Today, flizelinic wallpapers are tremendous among finishing materials. This is explained by the fact that they are reliable, convenient, have a variety of texture. There are 2 of their form: on a fliesline basis and made from pure fliesline. They are also with a pattern and without intended for further painting.
Flizelin wallpaper is very easy to glue, it is not stretched, do not break, do not compress.
The advantage of these wallpapers is a fairly easy process of pasting, which does not require special skills, they are not stretched, do not rush and not compress.
They hide all the irregularities of the walls well and when the cracks appear in them are not cracking. All this is achieved due to the flieslinic basis, it easily slides on the surface, and can be fulfilled with all the work without helpers. The undoubted advantage is that wallpaper without a picture can be quite often painted (up to 10 times), thereby renewing the interior of the room.
How to glue phlizelin wallpaper
Back to the categoryPreliminary stage - surface preparation
To start, count rolls with wallpaper. To determine their quantity, measure the width and height on each wall. When calculating, add to the length of the sheets of several centimeters to the reserve. You can draw a plan on a piece.
Note that buying rolls is needed with the same part number on each package. If wallpaper with a pattern, make sure it is identical everywhere.
Next, proceed to the preparation of the room:
Wallpaper gently glue only on smooth walls.
- Walls necessarily align. Wide wallpapers badly fall on rough walls, it can affect the quality of the joints;
- Remove all outlets. Wires insulate so that the moisture does not penetrate the boxes. The surface of the walls is well treated with primer and dry.
For sticking, you will need the following set of devices:
- roulette;
- level;
- Roller with a long pile;
- Capacities for the dilution of glue and water;
- a narrow metal spatula and plastic spatula with a soft edge for tuning sheets;
- Brush for smoothing glued cloth;
- knife for cutting;
- Special mesh to remove glue from roller;
- sponge of foam
- pencil;
- film.
Article on the topic: how to dismantle the old toilet
Back to the category
Walking fliesline wallpaper
Before glue meter fliesline wallpaper, mark the markup. These wallpapers have a good edge, so they are glued. It is necessary to place the walls from the corner. They are glued in them. If the width of the wallpaper is 1.06 m, leave the angle of 1 m in both directions.
Follow the vertical line at the level of your growth. From the drawn line, we mark the roulette of 1.06 m. Thus, all the walls should be placed.
Wall markup scheme Before pasting wallpaper.
Put the film on the floor, spread out the roll face down. If sheets with a pattern, consider it when cutting it.
If the sheets without drawings, measure the height in the place where you can glue the sheet, adding 10 cm. Roll to the rolled part so that the edges coincide, then the bending will be smooth. Spend your hand bending, then cut. Similarly, prepare wallpapers for all walls.
Wallpapers are wicked in rolls, while the front side must be inside. Following the instructions specified on the package, in the desired amount of glue. You need to use glue, designed for flieslinic wallpaper. First pour water into the container, and then grab the glue, mix well so that the lumps are not formed, because of them it will not be possible to stick the wallpaper correctly. Leave the glue for a while to swell. Take advantage of a special grid to remove glue excess, it is inserted into the container.
Dry the roller, spend it on the grid, then apply to the surface of the wall calculated for one panel. The peculiarity of flieslinic wallpaper is that they are glued on top.
Tools for shook wallpaper.
Take the wallpaper for the edge and attach to the surface. Gradually, lower the cloth down, brush or roller, score wallpaper starting from the middle to the edges. If you use a plastic spatula, be very neat so as not to spoil the cloth.
Article on the topic: Surface pump for dirty water: centrifugal, self-priming unit, species, price
Watch out the wallpaper well pressed to the surface without forming bubbles and folds.
Having placed 2 or more cauldons, ride the roller each subsequent seam. That part that remained downstairs, carefully cut off. It is advisable to do it when everything gets up. Note that the plinth will have to close the wallpaper entirely. At the top you can install a curb to your taste.
Back to the category
How to glue wide (meter) fliesline wallpaper
Material wallpapers are very popular in view of several of its own features. Compared to the usual, the advantage of meter wallpaper is lightweight, small amounts of seams, reduce costs when purchasing them. For the price of meter wallpaper is cheaper than 2 small.Back to the category
Flying Corners Fliseline Wallpaper
Scheme of order of flieshelin wallpaper.
First, the angle must be prepared. This is done in the process of putty: the corners are equipped with plastic corners, they are attached to a putty to the walls. When everything gets dry, the surface of the walls will be ready for further adhesion.
When the wallpaper is glued to the corner, the wall and plastic corner are well missing with glue.
The whole cloth into the angle is better not to glue, because the wallpaper will be placed. Most often, the angles are imperfect, so the wallpaper is frozen there. To avoid this, try to make a small backset on the nearest wall. It is best - up to 2 cm. The next cloth glue on the next wall, sinking it to an angle with the allen. Then this "tail" cut the knife, focusing on the corner vertical.
That is, under this strip will be punctured to 2 cm stripes from the next wall, and this sheet will rest over the edge into the angle.
Back to the category
How to salary the ceiling
The ceiling is rarely absolutely perfect, especially before finishing. Speakingly align it and disguise some flaws can also be using flieslin wallpaper.
Article on the topic: Washing machine under the tabletop in the bathroom
Flizelin wallpaper for the ceiling have the same advantages as wall mounted.
Prepare the surface in advance, it is necessary that it is smooth and dry. Then trelect the primer ceiling for better adhesion with adhesive composition.
Flizelin wallpaper gluing scheme.
The procedure itself is quite simple, because it is not necessary to customize the sheets of jack. But note that the canvas need to stick a mustache, and to align the joint line, the surplus needs to be cut off the line of the previous sheet. If you act according to technology, the ceiling will be combined with a smooth number of bulk sheets.
Leave the ceiling to dry. But be careful: Fresh air can spoil the whole process, wallpaper can move in place. Therefore, close the windows and doors tightly.
After some time, you can paint the wallpaper (if so are these). The optimal option is calm and inadvertent tones. Perfectly light blue, white or gently peach colors. Remember that the selected color should be combined with the color of the walls.
To paint the wallpaper, you can use the waterfront paint. Apply it with a soft roller. Apply the paint perpendicular to the window in two layers.
So you will avoid uncrowded places. If there is a stucco, it also needs to be punishable. But for this you need to take a brush. Especially carefully blame the connecting seams of the eaves.
The use of fliesline wallpaper will help you place a new room easily and quickly. And if you wish, if after some time you want to change the appearance of the room, you can get the paint to your shade you like and repaint everything again (provided that the wallpaper is selected under painting). So much cheaper and easier to change the interior of the room than to make a new repair.
Fliseline wage care is very simple. In the absence of visible spots, wallpaper sheets can be cleaned with a vacuum cleaner or just walk with a simple damp cloth.