Make a LED lamp with your own linear type hands is quite possible. You yourself can make a linear lamp without purchasing it. At the same time, today such a design for lighting is becoming increasingly popular and even fashionable.
If you wish, you can make a barn with a lamp that will be the main source of lighting in the room. However, this area of application of linear luminaires is not limited.
If you want to know how with your own hands made to supplement the lighting system in the house, it's time to know how such lamps are arranged, and how to collect them yourself.
What is the linear LED lamp
The design itself is extremely simple. However, the linear lamp is not only a LED tape, but also a number of additional components of the design. So, the linear LED lamp consists of:
- aluminum LED profile;
- LED ribbon or ruler;
- LED driver.
Plus, each lamp has a variety of components in the form of suspension, fastening, plugs, depending on the purpose and functionality.
Since linear luminaires can be embedded, suspended or overhead, component set options will be different. You can also choose the power of your lamp in advance and its size.
The advantages of such a lamp include ample opportunities for configuration and length. That is, each assembled lamp will be individual and unique.
The process of assembling the suspension lamp
In order not to confuse itself at the initial stages of the assembly, it is worth starting with the creation of a suspended LED lamp. It is easiest way to design, and efforts when assembling will require a minimum.
To create a luminaire, you will need:
- profile for lamps U-S35;
- LED module Japanese production Hokasu;
- plugs, suspensions and mounting for suspended installation;
- power supply.
For the assembly and installation, you also need a soldering iron, tongs for cutting wires, multimeter, tin.
Article on the topic: Upholstery and hauling upholstered furniture: Basic operations, sequence of work
First of all, you need to measure the ruler and cut them up to the desired length. Do not forget that the ruler should be measured by profile. After that, the ruler is glued to the profile. It remains only to blame the ruler.
It remains only to solder wire for connecting to the network, on this linear lamp can be considered ready. Accessories are fastened depending on where and in what conditions you plan to further use the product.
If you want to install such lamps not only over the workplace, but also around the perimeter of the room, then the obtained finished rules are soldered with each other.
It is important to remember that the LED lamps are especially sensitive to heat. So the best option will be the use of factory profiles with existing LEDs.
There are quite a lot of options as you can make the LED lamp do it yourself. For example, two aluminum corners can be connected by screws. If you position on one side of the LED ribbons in parallel with the fact that they are glued on the other side, you will get a stronger light effect.
Such a simple lamp is easy to highlight objects on the vertical surface.
- It is important to carefully degrease the profile surface before sticking the tape. This can be done using ordinary alcohol.
- Leave the lamp made a few minutes to work, without installing it in the selected place. After that, it is recommended to check the profile for the power of heating.
When you learned the main techniques of work in the manufacture of lamps, you can take for more complex and multifunctional objects. Such a backlight can serve as an additional light source above the working surface of the kitchen cutting table.
In addition, LED lamps made by their own hands are good as elements of lighting for the desktop.
Finally, even simple lamps from the profile can be decorated, an element of the decor, which will organically fit into the overall picture of the interior.
Article on the topic: How to make your own wardrobe bed?
Several light sources in the room have long been not only a fashionable reception, but also by appropriate admission to the organization of lighting. In this regard, LED luminaires become the most functional and economical option.
Even more information about the LED lighting of the house is looking at https://ulight.ru/