Conducting repair work We in most cases choose wallpaper for walls. This universal material has excellent decorative and high-quality characteristics and can be pasted on any surface.
To give the walls additional noise insulating and thermal insulation properties, in some cases the substrate is used under wallpaper. It is about the substrate today and will be discussed, we will look at its main characteristics, species, give advice on its use.
Famous stamp substrate polyf
common data
The substrate under the wallpaper consists of three layers. The internal is made of foamed material, most often it is polyethylene, outside, the paper is most often used, but may be a fliesline or traffic jam, depending on the manufacturer's company and the specific substrate model.
Flizelin is tightly holding heavy wallpaper on the wall, so when weeping wide, vinyl canvas, it is better to use a substrate with the upper layer from this material. The cork is the most natural and eco-friendly material, so the substrate from it is assumed for the corresponding wallpaper. As stated in the manual, glue to the substrate is permissible wallpaper of any class and type.
We only note that if you chose very thin paper or other type wallpapers with a fine structure, choose a white substrate so that it is not so noticeable and it has not contributed to the color of the wallpaper canvase.
The need for a substrate occurs when it is necessary to increase the noise and heat healing characteristics of the room, but besides this, the material has a whole spectrum of advantages.
Substrate under the brand of ecoity
A small list of positive qualities inherent in similar materials:
- High strength characteristics, at the same time excellent elasticity, softness;
- large thermal insulation components;
- high noise reduction, insulating base for quiet microclimate in the room;
- moisture resistance and prevention of condensate formation, as a consequence, the absence of rotting materials on the wall;
- not the ability to absorb odors;
- environmental friendliness and harmlessness;
- Fighting fungus and other microorganisms by means of special processing;
- Long service life, about 20-50 years.
Article on the topic: How to install a split system (air conditioning) yourself
Substrate for pasting under the wallpaper is made by domestic and foreign factories. She does not use great demand, but if desired, it can be found in construction and wallpaper stores. The main differences in the substrate from different manufacturers in the thickness of the material and its composition, therefore the cost of the roll can differ decorated.
Among the well-known brands can be allocated: ecoheat, foam (Penolon), polyfoam, foam (PenoHome), Globex.
The label from the substrate of the ecoity with the advantages of the material
The substrate for wallpaper is sold in small rolls, the width of which is half the meter, and the length of the order of fourteen.
| The substrate under the wallpaper ECOCIT - the use of high-quality thermal insulation and sound insulation materials will allow you to create a comfortable microclimate for living in your room. |
| The insulating layer under the wallpaper polyfom is a detailed overview of the popular insulation, the analysis of the main advantages and weaknesses of the material, the rules of laying the substrate on the walls. |
| Insulation under the wallpaper - the main types of rolled and plaster insulation under the wallpaper, advantages and disadvantages of different species, the features of the installation of the rolled insulation on the wall. |
Proper use
Before using this material, it is advisable to get acquainted with the instructions. We present the main excerpts from it:
- The substrate under the wallpaper cannot be used in rooms with a constant presence of moisture in large quantities, for example, in a bathroom or bath.
- If before pasting the walls, the material, you found fungus on them, it should be removed immediately. To glue the substrate on the fungus is not worth it, even despite the fact that it prevents its development. Remove mold from the wall, and then treat it with special preparations, for example, the composition of the antiplest.
- If errors were made on the wall on the wall, and the slots were formed between the sheets, they can be sealed with ordinary paper, rolling it with a tube. But in most cases there are no such problems, even if the material is a lover on the wall. It is easily cut into pieces and perfectly keeps on the prepared wall.
- The substrate has high sound insulation characteristics, but not sufficient for many specialized premises. This material is more intended for household, rather than professional use. If you need to fully suppress the sound, you will have to use more expensive materials that have a large thickness and fastening to the wall in a special way.
- In the production of the substrate, exclusively environmentally friendly materials are used, so it does not cause any harm to a person. You can use this material in any rooms, bedrooms, children's. We note the fact that when unpacking the material from the roll, no smell does not appear.
- The material has elevated thermal insulation properties, it perfectly holds warmth in the house and does not miss it cold. Therefore, the substrate is great for private houses, cottages and other similar objects.
- When using this material in ordinary apartments, some savings on heating in the winter is allowed, since the substrate perfectly copes with the task of conservation of heat.
Article on the topic: Removing piles
Petoon stamp
When applied to the walls of the substrate under wallpaper, you are unlikely to come across with some serious difficulties, all work is intuitive and easily fulfilled.
Punning the substrate
As in the case of wallpaper, the substrate is easier to glue on the prepared walls. Therefore, before you get the material, remove the old wallpapers, inspect the surface of the walls, while touched in places where the pit appeared, remove the bumps.
The priming of the walls is also necessary, it can be carried out using a special composition, or a simple, inexpensive wallpaper glue, for example, Dvolati. The material is well glued to any surfaces: to concrete, plasterboard, plywood. With pasting walls, you can easily cope with yourself, without attracting professional masters, the main thing is to be patient and accuracy.
Before sticking the substrate, you need to unpack the roll and cut it into the required number of pieces. These pieces fold on a flat surface and give them a day to fly out, align.
Depending on the type of substrate, there are two types of her shoes on the wall. If the external material is made of paper, it must be pre-wrapped and left to be absorbed for several minutes, additionally glue should be applied to the wall. If the top layer of the substrate is made of phlizelin, then we need to smear glue only.
Preparation of material for sticking on the walls
When sticking the substrate, adhesive for heavy wallpaper is used, the composition for flieslinic wallpaper is perfect. The technology of the walls of the walls of the material is similar to work with wallpaper, the canvas glue the joint into the joint, it is desirable not to leave even small gaps.
It is easiest to ride a substrate on the wall with a rubber roller, firstly you can press enough to drive out all the air and do not leave bubbles, and secondly the chance of damaging the material will be extremely low. Before sticking the wallpaper, you need to give the material for a couple of days. Then, with the help of painting tape (fasten), sneaking sheets of sheets and can be attached to the walls of the wallpaper cannon.
Article on the topic: Instruction: How to choose a fine saw
The service life of the substrate varies from 25 to 50 years, depending on the manufacturer, which means that it does not need to be changed every time when changing the wallpaper canvase. The substrate for wallpaper will help to level the walls, protect them from fungus and mold, increase the noise insulation of the room, will increase thermal insulation qualities.
Installation substrate on the wall
Several tips for successful shoes:
- The styling of the substrate involves a certain temperature, higher plus ten degrees, and humidity is less than seventy percent. Therefore, such procedures are not recommended in spring and autumn, when conditions for this are unsuitable. Otherwise, you risk obtaining not the highest quality result.
- Be sure to produce the walls of the wall. Since the substrate is not the easiest material, glue it on the wall is necessary as much as possible.
- As in the case of wallpaper, it is necessary to protect the room from drafts, during sticking and drying the substrate. Provide suitable conditions for work.
The use of the substrate will increase the useful characteristics of the dwelling, allow the walls to align the walls and give them a finished look. Bringing with decent wallpapers, you will be happy to rejoice at the comfort and beauty of your room.