Original hanging shelf for wine and glasses with their own hands
Dremel offers to make a universal hanging wine storage cabinet.
What will take:
- - Wooden rails;
- - 1 wooden bar;
- - multifunctional tool (here Dremel 4000);
- - grinding nozzle (430) 6.4 mm, grain 60;
- - cutting disc for wood (SC544);
- - universal bur (561);
- - Universal cutting kit (565);
- - adhesive gun (here Dremel (930));
- - screwdriver;
- - screws;
- - Dowels;
- - self-tapping screws;
- - metal chain.
Step 1
To make composite shelf parts, saw the wooden bar into several pieces. The rear and front walls of the shelves must match the proportions of 50 × 2 cm, and the side - 25 × 2 cm. To do this, use the Dremel 4000 multifunctional tool with a cutting disk for wood (SC544). Collect the edges of the blanks using Dremel 4000 and the sanding nozzle Dremel (430), 6.4 mm, grain 60.
Step 2.
Take wooden slats and saw them on 12 smooth parts (for each bottle you will need 2 stands). Each billet should not be shorter than 22 cm long. To make such supports, use the Dremel 4000 with a cutting disk for wood (SC544).
Step 3.
Take the front and rear parts of the billets for the wine shelf and mark on them where the rails will be located. Pass the pencils along the entire length of the front part of the shelves - they will need to cut the cuts for bottles. In order to place the bottles in the shelf it was more convenient, cut off the semicircles in which the container should be placed. To cope with this task, use Dremel 4000 and a universal cutting kit (565). Collect the edges of the semicircles using the Dremel 4000 multifunctional tool with a 6.4 mm grinding nozzle, grain 60 (430).
Article on the topic: Electronic viewing of Poklevka do it yourself
Step 4.
Secure the rails at the outlined points using the Dremel adhesive gun (930). To complete the work on the shelf, it remains only to skate all parts of it with screws. Do openings in the components of the shelves and install metal corner brackets in them. Then screw 25-millimeter screws and tighten them with a screwdriver. In order for the wine regiment to become even more convenient, you can install a grid on it for hanging glasses. To do this, it will be necessary only to screw the metal grid with a screwdriver on the reverse side of the shelf.
Step 5.
In the corners of the front side of the wine shelf, screw the self-tapping screws. Attach the metal chain to them - it will be possible to put the shelf with it in any place in the kitchen.
Step 6.
Now only it remains to choose a good place to hang up the cradles. To secure the locker for wine, measure the distance between self-tapping screws. In accordance with it, do four holes in the ceiling using the Dremel 4000 and the universal boraner (561), and then insert the dowel and screw four more additional self-tapping screws. Hang the shelf.
