Today, natural materials are becoming newly popular not only for construction, but also to perform a poscy of the house. One of these materials is a tree that is not only environmentally friendly, but also gives the structure an unusually attractive appearance. The cover of the house can be performed in different techniques, but the cutting board is best laid. This option is usually used when a low structure is trimmed, a country house in the country style. The board may be covered with varnish, paint, soaked with special oils to keep their original appearance.
Roof cornice binder circuit.
The process itself, how to see the house of the edged board with their own hands, is not as folded, but it is necessary to accurately comply with all the conditions and stages, use high-quality boards, special challenges in the form of corners. For operation, the board of two types and angular elements are used. The inner acts as a frame, the angles are mounted for the inner and outer parts of the facade. External board will be facial.
Installing an inner board
Covering house board house.
The boarding board of the board is carried out according to pre-drawn marks, the framework is required for fastening the outer board. During work, it is recommended to use a conventional hammer, a special nail gun is not used. It is this feature that makes the work on the skin of the house with a tree as long as requesing patience.
If screws will be used to attach the inner board, then you can purchase a screwdriver. This will speed up the work, makes it better, but the inner row will still have to be fixed with nails, they must have a length of 80 mm. Before starting to fix the board, it is necessary to pre-process it with an antiseptic, dried. After that, each element is cut to obtain the required length. The front side is put out, the bend must be directed upwards.
Article on the topic: Paul preparation Tile: Instructions, Materials and Tools
Installing outdoor board
After all the inner boards are delivered, it is necessary to start fastening the outdoor. How to do it right?
Mounting is performed in the backstage, with each previous one should fit into the adjacent board with a 250 mm visiting.
Horizontal casing around the window.
Each chalkboard is pre-marked by the backrest so that work goes quickly and efficiently. When drying, the material may be slightly deformed. Therefore, during the purchase it is best to use well-leaning wood.
Tools for work:
- screwdriver;
- Lobzik;
- a hammer;
- Rule and construction level.
During the outer sheaving, the building should be used to apply the construction level so that the surface of the facade finish is smooth and beautiful.
Options for docking boards with outdoor walls.
Fastening options outdoor cutting board Many:
- In Rustic, with protruding under the angle of the lower end parts, the groove is performed below.
- With a spoke in the spool. A complex profile is applied, the outer skin is obtained beautiful and stylish, the thickness of the board is significant.
- In half a hearth. The wall surface is flat with small triangular grooves, the board is cut at an angle, the groove compound does not apply, the nest is obtained by an angular.
- With a dile in a quarter. The facade surface is flat, the profile for the connection is applied complex
- Straight quarter. The surface of the facade is smooth and beautiful, the board is stacked firmly and tightly, the moisture does not get any opportunity to fly under the trim. The fasteners are cut at right angles, the connection is one of the most reliable and simple.
- In the spool. To lay the board, a tongue compound is used, it is important to cut the grooves using a pattern. Otherwise, reliable docking will not work. The facade has a smooth and beautiful surface, the moisture does not cover the wall inside the wall, the drafts will not disturb, like the loss of heat.
- Installation in the fitting. The board sticks, the adhesion is not.
Article on the topic: How to calculate Linoleum on the room: Calculator
Useful advice
When the slaughterhouse is performed by a wooden board, experts advise adhere to certain rules that will provide a beautiful and durable finish:
- To work, it is best to take the board, sharpened on the one hand, and on the other - no. The material is mounted outside. Then the primer, and then the paint will hold much better and longer, and the appearance of the house will be more attractive.
- Boards do not need to be cling only below and at the top, as the material will easily be clever, absorb moisture. It is necessary to use the fastener of the rotor when the boards are fixed on the surface of the facade in increments of 30-45 cm, i.e. in a checkerboard.
- To cover the house, it is possible to apply wood of various breeds. It can be cedar, pine, spruce, mahogany. Based on their experience, it is best to use cedar boards. They are not only durable, but easily processed and have a beautiful appearance. The red tree is difficult to handle, drive into the surface of the nail is difficult, although it does not breed over time. Pine is distinguished by numerous useful properties, but for external use it is not too good, as it is easy to breed, splits. The fir is rarely applied for external work on the facade, although its indicators are much better than that of pine. Spruce boards are replete with bitch, and this does not most effect on quality.
- The cover of the house is best carried out using conventional steel nails, and not galvanized. The problem is that the galvanized layer is easily moving during installation, and under the influence of moisture, nails quickly rust. Stainless steel is much more expensive, but also the quality of the finish above.
The construction of the edged board is an attractive and simple option for any country house. Such facade is not only stylish, but also environmentally friendly. After laying the board can be covered with varnish, staining, soaked with oil. It all depends on the imagination of the home owner, the overall style of the construction.
Article on the topic: How to repair the door closer with your own hands