Sooner or later, old doors lose their former attractiveness and need to be updated. Many simply change them to new, but not always such a step is justified. In some cases, it is enough to repaint or decorate the surface to give the door to the second life.
Update old doors are not at all difficult - enough painting or easy finishes.
Preparatory work, painting, Effect Krakl
You will need:
- Screwdriver (screwdriver);
- putty knife;
- putty;
- cycle (for removing varnish);
- sandpaper;
- primer;
- PVA glue;
- acrylic paint;
- roller and brushes;
- Construction hairdryer or paint removal means.
Tools for painting doors.
Updating the old door with their own hands begin with preparatory work. The first thing the design is removed from the loops, unscrew all the accessories, remove the strokes and remove the glass. Then remove the coating that came into disrepair. The paint is easy to remove with a construction dryer and spatula. It is possible to do with a special solution that is applied to the surface is covered with a film, leave for the time specified on the package. Then the spatula is removed the softened paint layer.
From the wooden door it is necessary to remove the old varnish. For this purpose, it is advisable to purchase in the construction store CCCC. If the farm has a grinding machine, it will significantly simplify the task. It is important to remove the varnish carefully in order not to damage the surface. Remains can be removed using sandpaper.
After the old coating is removed, it is necessary to inspect the door. All chips, pits, scratches must be sharpened. After drying the putty on the surface, emery paper with small grain. At the next stage, the door is ground: it will reduce the consumption of paint and improve the adhesion. For metal entrance doors, the primer is selected according to the material.
Next follows the Painting Stage. For this purpose, it is best to use acrylic or alkyd paint, which will quickly dry and has good resistance. For painting metal doors, you can take acrylic radiator enamel. It is convenient to apply to a wide surface of the paint with a roller, and bottlenecks are crossed with thin tassels.
Article on the topic: Plasterboard eaves - a modern curtain solution
To achieve the Effect of Krakle, you will need varnish for craklera or ordinary PVA glue.
To work, it is necessary to use only high-quality brushes with a dense pile, otherwise the hairs will stick to the surface and spoil the appearance of the door. The paint is applied by a thin layer, give it to dry, then shook the door with thin sandpaper. This technique is repeated 2-3 times.
The original surface with cracks is obtained using special varnishes for cracker, but it's not always possible to purchase them, and they are not suiced. Therefore, you can try to make one-step cracker using conventional PVA glue. First you need to paint the door to the gray-green shade, after drying, apply PVA glue with a thick layer, wait 2-3 minutes.
The glue should be covered with a thin film, then apply a light paint of the dairy shade. You need to move in one direction without returning to the scratched place. Dried paint with a hair dryer. As a result, interesting cracks are formed. Such a color gamut is given for example, you can use any combination of shades to your taste. It is important to remember that one-step cracker does not work on the acrylic of metallic colors. The old door, decorated in a similar way, looks good in the room decorated in olive or Mediterranean style.
Imitation of stained glass
You will need:
- stained paints;
- Art brush with a mild pile;
- stained glass tape on adhesive basis;
- whatman;
- marker.
For imitation of stained glass windows, a special adhesive film will be required.
The decoration of the interior door with glasses can be performed using imitation of stained glass. To do this, you need to purchase stained glass paints and a special adhesive tape. Instead of a ribbon, you can use the contour on the glass, but it is necessary to take into account that it is much more difficult to work with it. First of all, you need to make a drawing on the sheet of Watman. If you do not know how to draw, then take some geometric or abstract pattern. The number of small parts, try to minimize.
Article on the topic: We make a chart on the doorway with your own hands: master class
Put the door glass on Watman with a pattern, on the contour lines, stick the stained glass tape on the adhesive basis. If, instead of the tape, you decided to use the contour, it is important to get acquainted with the rules of its application. Tube spout must be kept at an angle of 45º, while trying to press it evenly, otherwise the line will turn out to be a curve. After the contour is dry, you can adjust the blade line or scalpel.
It remains only to fill the cells with stained in paints. It is best to do with a round watercolor brush. The second layer of paint is applied after complete grazing of the first. Stained glass paints can be mixed with each other, make the lesing, smooth transitions from a dark color to light and vice versa. After drying, the paint glass is inserted into the door, fasten the strokes. This finish will fit almost for any interior. It all depends on the selected pattern, painting and accessories.
Decorating the old door
To perform decoupage doors, you need glue and decoupage card with a suitable pattern.
You will need:
- decoupage card;
- PVA glue;
- putty;
- sandpaper;
- palette knife;
- Acrylic paints and varnish.
The design of the door, made in the Decoupage technique, will make a highlight and variety to the interior. You must purchase a decoupament card with a suitable pattern. The door is painted in the background of the selected motif. Then neatly cut with a drawing with manicure scissors, soaked it in warm water for about 10-15 minutes. After that, the decappace card is removed and removed from it excess water with a paper towel. The opposite side of the figure is missing with PVA glue, glue the motive to the door, with a cloth or rubber roller, remove air bubbles.
The decoupament card on rice paper is not cut, but burst, retreating from the edge of the figure about 5-8 mm; It is not necessary to soak in the water.
The decor is fixed with acrylic varnish so as not to damage it with further work. Next you need to hide the borders of the motive and make the transition smooth. Take an acrylic putty, with the help of a mastikhin, apply it along the contour of the decoupage card, going beyond the drawing line by 1-2 mm. After her drying, pick up the edges of the finishing of small emery paper. Then scented with acrylic paints background, cover the door with varnish.
Article on the topic: Simple electric shock with your own hands
You can add decoupage with various decorative elements from plaster, wood or polyurethane. For edging, the image is well suited wooden planks or ceiling plinth. The decor is glued with liquid nails or special glue (immediately after the primer door). Then, with a putty, all seams are closed, after which painting and decorating are followed.
You can make a decoupage in the technique of decoupage not only the door leaf, but also glass. To do this, you will need acrylic paint Metallic colors (gold, copper, silver). It is best to use aerosol dyes. The glass is laid out on a flat surface and toned its gold or silver paint. Then they take the reproduction of the picture of Husthaw Clima or Alphonse Fly. You can use both the finished poster and the printout on the laser printer (in this case, the reproduction is separated into parts in Photoshop). Next, it is necessary to cover the glass with a thick layer of acrylic varnish, attach an image face down, after which with pressure to carry out a rubber spatula or roller. The main task is to "enlist" the drawing in the varnish.
A day you need to remove paper. For this, the surface is moisturized, then with the help of a sponge for the dishes (rough side), they begin to download paper until the image appears. On the edge of the drawing, you can walk the sandpaper with small grain, then the picture is somewhat with the background. The decor is fixed with aerosol car varnish. The design of the doors with your own hands is an interesting creative process, thanks to which you can turn the thing that has come into disrete into the work of designer art.