Wooden floors decorate any room. The only lack of parquet is a rather time-consuming process of care for it. As a rule, the surface of wooden floors is covered with varnish. Over time, the layer of varnish is grieving, and the floors have to restore.
Today there is an oil for the floor, which will facilitate the process of care of the wooden floor. After applying oil, parquet becomes resistant to abrasion. This saves texture of the tree. It seems that under legs are untreated wood.
If you need to change the color, then you can add a special paste to the floors. In this case, the color intensity will depend on the amount of added pigment paste. For treated in this way, the coating is easy to care for. The dirt will not penetrate the structure of the parquet.
Special funds are presented on the market, which are simplified cleaning. Using household chemicals, you can easily cope with stains from spilled coffee, wine or tea.
Advantages of floor oil
To date, the consumer is presented with solid wax oil. They are used as finishing coatings for parquet. It should be noted that they are applied much easier than paint coatings. Floors during operation can be washed. They become resistant to moisture.
If during operation on the surface of wooden floors, defects are formed, it is not necessary to restore the entire floor. It can be restored by a separate surface area. If we talk about the floors covered with paints, then they are not subject to partial restoration.
The surface covered with solid wax oil is necessary to restore 1 time in 10 years. With careful attitude and proper care, a similar restoration can be carried out once every 12 years. Even if we take into account the high price policy with solid wax, it is still an economical means.
Article on the topic: How to build a roof? Roof in a house from a bar
Butter is advisable to use in cases if you need to process the surface of exotic wood. After processing, an unusual structure of the tree will be visible. It is also advisable to use the composition with solid wax for floor processing in a summer house. With sharp temperature differences, the floor is not deformed.
For the same reason, it is advisable to process floors in rooms in rooms with intra-field heating, and rooms in which air humidity is often changing. This is a way to process for floors on open verandas, in arbors or terraces.
It is worth noting another advantage of the flooring covered with butter. The surface after processing remains relief. When walking on such a surface, there is a foot massage, which has a regenerating effect on the human body.
Oil composition
The main component, of course, natural oil. At the same time, the finish coating includes natural oils of several wood breeds. This is tall, linen, soy, sunflower, etc. In addition to natural oils, the coating includes polyurethane, which is responsible for the wear-resistance of the finish coating. Another component of the composition is a wax that has natural origin. Well, be sure to make a solvent. As a rule, the Whitespire is added.After the manufacturer, the resulting means is tested. Since it is intended for use in residential premises, the product must be environmentally friendly.
Action of funds
If we compare this finish coating with varnish, the latter in the structure of the tree penetrates shallow, literally a few millimeters. After frozen on the surface, a thick film is formed, which protects the floor covering from abrasion and mechanical damage. Funds with solid wax act quite differently.
After applying, they penetrate the structure of the parquet, forming a thin film on the surface. But it does not protect the surface from abrasion. The parquet itself becomes durable. There are oils whose wax is not included. However, they are not so effective. And after applying such an oil, it is desirable to further make a layer of wax, which will not penetrate the structure of the tree, but will remain on its surface.
Article on the topic: How to repair the door closer with your own hands
It is also worth noting that the moisture that floors drink during operation, it cannot pass through the lacquer layer. This leads to the deformation of wooden floors. If the floor covering is opened with solid wax oil, then it remains "breathing." This increases the operating period of the floor covering.
When buying oil, pay attention to the amount of solvent, which is included in its composition. If the dry residue is 30-40%, then the means is advisable to use as deep impregnation or care of the wooden surface. Compositions, dry residue, which is 60-70% more viscous. They dry faster, but penetrate the structure of the tree is not so deep.
Using this or that oil, you can get a matte surface, semi-wave, silky or glossy. When choosing a tool, it should be remembered that the glossy surface is more difficult to care than for matte.
If the floors were previously covered with paintwork, they need to be seized. Since in the wood structure, they penetrate a shallow, to do it will be easy. It is enough to remove 2 mm of floor covering. On top of the prepared surface can be applied oil.
Giving a color surface
There are oils for sale in which a colored pigment has already been added. If there is no suitable color, then the products of one company can be mixed with each other. True, it is necessary to do it extremely gently. Alternatively, you can cover the surface of wooden floors with colored oil.
And on top of it, put a coating with solid wax. A less labor-intensive option - the use of pigment pastes. On the shelves of construction stores you can find pasta of a variety of colors.
Coating technology
Previously, you need to pass the surface, close the slots and remove the entire construction trash. After that, you can apply the finish coating. It is convenient to do this with a rubber spatula or roller.
You can work with a wide brush. No need to apply the composition with a thick layer. Then, you need to give the finish coating to absorb. It will only be left to remove excess composition, and polish the floors.
Article on the topic: Forged fences (fences) for private houses - choose your style
If work is carried out in a room with a large quadrature, then without grinding, it is not necessary to do. If necessary, the composition can be applied several times. The coating solidifies for 12 hours. Exploited the surface. Experts recommend not earlier than after 3 days. The application of varnish is a more time-consuming process.
During wet cleaning, it is advisable to use household chemicals, which is intended for parquet coating. She not only perfectly removes dirt and makes water softer, but also updates the coating.