Mounting the shells independently in the technological aspect will not be any difficulty. Nevertheless, certain nuances in this process and at each of its stages are still present.
Scheme of standard car wash attachment to the tabletop.
The kitchen sink and washbasin are elements that directly depends not so much convenience and aesthetics as the overall situation of the sanitary and hygienic plan in the apartment. Thus, before taking into account the installation or fulfill its order, it should be properly sought in the construction of such plumbing devices and correctly pick up the most appropriate type of construction. First, it is worth paying attention to technical features.
Design of siphon
The simplest description of the type of siphon is the S-shaped bending of the removal corrugated hose, rotated 90 degrees vertically. It is mainly sufficient for a washbasin, because the spent toilet paper does not penetrate into the sink, arrangements from dishes and hygienic gaskets.
However, there is a nuance: in the process of cleaning sewage, the corrugation can be damaged using corrugation vehicles. If you need to clean the sewage with pneumandum (operating from an inert-type sphawned gas, it can also break in instantly. Cleaning the corrugations with the help of a cable is unacceptable. Accordingly, if the sewage is not the subject of the first importance in the apartment, but it has to be "punched" quite often, for these purposes it is necessary to use a hard siphon with the presence of a revision (removable cover for cleaning and inspection). In the kitchen, this device will not need.
Installation of washing in the worktop.
Hard-type siphons can be classified as follows: Siphon-bottle and knee with removable hatch (outdated sample). In the first case, the design is two concentric pipes, smaller and greater diameter. The smaller is inserted into a large-scale interval at the bottom. Lower, in turn, the pipe of the siphon-bottles is inserted into a special hatch on the thread; The removal is mounted in the side part.
Article on the topic: Rubber tile laying technology
Cleaning the bottle is a fairly simple process. At the same time, gloves are put on, substitute the bucket, unscrew the lower hatch, and all waste are falling into the container. It is important to clearly trace the purchase process so that the outer tube is equipped with a kind of narrowing up. Otherwise, pollution can be blocked and have to make additional measures to clean (the connection will delay).
The most modern siphon is a decorative chrome siphon with revisions. In addition to the effective qualities of its structure, it has one hundred percent hygienic and functionality. Nevertheless, its value is much higher than standard. The sewage layout in this case is the built-in wall, which is also quite expensive.
Connecting an audit siphon is performed before the sink suspension, siphon from corrugations - focusing on the installation site and user convenience. In both cases, it is necessary to use a transition cuff with 32 mm with a diameter of the sink to the cash diameter of the sewer pipe nozzles, from 40 to 100 mm (it is worth looking at the place of installation).
Armature and mixer
Kitchen mixer device diagram.The most high-quality mixer is with a swing lever and a ball gate. By purchasing it, it should be verified that the faceted areas of threaded fittings of supply flexible tubes (Henc) are placed at various levels.
Henks are more durable (at the same time it is best to use metal-plastic options), but the installation of the mixer with their help is possible only in a pre-suspended sink, which is inconvenient. Henksa from plastic in the plastic woven plating can be pulled out through the slot under the sink outward and connect to the light.
Montage of shell
To implement all the necessary work on installing a washbasin in the kitchen, the following will be needed:
Schemes of the sink in the worktop.
- dowels;
- winding;
- screwdriver;
- New shell;
- silicone sealant;
- Original or wrench;
- Screwdriver or drill.
Article on the topic: Ceramic heaters: cheating of the manufacturer, pros and cons
Connecting a washbasin in the kitchen is carried out using a special suspension to the wall on self-stairs in dowels and regular brackets. Do not forget that even the full pedestal from the bottom of the washbasin to the plane of the floor is not carrying item.
The diameter of the screws should be the maximum possible and permissible brackets. Do not forget that the sink in any washbasin is suspended. If the diameter of special holes under the self-tapping screw is less than 6 mm, then they should be reserved or not to take this type of shell. Moreover, these "alternative" types of products are silhoualen (rather fragile) or plastic (fragile).
Installation and installation of washing
Connect and connect the washing in the kitchen in terms of strength easier due to the fact that it is equipped with a reliable support as a countertop. An exception can be washing with sinks placed under the tabletop, however, they are found very rarely and for their installation it is necessary to seek help from professionals.Nevertheless, in the issue of technological, kitchen sinks are more difficult, because it is necessary to work inside the furniture in the bent position. Naturally, the masters performing such a job take big money for her. Thus, if you have some experience in this business, it is rational to connect the washing in the kitchen with your own hands.
Exercise sealing
Absolutely all the current plumbing is equipped with regular gaskets. Work with them provides for the mandatory compliance with the following rules:
- Sealing work should be performed only on dry fittings. You can dry it with a household hair dryer if necessary.
- It is not necessary to take your hands for the conjugated planes, and those that you were touched should be degreed, flushing them with a dishwashing agent.
- Plastic pipes for standard fittings are provided with a margin, they should be trimmed into size.
- Paronite pads are located in the middle of parts from plastic and the supplying metal pipe.
- Rubber pads Before mounting should be lubricated using sealant.
Article on the topic: Grinding for walls under the wallpaper: White, what to choose for drywall, what is better, with your own hands, video, how to primed, acrylic, photo
Tips regarding knockboxes of washes in the worktop:
- Before the pattern of carved from the package, the template should be carefully examined and measured the tabletop with an inside. Cutting transverse supporting bars and a frame is undesirable.
- Before cutting (using an electrolybiz), it is worth it to be distinguished by the opening of the opening of a painted scotch. Lobsik's shoe can scratch either to drink a decorative coating, so that excessive caution does not hurt.
- Perform cut, not very laughing at the construction tool. Strong pressure can entail the deformation of the surface design.
- Silicone should be used for sealing. In this case, sealing is performed not only cut, but also a tabletop by 3-5 mm at the edges, so that the dirt is not formed from the flowing under the rim.
- Silicone drifting swees in the process of car wash should be immediately removed with a cloth moistened in a table vinegar.
Connection of a mortise washing can be performed under the table top. This shell is held on special overhead brackets and silicone. The base of the countertops is a natural stone or a modified type of wood of persistent and valuable breeds: ebony, teak, red crib.
It should be understood that the sink under the tabletop is a device characteristic of elite cuisine. Such structures are performed in a two or three-stage type. To connect them, they need a high level of skill and no significant advantages in front of other types of washbasins they do not have.