Functions and properties of heated towel rail
The heated towel rail can perform not only the function of drying and heating the bathroom, but also serve as a design element in it. The installed design allows you to get rid of the bathroom with dampness and will prevent the appearance of condensate and unpleasant odor.
Connection diagram of the valve of the towel rail.
The size and shape of the heated towel rail can be completely different, for example, in the form of a staircase, square, are rounded or sheet, small and large, rotary. It is possible to use "dry" devices or oil filled.
Before buying a heated towel rail, it is required to determine which appearance will be the most suitable and preferred. You can choose a water, electrical or combined design. They may differ in manufacturing material, it may be stainless steel, brass covered with chrome. The color can be white, shade under gold, chrome, dark shades. Since the pipeline and the device will continue to be provided with water, the properties of which are with respect to the inner coating of the design with aggressive, then it must have anti-corrosion properties.
The principle of operation of the combined heated towel rail is based not only on water heating, but also from the electrical network, which is convenient during seasonal shutdown of hot water.
Installation and launch of the towel dryer do it yourself
Preparation for the installation of water heated towel rail
Connection node towel rail.
When buying a product, it is necessary to require a passport on it, where all the necessary information will be given. By purchasing a water heated towel rail to the apartment, it will be necessary to find out the level of water pressure indicator in the riser. It will depend on the type of house, floor, determined by the state of the water supply and the area of residence. When using a water heated towel rail, the thickness of the used pipes is important.
Article on the topic: We make the original flowerbed or flower garden do it yourself
Installation of a new device at the place of the old requires to dismantle the previously used heated towel rail. It is possible to install a water heated towel rail anywhere where hot water is supplied. An important parameter for regulating the water construction for drying is the operating pressure indicator.
Materials and tools that will be required to install water equipment for drying:
- Heated towel rail.
- Pipes.
- Brackets.
- Adapters.
- Bypass (jumper).
- "American" having an internal thread.
- Bulgarian.
Installation circuit towel rail.
Water-type heated towel rail is attached to the wall using special brackets that can be adjusted by changing the distance to the wall. Pipes that are lubricated to the drying device can be hidden in the wall, which is tiled from above. This option is the most time consuming.
Installing the device requires measurement for a landing distance. When replacing old pipes to new, with the purchase of a heated towel rail, there should be no problem, you can purchase a device of any type to your taste. New pipes are mounted for a new model for drying. When replacing the equipment, repel from the previous water supply layout. Buy the device in this case follows, measuring the length of the distance between the discharges.
The diameter of the device nozzles must correspond to the diameter of hot water pipes. In this case, the selection of adapters is carried out, taking into account the transition to another diameter from the previous one.
Features of the installation and launch of the water heated towel rail
Connection diagram of stainless steel heated towel rail.Installing an adapter from a device with a smaller diameter on pipes with a large diameter is unacceptable. Since, according to the law of physics, the free flow of water on hot water pipes can lead to the fact that the pressure value in the device will increase. By connecting the device, it is impossible to allow an accident. You can connect it with the pipes with the pipes by performing the installation using detachable connections having a cape nut, that is, "American women".
The best option will be the installation of a ball valve at the output and input from the device. In this case, the mounting of the jumpers, i.e. bypass, will allow not the overlap of the entire pipeline with hot water, which is unacceptable in the cold season. Overlapping water access to the device with cranes will not break the further flow of water in the riser on the jumper. Disturbance of working pressure in the system will not happen.
Article on the topic: glass cholester for plasterboard surface: advantages and rules
If a rotary device is bought, which can be deployed 180 °, it is possible to install on the basis of rotating brackets installed above fixedly fixed equipment for drying. Alternatively, a heated towel rail, which has hanging crossbars.
On water devices, Maevsky's crane is provided in order to fill them with water in order to not have the formation of air traffic jams. As a rule, such cranes are located at the top of the installation.
The initial launch of the heated towel rail will be accompanied by the full filling of the water of the device at the expense of the crane Maevsky, which will avoid problems with the incidence of air.
After installing the device, it is filled with hot water, smoothly and alternately opening the taps. When installing and starting, it is important to have professional skills that will allow you to prevent the hydrowood and flooding a neighbor's hot water. Therefore, a simple turning off the water during installation is not enough.
How to install and run electrical and combined towel rail
Installation of the electric heated towel rail differs from the installation of water. The network-operating towel rail is installed when the water installation is not possible. The equipment is equipped with a temperature regulator.
Device towel rail.
For the electrical model of such a device, pipe supply and installation of cranes will not be required. The main requirements for installing the device are:
- Disconnect hot water in the pipeline.
- Installation of bypass having three valves. One - for overlapping the movement of water inside it, and two others - for connecting to the device.
- If you have a bypass, it should be opened during the dismantling of the system - water will be freely circulated, while other cranes close, stopping the supply of hot water.
- The distance from it to the sink, the bathroom or shower should be at least 60 cm.
- Devices operating from the electrical network can be installed in the loggia, kitchen or on the balcony.
- Connecting to the power supply network of the device is performed using a fork and a socket, which is an open method.
- A hidden connection method is possible if the wire system is picked up into the wall or for decorative panels.
- An important point to start the device is to set a grounding and protective shutdown (UZO). This will ensure absolute operation of operation.
Article on the topic: Wallpaper finishing options
Heating most devices for drying from electricity does not exceed 60 ° C, and electricity consumption will be 25-1200 W, which will depend on the power of the equipment and the model. It will provide a drying, regardless of the periodic outages of water - seasonal or in order to prevent.
Any electrically sweater must be equipped with a timer and a thermostat that allows you to adjust and monitor the process of starting the device. It has an emergency shutdown system.
The launch of the heated towel rail requires compliance with the chief criterion - security, which will eventually depend on the quality of the installation of the device in order to connect it. Before purchasing goods, you must require the seller warranty and check the level of application applicability for home communications. It should be remembered that the equipment can withstand weight no more than 5 kg, so it is impossible to allow its overload when drying things on it.