In modern apartments and country houses, holders from time to time you have to update the paint on the furnaces, fireplaces and fittings. It must be done not only for the beautiful appearance of products, but also to extend their exploitation, convenient use. For decoration of thermal structures, a special heat-resistant paint for furnaces, fireplaces is suitable.
Heat resistant paint
What to paint oven or fireplace
The design of the furnace or the fireplace consists of several elements: the main body of brick or stone, dampers, handles, doors, frames, etc. Update the protective coating is necessary for all the product. For surface staining, special bases are used that withstand high temperature. Depending on the composition and structure, heat-resistant paints can be different. Some are suitable for stone and bricks, while others can be used to dye parts that do not have direct contact with fire, heat.
Conventional paint cracks
The heat-resistant paint for the stove is obliged to be resistant to a temperature of 350-400 degrees. Most of the paints are withstanding 600-750 ° C. And if the heating is carried out with coal, the heat in the furnace can reach 900 degrees.
Heat-resistant paint for metal
It is better not to paint the heating structures with ordinary paint, because At high temperatures, it sweeps, changes the color, smokes, melts, "enriching" air with its chemical aroma. Some homeowners sometimes use household colous means, but after time they have to redo work. Therefore, save your strength, money and do everything correctly: The heat-resistant paint for the stove or fireplace must comply with your requirements.
Choose heat-resistant paint: Options Overview
For boilers or an iron furnace, which is often used in domestic baths, it is better to use paint for metal, resistant to a temperature of 800-900 ° C. For a brick design, a thermocracy is suitable, which is withstanding up to 200 ° C. Selecting the finish, remember that it should be suitable for indoor use and sustainable high humidity. For painting, heat-resistant, heat-resistant, refractory paints are suitable. Fire-proof use it is impossible, because They withstand minimal heating (up to 200 ° C), and then swell, cause the design of the design.
Article on the topic: The ceiling of boards do it yourself: arrangement
Painted fireplace
Heat resistant can be used at temperatures up to 600 ° C. They are suitable for furnaces and fireplaces made of metal, parts on a brick design. In the baths it is impossible to use it, because Here the temperature rises to 800 ° C. For these purposes, there is a thermocracy that easily transfers 1000 ° C.
Fireproof painting products for metal withstand even open fire, so they can be used at very high temperatures. But in domestic conditions this basis should not be applied: expensive and meaningless. High temperature is used to cover heating systems, engine parts. They perfectly serve at temperatures up to 200 ° C. This base is suitable for painting seams, tinting an outer brick surface.
Silicate paint
Heat-resistant varnishes can be used if the temperature does not exceed 300 ° C. Such a varnish is widely used for processing brickwork, which gets aesthetic appearance, bright color.
The outer part of the brick furnace can not be painted, but to improve its appearance with the help of plaster. From above, you should apply a solution of lime, chalk or coating with water-level paint.
Brick painted
If a heat-resistant base for a fireplace or an oven is contained in a bank, can be painted with a roller or brush. For a spray, no additional devices are required, and the layer will be smooth. This is important if the design is located in the house and constantly in sight.
Where to start painting
By choosing heat-resistant paint, do not rush to apply it to the surface of brick or metal. If the packaging shows the preparatory stages, be sure to follow the recommendations. Basically, the painting requires such actions:
- Purification of the structure from fat, salt, old coating;
- Rust removal using emery paper or sandblasting;
- Drying and thorough wash;
- Degreased by a solvent and painting in 6-7 hours (but no later than a day).
Article on the topic: How and what to whiten the bath at home
Claiming Circle on Bulgarian
So that the thermocracy for fireplaces and furnaces is evenly distributed in the design, apply it to different directions. Then the surface is better finished and it will look beautiful.
Palette of colors
If you need to apply a second layer, wait for the previous layer to dry out and only then continue to process the surface. Thermocracy should be high quality: Look at the date of manufacture, composition, name, manufacturer address. If some information is missing, look for another product, otherwise you risk harm to health.