Suppose you recently changed the front door. And everything would be nothing, just the doorway looks terrible. But the aesthetic part is still Polbie. If you do not put slope at the entrance door on time, it will be planted in the openings, and therefore drafts will appear in your home. Yes, and that's not all. Mounting foam used in the process of planting the goods quickly absorbs moisture, so heat will not be held indoors. Make door slopes with your own hands, or purchase a ready-made instance - your choice is extremely yours. But they should be attended by.
Ways to finish and their advantages
Close the slope can be used using the following methods:
- Application on the surface of the walls of the cement mortar. This method was obtained quite widespread both among experienced specialists and among beginners. However, together with budget, there is one solid minus - to prepare a cement mortar, however, and it is very difficult to apply it on the wall, without practicing skills in this matter.
- The use of adhesive mixture. Such a material will be in a penny, but it is much easier to work with it, which will definitely appreciate the newcomer. The glue is applied to the surface in several layers;
- Installation on the frame. Not the most durable material, but reliably hide the wires. In addition, the surface resulting in perfectly smooth.
Making slopes on the doors need in any case. And the point here is not only in the aesthetics of the appearance, but also in your comfort and safety.
Preparation for finishing
Regardless of which method of finishing, you would prefer, not anywhere to go away from standard preparatory measures. So that the door canvas does not suffer, it is necessary to cover with a painting tape or film. Only after proceed to align the surface. All irregularities and roughness should be gently smoothed. For those who decided to apply a special solution for finishing, the cleaning of dust is especially important. It must be removed from everywhere, literally from each centimeter of the surface.
Article on the topic: Types of redevelopment of apartments, ideas, examples
Remember: the reliability of the fastening of materials depends on this. Dust Sketch the usual brush. The main thing is that she had a hard pile. The next preparatory stage is the applying of deep penetration. After desired, you can pave along this surface of the electric pipe.
Plastering
How to properly separate the input door slopes - you will have to face this question if you need to change the door in your own home. There are a lot of ways to close the slopes. If you chose to fly to them, the entire process should be fulfilled:- Prepare the surface. It is recommended to apply primer;
- The next step is to align the corners. Frequent corners are often used;
- Next are the perforated corners. Mount them already on the finish putty. Thus, they will secure reliably, and as a result, you will get perfectly even angles of slopes;
- Very often, experts have to deal with the problem of the walls of the wall. It is really fixed at the stage of finishing of the slopes of your entrance door with your own hands: the narrow strip of drywall is fixed from the door jammer;
- The further finishing of the slopes of the doors is carried out with a putty. It is not difficult to apply it, but time can leave a lot. It all depends on the composition of the putty and the thickness of the layer in which it is applied;
- The final step of the plastering is the use of primer.
Upon completion of the work done, the surface can be freely painted or, if desired, plane wallpaper.
Material gluing
Installing slopes to a new inlet door can be carried out using a special adhesive mixture. This method does not apply to the cheapest, however, the simplicity of the use of the material and the result justify the means you have spent. Wet glue is applied in several layers. Do not forget after each stage you need to give the surface to dry completely.
Mounting on the frame
How to close the slopes on the door? Very often used method for fastening materials directly to the framework. In this case, special preparatory works are not required from you. You only need to apply primer to the surface. The implementation of this method of finishing of slopes requires metal profiles (they are suitable for installation of plasterboard design), wooden bars. Initially, the design itself is fixed, and then the coating. Materials for trim use different.Article on the topic: Maku Scheme Cross Embroidery: free download, what ornament pick up, wanted for love
MDF
Modern specialists very often prefer to install door slips from MDF. These plates are characterized by medium density. In the installation of such a design, conventional screws and carnations can be used. The noteworthy this material is its aesthetics. In addition, its technical qualities talk about the high reliability of the coating.
Laminate
Door slopes from laminate are set by approximately the same as the MDF stove. Among the key advantages of this material is a reliability, a wide color spectrum, as well as good insulating characteristics and ease of cleaning from various contaminants. When installing the laminate on the already trained frame, consider the fact that the doorway will slightly decrease. In addition, one significant disadvantage is thrown into the eyes: the laminate is exposed to moisture.Plasterboard
Plasterboard is often used to close the slopes. Durable and reliable, cheap and suitable for long-term exploitation - this material is widely used and professionals, and newcomers. Install it on the design of metal profiles. Fix self-confesses. Obtaining installation, be sure to put perforated corners. Now you can only handle the surface with putty.
Door slips from plasterboard or plastic - a budget option that has a lot of advantages. Choose whether you are plastic material or prefer something more durable, it depends exclusively from you. The main thing is that the breakdown of slopes combined and neat appearance, and reliability.
Video "Making the slopes of the entrance door"
Slide shows about how you can make a slope in your own hands inside the apartment after installing the entrance doors.