - it is unstable before moisture even after drying. It is impossible to apply such a material too thick layer, because then it can be sprinkled with pieces as acrylic paint.
Preparation
Before painting the ceiling tile from foam, it is necessary to pre-prepare.
You will need the following tools and inventory:
- ladder;
- tray or other paint container;
- rollers and brushes having different sizes;
- Special building glasses to protect the eyes;
- Protective clothing.
To protect the furniture and equipment from pollution, they should be taken out of the room or at least cover the film. You also need to protect the walls and the floor if your plans do not include finishing the surfaces of surfaces. From the ceiling you need to remove web and dust. To protect your health and have a neat look, use protective clothing, put a special headdress, on the hands of the gloves, eye points.
Preparation of the surface before painting implies climbing with the help of putting off the jacks between the tiles, followed by their sinking shallow emery paper. It is required to make the surface of the ceiling become the most even as possible and pleasant smooth to the touch.
Coloring
Protecting itself and interior items, you can start painting the ceiling tile.
Before using the procedure for staining with acrylic composition, all seams are embedded with putty, sink squeezed. Then, the surface is wiped with a dry cloth or brushing the dust with it with a brush. So that the resulting layer was smooth, the tile is first covered with primer, the main component of which is also acrylic. The paint is bred by water, poured into the tray and make control of denothes and colors. To do this, it is recommended to cover the composition of a small portion of foam.
Article on the topic: How to set chimney from sandwich pipes
Painting is carried out using a roller intended for painting work. For places in which it is difficult to paint, there is a brush of a small size. In order to get a saturated beautiful color, the surface is painted again, but you need to wait until the first layer will die normally. The roller must move only in one direction - so really get a uniformly painted ceiling.
If there is a tile with a relief pattern on the ceiling, painting is recommended to carry out by painting paint. It perfectly penetrates all the convexity of the relief, securely filling them. It works such a tool in the spray mode to the surface.
When finishing with water-level paint, the same tools are needed as applying acrylic composition. First of all, painting the places of the walls of the walls and the ceiling is carried out. The brush is immersed in the paint, slightly pressing, then they are made around the perimeter of the ceiling up to 5 cm. Then the roller will not be able to turn the surface of the walls in the further work.
Paint must be applied in 3 layers. For this, a wide roller will fit. Work is advised to start from the left corner of the wall, on which there is a window. According to the treated surface of the ceiling plates, almost devoid of paints with roller. This will remove excess paint. Perpendicular to the first layer is coated with the second layer surface. For the third time, paint is applied, starting with the angle of the wall, which is located opposite the window. Before applying each layer, it is necessary to make sure that the previous normal is treated. Drying time of the layer of such paint is 8 - 12 hours. The third layer is better to apply a new dry roller - then the surface can be safely called homogeneous.
You can not open the windows and the door indoors until you are sure that the surface is dry. It is better to protect the freshly stained surface and from sunlight - it is enough to close the windows with dense curtains. Quality control paint is made, leaving for the ceiling. Such a simple test will show how well the water-emulsion paint is easily.
Article on the topic: What are the pallets for the shower cabin: forms and sizes
Video "Ceiling tiles of foam"
This little video will give an idea of the benefits of foam tiles for the ceiling and answer the question than you can paint.