Today, laminate is the most popular flooring for residential rooms and living rooms. Too often because of non-high-quality mounting and poor preparation of rough floors, it is formed on the laminated surface of the bloating and divergence of the joints.
To lower the new floor with such damage, few people want, so many are repairing laminate without disassembly, inviting specialists or performing with their own hands.
The reasons for the flourishing of laminate and elimination of consequences
Practice shows that the situation when laminate swept, it is not uncommon.
Many experts claim to be ideally eliminated this defect is impossible and recommended to replace the flooring or lay a new coating on top of the damaged.
But it is again greater additional costs.
Why does laminate swell?
Water caught in the joints can cause a bloody
There are various reasons why laminate can appear.
How to fix a defect is a separate question, initially, it is necessary to determine the nature of damage. A certain defect can correspond to several options for occurrence.
For example, if the laminate was extended at docking or between the panels, the consigned seams, the reasons may be the following:
- Incorrectly selected substrate for a certain type of material (when the coating is selected, more than 9 mm thick should apply the substrate from the tube or polystyrene with no mee thickness 3 mm, see the table);
- poorly performed installation (wide seam, no dense compound);
- Low quality material;
- There was not enough laminate of a certain thickness (addition to the panels of another type);
- The laminate from water was swept away (a large amount of water was spilled, which was not removed for a long time, respectively, moisture penetrated into the material structure).
The bloody laminate and the formation of "waves" occurs for the following reasons:
- Effect of temperature effects (no deformation gap during installation);
- The docking planks fixed close to the panel (the outdoor flooring can not expand due to the lack of space and the gap).
Article on the topic: Pipe painting, Heating Systems
To answer the question: "Why is laminate diverge, what reasons forced the material to swell?" Can be infinite. But it is not necessary to infinitely blame one of the family members that someone once spilled water, and it should be safely completed on the proposed recommendations.
It should be remembered that the floor laminated flooring will exist for a long time with a high-quality installation, a well-prepared draft and high quality material (the corresponding brand for a certain room).
How to eliminate the consequences of bloating laminate?
To troubleshoot the problem will have to make a coverage
"What if the laminate is swollen, and there are ways to eliminate the problem?", - These popular and frequently asked questions have a positive answer. Repair of laminate is possible to spend with your own hands.
If the laminate was swollen from water, it is necessary to partially disassemble the cover and eliminate the problem. Deleting some panels from a damaged place, you need to dry the substrate or replace it on a disassembled area.
Making the repair of the floor from the laminate of good quality, the discarding element should dry. If the lamel did not take the previous form, it is necessary to change it to the spare (always when installing the laminated cover it is necessary to have a stock) and collect the surface of the floor.
Before you ask the question: "What should I do if the laminate" wave "was swollen around the room?", And try to solve the problem, you need to remove the plinth throughout the perimeter of the room. A few days of the discarded floor should be closed and take the original shape. After that, by repairing a laminate coating, it is necessary to cut off the panel wall for 1-2 cm by creating a deformation gap.
It is worth knowing that the answer to the question is why laminate swept, it can be installation of a door retainer or a connecting plank. These attributes interfere with the natural expansion of the laminated surface and can cause swelling.
Therefore, if you observe the bloody laminate, then it is advisable in a short time to dismantle all the connecting planks and delete door locks.
Article on the topic: how to remove the balcony door
Protection of laminated coating from bloating
In order not to answer the question: "What should I do if a laminate rose?" You just need to prevent it. For this, the entire installation process must be made high quality:
- It is necessary to choose high-quality laminate;
- In a specific room, the corresponding type of specified material should be operated;
- The draft floor must be completed in all requirements so that laminate does not work: it should not be traces of moisture and the foundation must be perfectly smooth;
- Possible docking panels using adhesive mixtures;
- It is necessary to constantly maintain a laminated surface in proper condition (with impregnation) so that you should not ask any more questions: "How to repair laminate with your own hands?". See in this video Read more:
During the exercise of cleaning in the room decorated with the panels, it should not be overly pouring the floor surfaces, since it can lead to cracking and failure of the surface.
Special coatings of laminate
In order to preserve the ones made with your own hands, it is necessary to cover the surface of the panels (without panel pars) with special wax. The restoration of the laminate and rubbing it with special means can be made both by hand with a cloth and with a laminator or grinding machine.
The laminate polishing will end the surface with an additional protective layer, having impregnated with the panel structure, which will not allow to climb and swell into the sex coating. The lamella must be rubbed twice with a period of 3-4 hours, after which the flooring should not be on top of 12 hours.
Wax for laminate
Performing all requirements will not need to ask questions such as: "Why does laminate sweat?", Since this will not happen.
Manual polishing of laminate (despite the fact that you rub your floor, and not someone else's) rather time consuming. Do not despair, if not everyone can buy a polishing device for your pocket. It is possible from existing home tools, the device is laminated to make with your own hands, the repair will then come close to the "finish line". Such a device can be a conventional grinding machine with a polishing round nozzle. Read more about the use of special fasteners for floor covering, see this video:
Article on the topic: Snowman made of threads do it yourself
It should be known that the protective wax must be applied to the perfectly clean and dry surface, you should not be afraid that the impregnation climbed into the panel, in the process of polishing everything will be unlighted.
After the flooring the flooring should not remain wax on the surface, it should occupy the designed places - the seams between the slats. If it so happened that the surface of the laminate swelled, and the flooring panels were able to break between themselves, forming a gap, should not be desirable. It follows in the recommended order to execute the following advice, and this will no longer happen. High-quality laminate flooring will be many years to delight you and your children.