Street summer shower with their own hands
Perhaps everyone is pleasant after a fruitful, hot, summer day, in the country to enjoy the cool shower outdoors. On the construction of an ordinary summer soul you can spend a maximum of one day. Since it will take a minimum amount of free space and expensive materials for its construction. For the simplest option of the summer soul, you may need only a few wooden bars and a piece of film. For a more complex option, you will have to acquire all the necessary building materials.
Also read how to make a pond on a plot and waterfall in the country with your own hands.
Wooden summer souls
Wooden rails or bars are most often used as an option for building a summer shower. The frame of such materials is able to withstand the load of about 200 liters of water in the tank, which is on the roof of the shower.
One of the most important stages of preparing for building is the choice of place. In order for water in the tank to warm up for the day, it is necessary to choose the solar place for the summer shower.
Another important detail during the construction of the soul is drained. To do this, dig a hole, its depth depends on how often the shower will be operated. In order for the walls of the pits, they are additionally strengthened.
So that the soil under the shower is not blurred, it is necessary to install a special pallet. The pallet can be put just on Earth or make a small foundation.
Only coniferous wood suitable for the construction of a wooden summer soul. It is best to take a wooden bar with dimensions of 100x100mm. In order to prevent the processes of rotting wood, the bars can be slightly looming and the part that will be underground, wrap ruby. In order for the resulting design to be more durable, the base of the bars must be slaining or inserted into the ground. Cracked or concreted reference pillars are connected on top of the dressing from the bar. Then the same dressing is done at the bottom. It can simultaneously be the base for the floor. The finished frame is trimmed by the same bars that are pre-treated with oil.
Article on the topic: How to choose curtains and bedspreads from one bedroom fabric: specialist advice
The easiest way to the water tank is the usual barrel into which 100-200 liters of water is placed. The barrel is fixed above the wooden frame and, as the water periodically poured water.
Summer shower of polycarbonate
The design of the summer soul from polycarbonate is very durable. In addition, the shower from this material looks very beautiful. Very spectacular on the plot will look at the summer shower of crane or green. The shower of monolithic polycarbonate will be more durable and beautiful. However, this material is quite expensive. So it is better for these purposes to use a cellular coating, the width of which does not exceed 10 mm.
Frame for summer soul from polycarbonate You can use wooden bars, brick or metal pipes of small diameter.
The water tank can serve as a conventional metal or plastic container. Better if the tank is black or dark.
Metal tanks are quickly heated and keep heat for a long time, but they may be corrosion. The use of stainless steel reservoir will cost quite expensive. It is better to use plastic tanks. They do not rust and much easier than metal. In addition, they are easy to install over the shower. Currently, you can purchase a special plastic side in the form of the Eurocuba. In such a tank, you can easily install a wage to the shower.
When creating a frame, it is better to use a profile metal pipe. As a foundation, a simple squabble of gravel is suitable.
For drain, you can dig a special drain pit. A place for the construction of a summer soul from polycarbonate will suit any, but if you choose a place near a wall or fence, the soul design will be more stable.
Initially, it is necessary to conclude profile pipes to a depth of about a meter. The installation can be installed with the help level. For transverse slats, as a rule, pipes of smaller diameter are used. The finished steel frame is covered with waterproof paint. Then create a platform for water tank. To do this, you can use the steel corner. In order for the tank to be replenished with water, it is connected to a separate pipeline, or use the usual soda hose with the pump. Metal polycarbonate is coated with polycarbonate sheets.
Article on the topic: How to do the electric warm floor with your own hands?
For the construction of the pallet, good outrageous wooden rails will be suitable. Such rails are strong enough and pleasant to the touch.
