Beautiful interroom door is a deposit of comfort in the house. Especially if it is established in compliance with all rules and technical requirements. In order to initially make the right choice of the door design, it is necessary to measure the doorway before buying. As a rule, the width of the doorway of the interior door in the panel house is standard - it ranges from 60 cm to 120 cm depending on the functional purpose of the room. However, there are doorways and non-standard sizes. It is rather an exception to the rules. The width of the doorway of the interior door during repair can be increased or reduced depending on the individual preferences of the host.
Table
Width of the doorway interior door SNiP - how to calculate
Despite the fact that the doorway, namely, its width must meet the standards of SNiP, before making the repair it is necessary to remove the size by which the interroom door will be bought. The width of the doorway between the rooms may vary depending on many factors. For example, a panel house is always built with narrower walls than brick, respectively, and the width of the doorway in it will be less. In most cases, the dimensions of the doorway are calculated depending on the dimensions of the door frame (provided if it is standard):
The width of the doorway is calculated taking into account such initial parameters as the size of the canvas, the thickness of the box and the gaps, which are needed to install such a design as the interroom door in the doorway. If the standard door design, for example, "Sophia", has parameters such as a web 80 cm, the thickness of the box is 6 cm and the mounting gaps of 2 cm, then in this case the standard width of the doorway of the interior door should be 94 cm. And it is calculated According to the formula - the size of the canvas + double box thickness + clearance for mounting. In our case, it is 80 + 12 + 2 = 94 cm.
Article on the topic: Methods of mounting stone washing
Requirements Snip to the installation of interior door
How to choose an interroom door if the width of the door opening is standard (or vice versa) using the formula dealt. By doing repairs in an apartment that implies the replacement of interior doors, it is worth considering the requirements of modern SNiP, so that in the process of operation of the door design, do not encounter inconvenience. It is worth noting that the requirements for the installation of such structures as an interroom door One or two-dimensional resurrection in the doorway is very much. They depend on many factors, for example, what material is made of a door frame and a canvas, as well as in which house will be carried out (brick or panel house). Among the entire diversity of rules, the SNIP is also allocated for the standard system of rules that must be guided by workers during the installation of interroom door design:
- So, on the standards of SNIP, the interroom door after installation in the doorway, namely the door frame, can deviate vertically by no more than 3 mm.
- The side stands of the door must be mounted at least two points of support on each side. And the distance between these points of the support should not exceed 100 cm.
- If the repair is performed, the interroom door is installed in the doorway so that in the open position its sash does not overlap the adjacent doorways. The standard design of the interior doors "Sofya" provides for the possibility of changing the side of the opening of the main web.
Calculation of the thickness of the doorway
Not only the width of the doorway is a key parameter to select a suitable size of interroom doors. Be sure to pay attention to the thickness of the opening. As a rule, a brick or panel house is characterized by almost the same wall thickness - 7.5 cm. On these sizes and manufacturers of interroom doors are oriented. However, if the wall does not correspond to these parameters, after installation, interior doors will not look completely beautiful due to the lumen between the platband and the wall.
Article on the topic: Panel in the bedroom do it yourself: master class
How to choose the appropriate version of the interior door depending on the thickness of the doorway? To do this, you need to remove the measurements of the thickness of the wall at least in three places and, thereby, it is possible to determine the curvature of the wall. If there is no essential, a good wizard will find a good wizard, how to install the door and rectify small irregularities (curvature) of the wall.