In our time, to increase the living space in Khrushchev, the glazing of balcony openings has become popular. Due to this room, next to which the loggia is located or a balcony becomes more. This dismantled box in which the front door is placed on the balcony. The main negative side of Khrushchev is its minimum size. For this reason, there is always not enough free space indoors. To solve this problem, the tenants come up with various tricks, the easiest and most reliable of which is to combine the room with a balcony. But how do you get glazed in Khrushchev balcony and what is needed for this?
Design features
In fact, the glazing of the balcony in Khrushchev is a rather difficult job. This is due to several factors, first of all, with the location of the balcony, if the installation is carried out on the 5th floor and above, then such an event can be in a penny. It is also important to know that there is a limitation of the permissible load on the stove.
However, in addition to these difficulties, workers face such nuances as:
- Status plate on the balcony. Often, at the time of the manufacture of the plate, a poor-quality concrete solution was used and after a long time he could crumble and come to the emergency condition. Therefore, to put a massive design on such a basis is strictly prohibited.
It is categorically prohibited to put a massive design on the collapsing stove.
- Insecurity of the design of the railings. This factor does not allow glassy balconies using metal-plastic structures. They should be replaced or apply auxiliary fasteners.
- Small-sized plate. Because of this indicator, in some cases, it is difficult to perform the glazing device together. Therefore, it is often necessary to install the frame with the removal beyond the plates, if it is allowed according to the characteristics and operational properties of the building.
- Height. If the installation is necessary for the fifth floor or higher.
It is important to remember that the installation on the existing fences without using additional strengthening is strictly prohibited. In case it is a dilapidated whole design, which will lead to irreversible actions.
Than glazed balcony
In order to glall its balcony, many use expensive materials that, in their opinion, allow the room to be isolate from outsiders, precipitation and penetration of cold air in the winter year.
If you correctly glazed the balcony with your own hands, it will look beautiful and neatly. For a design device, it is best to use frames that are made of materials such as:
- Wood is considered a warm material, which in turn has aesthetic appearance. But in the case of a wet environment, after some time, wooden flaps will burst and closed with difficulty.
- Plastic - is a practical material in making sash with your own hands. They protect the room well from cold air and are not afraid of moisture penetration. Despite its positive characteristics, the material has a rather heavy weight, which can badly affect the entire design of the balcony in Khrushchev.
- Aluminum - is considered a more competent option for execution of frames. It has the same positive characteristics as the previous types, but in addition to them, its weight is insignificant.
Each of the above listed elements has positive and negative sides. Which of the materials choose is to solve the owner. Looking at the balcony on this video:
Stages of installing with your own hands
In order to carry out the right glazing of the balcony in Khrushchev, there is a step-by-step instruction that contains the following items:
- First of all, it is necessary to perform an audit to determine the condition of the reinforced concrete plate and metal handrails. Only by doing this action will be clear which material is better to use for glazing the balcony. This is especially important for installation on the 5th floor and above.
- Next, it is necessary to decide which type of construction will be used in the work: classic or remote. After that, the required material is calculated. In case the last floor is the last, then it is necessary to decide which material to use for the roof. The easiest option for finishing the roof is Ondulin or Tile.
Install a durable metal frame
- Capital cleaning of the room from old plaster and extraneous elements is carried out. Ultimately the result will remain only one reinforced concrete parapet.
- In most cases, the design of the metallic type is contained in a deplorable state. Therefore, its collapsed layer should be dismantled, and on the released place to establish a durable metal frame and pour with concrete solution. Collect design follows using a welding machine.
- The construction of metal is fixed to two sides, that is, to the wall of the building and parapet. Pull-type supports are installed using welding, and must be observed in 45 degrees.
- The main part of the roof is done longer with a metal profile. It is fixed to the bottom of the roof, it is necessary to align the main frame. The protruding top of the design will act as a visor. It can be covered with metallic or galvanized material.
- The metal frame is trimmed, and then windows are inserted.
Check the video on how to glazed the balcony in Khrushchev:
It is important to remember that the installation of glazing and replacing the frame above the 1st floor requires the safety net. At the time of work it is necessary to use a safety cable. It is fixed on the solid construction of the building.
Article on the topic: Principle of operation of pressure sensors, consumption and level