The entrance door is precisely the element of the room, which is primarily striking, and what your guests necessarily pay attention to. That is why the decoration of metal doors to give them a more aesthetic appearance is a very important aspect in creating a common style of an apartment or at home. I note that the door facing is no less important than its technical characteristics.
Selection of finishing material
Relatively recently, the decoration of the inlet metal doors was not as widespread, but there was no speech on particularly elegant and stylish solutions. Often covers enamel, but after some time, with a change in the main technologies of production, new approaches to the decoration began to occur.
At the moment, the range of materials that can be used for this is too extensive, so the ordinary user will be quite difficult to figure out the entire presented manifold to choose the most appropriate option. The selection of the material is entirely depends on what kind of design solution you have chosen, and which cladding should be ultimately.
If it was decided to design the entrance door at once with several materials, then they must be mandatory to be combined with each other, creating a single image.
As I said, there are many materials that can be used to finish the entrance door. Perhaps the most widespread is laminate, due to its low cost, similar to natural wood and strength. Another solution is the use of artificial leather. Perhaps this decoration of metal doors is the most outdated, as it was used in the times of the Soviet Union.
Article on the topic: The method of growing seedlings of the house
But if in Soviet times, poor-quality material was used, then artificial leather is used, according to the characteristics, it is not inferior to genuine. If you decide to separate the metal camp, then be to a huge number of options proposed design options, as this material allows you to create really interesting design solutions.
Not so long ago there are doors, the panel of which is covered with special powder paint, which is a mixture of polymers and a metal powder. Despite its "youth", such a finish is already popular, due to its resistance to external influences. Another pretty old technique for protection is to fade with clapboard. Pluses this method is quite a lot - sound insulation, strength and pleasant appearance, but it is quite complicated to care for such a coating and takes a lot of time.
Another new, but already popular material for such a finish - MDF. Many modern manufacturers of door structures prefer to produce metal doors with MDF decoration. The fact is that this material combines many positive qualities - the available cost, the absence of chemicals in the composition, compliance in processing and much more. The only minus - metal doors with the MDF finishing after damage cannot be restored, you need to complete the finish replacement.
Installation of facing
As I said above, there are many options to turn an unsightly metal box in the original door design. Materials for this can be used completely diverse. Positive and negative aspects of their use are described above, but do not forget that there are certain differences in the installation technologies, which is also quite important.Laminate
This material is great for those who want to make facing as low as possible and quickly, because to lay the laminate on the metal box of the door design can be both hands. The installation method is quite simple, as it is based on the method of connection of the key type already existing in the laminate.
Article on the topic: Homemade moisture meter separator for the compressor
The sheets are connected to each other with this "lock", and the fasteners of the structure directly to the door are performed using an adhesive solution or self-tapping screws. If you want the laminate to not only retain the inner peace of the house, but also externally remained attractive, choose a more expensive variety of material covered with a protective film. It will save the door from the negative impact of moisture, and also protects from scratches and shallow damage.
Lining
Finishing with lining makes it possible to choose from a variety of design solutions exactly the design that perfectly flies into your interior. It is enough just to arrange at different angles of racks or use decorative strips, and your door will turn into a real work of art. If we say not only about the outside of the question, but also to consider its internal conflict, which is that the tree to metal nails cannot be nailed, one single method arises, with which this type of facing can be carried out. It is necessary to make from fine slats framework, which will be attached to a metal reservoir using metal screws. Decorative elements in the form of ridges are already shedding. Additionally, the emptiness between the door and the frame can be filled with insulation.Powder spraying
The door covered with powder spraying is considered antivandal, since after decoration it does not give in any damage and scratches. Such a coating is rarely used for the entrance doors to the apartment, most often it can be seen on access and tambourines. The process of applying such a coating is quite interesting.
The door at the beginning is covered with a metal and polymer powder, after which he warms with very high temperatures in a special chamber. In the process of heating, the powder is melted and forms a solid protective coating.
Wood
The decoration of the metal door using wood is considered the most elite option, as it immediately gives a residential prestigious and elegant look. This finish is made due to the stickers on the metal part of the door of wooden panels prepared in advance. I want to note that this is perhaps the most expensive finish method, the cost of which directly depends on the selected tree of the tree and the presence on the thread surface or other decoration options.
Article on the topic: Ceiling cover with your own hands from A to Z
Video "Door upholstery do it yourself"
The record shows how you can make upholstery with your own hands at home.