What should be the height of the input door threshold? Why do you need thresholds? These ancient designs provide sound and thermal insulation, creating good sealing. If the cold flow of air is felt from the inlet opening in the wall, then the threshold was worn out. In this case, it can be installed independently.
The installation of the threshold increases the soundproof and thermal insulation properties of the inlet door, creating a tightness of the design when closing.
The height of the inlet door threshold should be no more than 30 mm. Width depends on the material from which it is made.
What are the thresholds?
The threshold must be harmonized with the front door and fit the material box material. If the door is made of metal, then the threshold should also be made of metal. The same case is with a tree or plastic. In construction, there are instructions on how to install each of them.
The metal door threshold is the most reliable in its operational properties.
When installing a bar on the floor, it is necessary to consider that wood and plastic have a low degree of strength. After a short period of time, the product from such material is rapidly wear out. If the door is wooden, then the threshold is better to install from oak.
The most reliable material is metal. But sometimes, when installing, experts leave large gaps between the threshold and the floor of the house, which requires careful sealing sealants.
Bar on the floor can be installed from concrete or brick. Usually such thresholds are installed at the entrance to a large, public building or on country cottages.
Installation of a concrete door threshold
If it is decided to establish a concrete ledge, then you first need to prepare the surface, set the formwork.
Materials and tools:
- cement;
- primer;
- boards;
- a special mixture for kneading a solution;
- electrical hammer;
- putty knife.
Article on the topic: Wallpapers Photo 2019 Modern: wallpaper design, photo wallpaper in the interior of a small kitchen, photo gallery, video
A concrete mixture is poured into the prepared formwork and carefully smoking.
The first step to implement is the cleansing of the place under the threshold from dust and another garbage. Remains from the old design must be removed. Formed cracks to close the cement mortar. After that, the entire surface should be treated with primer.
Installation of formwork is made from boards. It must be the desired size. It should be noted that the height of the threshold must match the door, otherwise it will not fit tightly.
The solution is prepared from special mixtures designed for construction work of this type. It is necessary to follow the instructions for use. It is impossible to exceed the dose of water when kneading the solution. You need to fill the finished mixture in the formwork immediately, as cooked. Then it is smoothed to the formation of a smooth surface.
Several days it is important to make the installed verge of water, so that it does not crack and was durable.
Installing a wooden threshold for the door
A wooden threshold can be an element of the door frame, in this case it can be renovated or replaced.
Installation of a wooden antifreeze is performed quickly, so it is not difficult to change it or to prevail. If small irregularities have formed on it, it is enough to polish, cover with varnish or paint under the color of the inlet door.
Materials and tools:
- wood boards;
- scrap;
- hacksaw;
- saw;
- a vacuum cleaner;
- nails;
- drill;
- paint;
- varnish.
Before replacing you need to dismantle the old threshold. If the threshold does not protrude above the floor, the elimination of it is performed using the lever. Take the scrap and one of his end will hammer under the threshold, and then click on the other end.
A threshold that rises above the floor before removing freed from the nails and enter the hammer. If it is impossible to knock out entirely, hesitate to cut it into several parts and then delete.
Article on the topic: Why do not be smeared flieslinic wallpaper
Before mounting a wooden threshold, make sure that the entrance door fits tightly to it.
Dry garbage collect a vacuum cleaner. And the surface itself is recommended to rub rag. You can make the threshold yourself or buy ready. If it is larger in size than necessary, then part can be sprinkled. Create a wooden structure can be conventional nails.
In order not for the cracks for the hammer blows, drill the holes of the required diameter. Before you start installing, check how the entrance door closes. If it is well adjacent to the protrusion, it opens freely and closes, then you can start the installation. To complete the work, paint the paint or cover the lacquer.
You can lift the threshold by the coating, which is located in the hallway. If a tile is lying in the corridor, then the threshold can also be lined with tiles. This finish looks beautiful, and the repair will have a type of completion.
Any gaps that are formed during such work must be attached. As soon as the solution freeze, apply silicone putty. It blocks the way to cracks from vibration.
The tree does not apply to durable materials. Therefore, for such a design it is better to choose solid wood. If you independently make the threshold, then use oak, ash, beech, larch. From the selected tree shoe with the help of chisels, form a threshold with a height of no more than 30 mm.
Buying a finished product from a tree, do not save on quality, purchasing a cheap option. It can be made of soft rocks. And this will lead to rapid wear and damage during loads.
So that the wooden thresholds served longer, you need to carefully process them so that moisture penetrates in the gap when the floors washed.
Metal thresholds are usually installed from stainless steel, aluminum or brass. If a metal door is mounted, then it is immediately equipped with the same threshold, which simplifies the task.
Article on the topic: Mavern tape: appointment and advantages
What is a lifting threshold?
The design of such a threshold allows you to raise it when opening the door and omit when closing. It is convenient in those houses where children or elderly people with disabilities live.
When closing the door, a special button is triggered and the threshold automatically goes to the floor.
The cost of such a threshold is low, and it is easy to disassemble when replacing. He is able to serve about 20 years. It is installed in the groove, which cut the door to the door below. Inside the profile of aluminum is a rubber seal. When opening and closing the door, the spring mechanism is triggered, lowering and raising the protrusion.
Installing thresholds is a simple process that is even a non-specialist. It is enough to familiarize yourself with the installation rules and acquire the necessary tools and means. So you can save time and money. The design will be solid and durable.