Greenhouse and greenhouse in the country do it yourself
Any gardener knows how the good greenhouse or a greenhouse is needed in the country area. In the greenhouses they grow seedlings before landing it into open ground. Also the greenhouse can be used under conditions of a short cool vegetative period for the full ripening of fruits and vegetables.Polycarbonate greenhouse for cottage
The most modern and demanded materials for the construction of greenhouses is polycarbonate. This material is very durable, durable. Polycarbonate greenhouses are easily going and look beautiful. However, there is one serious minus - a high price. Much cheaper to build a greenhouse from a polycarbonate with a wooden frame independently. Such a greenhouse will serve for a long time if all the wooden elements predetermine the protective composition. The durability of polycarbonate depends on the thickness of its sheets.
As a foundation for the greenhouse, asbetic pipes can be used. They are cut by a long approximately about a meter and bought into pits that can be made ordinary garden brown. In the pipes it is necessary to insert outrageous bars, and the carcass of the greenhouse is built from the prepared boards. The next stage of construction works is the construction of a roof frame and a rafter frame. Then it is necessary to see the bottom of the greenhouse with a galvanized iron ribbon.
Before installing polycarbonate sheets in them, it is necessary to make holes in those places where it will be attached to a wooden frame. Polycarbonate sheets to rafters with self-draws are attached. When installing between polycarbonate sheets, small gaps can be formed, which are sealed with a special ribbon.
Greenhouse from transparent ondulina in the country
In principle, a good greenhouse can work out from almost all available remedies. For one of the versions of the greenhouse in any building store, you only need to purchase a bag of cement, transparent ondulin, screws and a skate element.
Article on the topic: Arbor from Glaska - how to build quickly and inexpensively
For a greenhouse from Ondulina, a regular belt foundation is suitable, which is deepened by about 30 cm. Avoiding the freezing of the Earth in a cold period of time, foam plates will help, which must be put on the bottom of the pits for the foundation. Then the trench is falling asleep with rubble and poured with concrete solution.
When the foundation is completely ready, you can begin construction of a wooden frame, crates and a rafter system. The side walls must be glazed, and the roof of the greenhouse is covered with a muddy. The great advantage of such a structure is that it never happens in it is stuffy, since the ventilation of the room occurs through the gaps that were formed between the waves of the ruddine and the crate.
Greenhouse from old window frames for giving
Excellent greenhouse can turn out of old window frames that remain after repair. Such a greenhouse is perfect for growing plants, as the glass perfectly skips the sun's rays and creates the necessary climate indoors.
First of all, the belt foundation is installed. It can be done using a formwork. While the foundation is frozen, you can prepare window frames for installation. Perhaps some broken or rotten elements of the RAM will have to repair or replace new ones. With windows you need to remove all accessories. With the help of a scraper, you need to remove the remains of the old paint. To prevent the processes of rotting, the development of fungi and other damage, all wooden frame elements are treated with an antiseptic. With the help of sealants and screws, it is necessary to securely secure all the vents that will not perform the function of ventilating the greenhouse.
For greenhouses from window frames, a frame of boards is perfect. For this purpose, you can take the board of approximately the same thickness as the frames themselves. Frames to the frame are fastened with self-draws. All formed during the installation of frames, the gaps must be well closed by mounting foam. Often, special backups are used to impart additional stability. Better if the greenhouse will have a double roof. The main requirement for the roof is tightness. Since even the most insignificant leakage is able to break the necessary greenhouse microclimate.
Article on the topic: Patchwork mosaic: Patchwork with your own hands, pictures on paper, program mug, what kind of well, photo gallery, video instruction
Greenhouse from plastic bottles for giving
Dachits do not consider plastic bottle of garbage. Bottles in the farm are used almost everywhere: to create fakes from bottles that decorate the countryside, flower beds, fences and even greenhouses.
In order for your own hands to make the original greenhouse from plastic bottles you will need:
• Wooden timing;
• mounting rails;
• nails;
• A large number of plastic bottles.
To make a high-sized greenhouse, you will need approximately 500 empty bottles. As not strange as a result of construction, a rather durable and durable design is obtained. The cavity of empty bottles create the effect of the thermos, which allows the greenhouse for a long time to retain heat. You can also do something of glass bottles on your dacha.
The foundation for such a greenhouse is not needed. For the construction of a frame of thick bars, a rectangular base is made. Then the vertical beams, and the roof are installed. Now you can proceed to the construction of walls of plastic bottles.
Before installing the walls, the bottles need to cut off the lower part. This is necessary so that one bottle is easy to wear onto the second. The first row of bottles is installed with the bottom, but with a cut upper part. This is necessary in order for self-stakes to be easily screwed to the ground. Next, bottles are installed by columns, by rolling. The roof of the greenhouse can also be made of bottles in exactly the same way as the walls. For additional tightness, the roof can be covered with a film.
