The insertion in the plumbing is possible if you have a proper permit. Unauthorized trimming of pipes to the central water supply illegally and can create problems with the law.
Especially relevant such a procedure as the insertion into the plumbing, in rural areas. Here, every independently in the house ensures water. As a rule, the main line of the water supply is in the villages and small cities along the central streets.
At a certain distance from each other there are columns for users. Here, the easiest way is to carry out the insert, without a long turning off the water supply.
If you managed to get the right to independently connecting water, it is worth considering several features of this kind of work. First of all, it is important to remember once and for all that all components of the water supply and sewage must be due quality.
This will allow you to avoid frequent repairs and excess spending on the replacement of pipes.
. Get fittings for PND pipe only in specialized stores, where there are quality certificates for the proposed product.
Another important condition is an elementary acquaintance with work on laying and installing water pipes. In order not to block the wood, if you are not sure about your abilities, it is better to turn to professionals.
So, for the insertion in the plumbing there are two ways:
- Rigid cutting with welding.
- Outline claw.
As a rule, the pipes of the central water supply are made of steel. If there is an opportunity to overlap the plumbing at the time of operation, the first sample version is used. If not, a hole is cut through the hard clamp in the pipe.
Let us dwell on the features of the work in the other case.
The first routing method into the plumbing
As a rule, the insertion is carried out or aside, or up. If the water pipe is too deeply laid, only the last option will be available.
Article on the topic: Self-leveling floor: Pros and Cons Applications in the apartment
Welding crashed into the plumbing can be both vertically and horizontally. There are two ways to cut off using welding:
- With overlapping water supply.
- Under pressure, that is, without overlapping.
If water in the central water pipeline may be blocked, it greatly facilitates work. In the pipe pipe, the hole is burned in the required size, the thread is welded.
The fittings used for pipes, the pipes themselves and the rest of the components are better to take metal. Plastic pipes are used already when laying the water supply inside the house.
If there is no possibility to overlap water for work, the inglow process is somewhat more complicated. Here you must first welcome the thread to the central tube. It establishes a full-circular crane.
Already through the crane with the help of drill, a hole in the center tube is done. At the same time, you must protect the perforator from splashes using a cardboard or rubber screen. When the hole is ready, splashes are inevitable.
There are several moments here, which must stop non-professional in front of the choice of such a routing method:
- The use of power tools in combination with water in itself is dangerous.
- The danger can also represent the pressure of water pressure in the center tube.
- Drill the hole in this way is quite difficult.
If you don't have skills in such work, it is better to abandon this method of knocking into a plumbing.
SECOND SUPPLY SUPPLY IN WATER
Let us turn to another way of knocking into a water supply system to install a clamp. The advantage of this method is the availability of working with different materials, not only with metal pipes, but also with PVC and other options.
The method is as follows: the pipeline is on the pipe for size larger than the diameter of the pipe. The clamp must have bolted fasteners.
Next, the place of drilling hole is determined. In this place under the clamp, an expander is published, which will soften the pressure and make the insert easier.
Article on the topic: closer to London: British flag in the interior (Union Jack - 80 photos)
The thread of the desired diameter is welded to the clamp and the hole is drilled. Note that with such a work, water in the central water supply is overlapped. Of course, you can skip this advice only if the water pressure in the pipe is not more than four or five bar.
With too strong pressure in the pipes, you risk injury during drilling process. The perforator can simply knock out from your hands of water pressure.
The choice of the method of the insertion into the plumbing is determined, often the diameter of the pipes and the material from which they are made. Metal pipes, especially not new, better weld with carvings.
For PVC pipes, a method with a clamp is quite suitable. Pipes are quite easy to cut, and the clamp itself is installed quickly. In addition, with this method there is no need for additional special equipment.
Take a look at our construction forum to learn more about the organization of the water supply in a private house. Our specialists will help you understand the intricacies of construction and repair.