The water-making paint has become quite popular. And all because it is practical, has a low price and easy to use. And also a weighty plus in its smell. It is not so sharp and caustic, so it can safely be used for internal works. After painting the ceilings, walls or anything else, traces of paint remain on the floors.
How to wash water-emulsion paint from the floor
Before laundering a water-free paint from the floor surface, you need to figure it out.
- polyvinila acetate (it is based on PVA);
- silicate (solution of liquid glass with a variety of additives);
- acrylic (the composition includes acrylic resins);
- Silicone (in the composition of Latex).
How to rain paint from linoleum and other surfaces if it is polyvinila acetate
With polyvinila acetate paint cope easier, as it is made based on PVA glue. The remaining traces on linoleum and other coating are easy to remove using a soap solution. It should be applied to the surface of the floor and rub the brush or rigid face of the sponge. If the stain of the water-emulsion polyvinila acetate paint managed to dry, abundantly moist it with water and leave for a while. Then should act in the above example.
How to rain acrylic paint
If acrylic paint is not dried, it is enough to wash it with soapy.
While the acrylic dye does not dry, it is not so difficult to remove it. But when he dries, he changes the properties and cope with it becomes much harder. In the production of acrylic uses film consumers. They are responsible for casting paint. The film former is harden about 30-60 minutes.
Article on the topic: Coffee table from a tree trunk with their own hands
If you notice the contamination before the expiration of the specified time, sufficiently heated water, soap, and sponge. First, wash the stain with a soap solution, and then wipe using clean water.
If after the appearance of the spot on the linoleum passed several hours, it is necessary to act like this: take any degreasing means: vinegar, alcohol, dishwasher or solvent. With the help of any of the compositions, it is possible to soften the water-emulsion acrylic paint. Mock the evaporated place on the floor abundantly. Softened paint remove using a soap solution.
Outdated stain acrylic paint will help soften alcohol, gasoline, White spirit.
If more than a day passed, more "strong" means will be required. The dried acrylic stain softened under the influence of gasoline, "White spirit", kerosene, acetone or brake fluid. Take a tissue napkin, pour the selected solution on it and apply it to pollution. For half an hour, change 3-4 times. When acrylic softening, remove the napkin moistened in the same means.
If no appropriate means turned out at hand, do not be discouraged. Try to get rid of paint using hot air from a construction dryer. Spot moisten with soap solution, and then heat. When acrylic becomes soft, remove it with a tissue napkin moistened in a soap solution.
How to clean the floor from silicate paint
Water-emulsion silicate paints are rather durable, but are not suitable for staining in rooms with high humidity. The evaporated place from this type of dyes is also very easy to remove. Apply water to the polluted section, well read the brush.
How to remove silicone paint from the floor surface
Silicone paints, as well as acrylic, are in their composition resin. They are not inferior to acrylic, but still moisture-proof and countertileous. To remove them will have to apply special means. You can purchase them in construction stores. Means for removing silicone water-level dyes have a thick structure. This makes it easy to apply it to the right place. They act very quickly, some begin to eat paint after 2-3 minutes.
Article on the topic: Bead beam: Weaving scheme for beginners with photos and video
Before applying a solvent Silicone tool, scratch the stain from the paint with a metal brush or another convenient tool to impair the water-repellent layer of silicone paint, then the means will soften it faster.
Apply a solvent using a brush. Hold the time specified on the package. Then screens up the fan with a spatula. Follow it clearly in accordance with the instructions for use. After using solvents well, rinse the place of removal of clean water.
When working with chemicals, observe security measures.
When working with aggressive chemicals, it is necessary to put on dense rubber gloves, glasses and a respirator. This will help secure yourself from getting on the skin and mucous membranes of a dangerous, caustic substance.
The room in which you work should be well ventilated, otherwise you can poison the solvents. And also experience the solvent on the low-welcome area of the floor, for example, in the corner, behind the curtains or where the furniture will be.
Today, the construction market offers a wide variety of dyes. If your choice fell on the water-mounted paint, then reading this article, you will learn about its main species. And also about the ways to remove it from the places where she fell by chance. It is important to remember that only the stain right to remove much easier than dried. Therefore, be careful and your repair will only bring positive impressions.