From a large coil under cables, you can make an original and interesting table with the copyright print on the table top. How exactly, see and read in the master class.
Materials
To make the table from the cable coil with your own hands, prepare:
- the coil itself;
- rope;
- oil for wooden products;
- rags;
- paint;
- Wooden varnish, transparent;
- pencil;
- brushes;
- roulette;
- line;
- Lobzik;
- drill;
- stationery knife;
- Saw, jigsaw or other tool for cutting wood.
Step 1 . The base of the table from the coil we will do in the form of a cross. To do this, it follows on one of its parties to draw an estimated form. Be sure to check the accuracy of the calculations and make sure that the proportions of the resulting base template obtained.
Step 2. . Cut everything more superfluous on the basis of the future table, following the outlined lines.
Step 3. . Prepare sandpaper or grinding nozzles of different grain. Sand all surfaces of the coil. The base can handle gross paper, but you will need to work more carefully with the worktop. At first, take to her paper processing with graininess 80, then change it to copies with a smaller grain, right up to 240. This is important, since the surface should be perfectly smooth, but the texture of the tree needs to be saved.
Step 4. . Wipe the entire coil with a dry cloth, cleaning it from working dust and garbage. After, its lower part and countertop cover with transparent special oil for wood. Stodit everything and leave everything to the complete surface drying.
Step 5. . In the rack of the coil at the very base of the countertop, drill a hole for the rope. Throw it insight, output through the hole at the top and, told the node, stretch the rope back.
Wrap it around the rack. Tights do dense. A little not reaching the base, the rope is fixed in the same way.
Step 6. . If you also want to put a print at the worktop, use for painting stencils. It can be purchased ready, or do it yourself. In this case, he was made with his own hands. For this, the countertop was sealed with strips of painting tape. After it was drawn pattern-contour. Cut it - the task is not simple. To do this, you need a stationery knife, accuracy to not damage the worktop, and patience.
Article on the topic: Sweater with open shoulders: Knitting a knitting scheme with a photo
Step 7. . Color the tabletop by stencil. Apply paint to the tone and on the foot of the table.
Step 8. . Remove the malarious tape and modify the rack by covering it with the rope to the end.
Step 9. . Cover the tabletop with a transparent varnish, let him dry.
Table ready!