There are several ways to remove the creaking of the flooring, without removing the floor, only you first need to determine not only the place of its occurrence, but also a possible reason.
Of all the flooring, this disadvantage is peculiar to fasteners from a natural tree. The feeling of comfort and comfort will be destroyed by the appearance of an unpleasant sound appearing when walking.
Probable reasons
Skyrp - a sign that the backlash appeared in the design
The creaking of the floor will be a sign of a significant reduction in its strength. The tree will last for a long time, however, the sounds of the sounds say about the unforeseen suites in the design.
Wearing the material in this place is accelerated and the longer delay the repair, the greater the likelihood of the complete replacement of the defective element.
Swelling or vice versa, dryness, can cause the appearance of a screens
The reason for the appearance of creaking sounds in the floor is friction surfaces. One or more of the conditions can contribute to the appearance:
- styling with violation of technological gaps;
- Low moisture in the room, leaving the wood drying;
- Wood swelling from excessive humidity;
- Schedule a support lag;
- the use of too thin boards that begged under load;
- Weakening fixing elements (friction about nail, plinth, wedge, spool);
- non-uniform adjacent to neighboring ends, plane warning;
- Defect of a wooden part (cracking, fiber bundle).
Consider how to remove the creaking of the wooden floor, you need to complex, starting with the full list and discarding one explicitly inappropriate reason.
Drying
Floors dry in an excessive dry room
The most common cause forcing the owner to develop the screenshot of the wooden floor is uneven or excessive drying of the material.
Even in the usual room, the air loses moisture without high-quality circulation, if it justs closed for a long time.
The technology of assembling natural materials initially should take into account their reaction to the change in environmental characteristics. Various wood breeds have their own coefficients, proven by practice and taken into account in manufacturing and installation:
Article on the topic: What is waterproof paint - its advantages and features
Changing the moisture content in the wood can be caused not only by periodic oscillations of this indicator of the outer environment, but also natural aging of the fibers without the possibility of recovery.
Slow natural processes using special impregnations, periodically apply mastic, maintaining a favorable microclimate in the house.
Methods of elimination
Remove the damaged Hollow and Pribe New
Wooden designs are used by people a lot of hundreds of years. During this time, ways to fix the creaking of the floor, developed and improved. But always determining to select an effective method will be the correct diagnosis. Probable reasons are eliminated by one of the following actions:
- compact;
- secure (stretch);
- remove a damaged area;
- Welcome from above plywood sheets.
With any version of "treatment" from the screenship, you will have to remove at least 1 board. This is necessary to assess the state of lags and underground space (excessive humidity, mold, fungus).
Seal
The horizontal plane of the floor is checked by a long perfectly level rail. Where the lumens are visible (Lag Sedar), it is necessary to create an emphasis.
Wear flooring leads to an increase in the gap between the coating dies and abrasion of the lock connections.
With a rather minor value of wear, you can resort to such operations:
- Fill in the slit and cracks a mixture of powder graphite with talc;
- Create a compressive force with 1 - 2 wedges in a row (no more). For details on the seal, see this video:
Seal Klin.
Emergency to make it so that there is no screenshot, there will be an application of the mounting foam. It is placed in the cracks under problem places, gaining focus and gluing details. This solution is temporary and, anyway, normal repairs are necessary.
Fastening
Strengthen the boards with additional fasteners
Effective measure of action, how to eliminate the creaking of the wooden floor, is the installation of additional screws of the self-tapping screws, pins and anchors. They are used if the sounds appear in the militant flooring.
Screws can be screwed alongside old nails so that additional chipsets do not appear when they are deleted. To take the screed of boards with lags using self-tapping screws, there is no need to disassemble the coating to determine the location of the beams. To do this, it is enough to remove the plinth and mark the lines with cords. The length of the screw is selected at 2 - 3 cm. In short, the total height of the flooring is rooted. Read more about the tricks from the squeak, see this useful video:
Article on the topic: Bench - gazebo do it yourself
Wooden pins put in the floors in which metal mounts are lacking (for example, in the baths). The boards drill under the tilt so that the pin is part of the equal parts into the ends of the adjacent lamellae. Alternation of the tilt of the holes - in the counter order.
Anchor attachment of boards is applied only to a concrete base.
Replacing the site
If damage to the details of the structure has reached significant size - remove a separate area.
Replacement of floorboard
In this case, it is better to immediately put new items, taking into account previous comments: to use screws, and not nails, recall the gaps, choose the material similar to the environmental setting.
If it is not necessary to do without this decision, it is better to go through and re-tighten the entire floor.
Flooring sheets
Sometimes it helps to select plywood over the old coating
In order to get floors without creak from the problematic design, use such an updating solution, as creating another layer of plywood, the thickness of which starts from 12 mm.
This option does not eliminate the need to stretch old boards in problem places. The sheets themselves are fastened with self-draws to the prepared (level) basis in increments of 0.15 - 0.2 m.
Chickens of chipboard are mounted with a temperature gap of 3 - 5 mm, which is subsequently shipped.
Time-tested budget way to make a new surface without a screen - to lay the sheets of DVP sheets on the substrate from dense fabric (felt, shine cloth). Matter is cut with strips of 0.3 M wide and folded in increments of 0.4 m. The floor will be quiet and fairly warm.