The table that you will see in this master class is perfect for those who live in small-sized apartments and has a very compact kitchen. It can also be used for the equipment of a small coffee table on the loggia and the balcony. The table is convenient that in the assembled form it looks just like a picture attached to the wall. In the unfolded - it turns into a compact table, designed for two people.
There is no phased process manufacturing process, but there are visual photos, for which all components of the elements of this object of furniture are understood and how they should be located.
Materials
For the manufacture of folding table with your own hands, you will need:
- big piece of board;
- lumber;
- furniture loop durable;
- drill;
- roulette;
- fastenings;
- screwdriver;
- Pencil with eraser;
- level;
- Lobzik;
- Paints, Morida, Varnish at will.
Step 1 . Initially, this project was made by the board-table with fastening. If you find a suitable format, the board that will not need to trim - excellent.
Otherwise, make a tabletop you will need from narrow boards. At first glue them using carpentry and clamps. After strengthen the design, on the bottom side of the screws, having previously done the holes-pockets.
Step 2. . Further, if desired, can decorate the worktop. In this case, it was manually painted and then covered with varnish. You can also do with the verse, if you wish to save and emphasize the texture of the tree, or cover it with paint suitable tone interior.
Step 3. . The countertop must be fixed on the wall using a wooden bar and furniture loop. It is important to do it strictly parallel to the floor.
Step 4. . So that you can decompose the table, you need to make brackets for it. They will be located under the tabletop from the side. In fact, the brackets will be triangles. To give them an orphanage with one of the sides, as this case, or not, to solve you. The main thing is to determine the parameters. Elements must withstand your worktop without difficulty.
Article on the topic: Cow, Sheep and Googl Amigurumi. Knitting schemes
Step 5. . It is also necessary using the level to determine the correct position of the brackets. Alignment and calculations, in fact, the main thing in this work.
Step 6. . After the brackets are ready, you can also cover them with varnish, leave to complete drying and, after the furniture loop, roll to the wall.
In this case, the flaws were still allowed, so the brackets had to lock small wooden lumps on top. Try to avoid so that the product looks aesthetic.
Pay attention to the location of the loops when closing the table top. The brackets must go under the table top and fit tightly to the wall, not speaking behind the fixture, so that the table is not shaking.
