The plastic balcony door does not close: how to fix malfunctions

Anonim

To date, plastic balcony doors are installed in most apartments, office and office space. It is not surprising because they look in appearance beautiful and modern, moreover, it is pretty closed - it is important when the window is low air temperature. Plastic doors to balconies are installed with windows, which is called a balcony unit. Balcony blocks are currently an indispensable element in any construction. This design consists of a balcony door and windows bonded with a plastic connector. They serve to access the loggia, separating the room from the balcony.

The plastic balcony door does not close: how to fix malfunctions

Plastic doors to balconies are installed with windows, which is called a balcony unit.

However, no company for the production and installation of balcony blocks, despite all the criteria for the reliability of these structures, will not be able to give an absolute guarantee that they will never break. Often their owners face a problem: the balcony door does not close. The reasons for such a malfunction can be different. Let's deal with more details.

List of possible troubleshooting

In case your plastic balcony door has become badly closed or does not open, it is necessary to deal with that it could serve this reason.

There may be several of them:

The plastic balcony door does not close: how to fix malfunctions

Worn or damaged seal - a common cause of problems with a plastic balcony door.

  • breakdown fittings;
  • skew;
  • Damaged double glazing;
  • worn sealing;
  • Schedule loops under the weight of the sash;
  • Changing the shape of the sash (may occur under the influence of temperature).

We highlight the main signs of faults:

  1. It touches the frame in the middle part. This means shifting the sash horizontally or its deformation. Causes of this phenomenon can serve a loop or temperature deformation.
  2. Damage to the knob and lock: in this case, you need to replace the broken parts.
  3. Violated the work of the clamping mechanism. It is manifested as follows: the balcony door does not close to the end even when the handle turns, and the clearance is formed between the sash and the frame. In this case, the presser needs to be done more dense and tighten the door.
  4. A sign that the sash kicked under its own weight can manifest itself in this way. For dense closing, it is required to raise the shutter for the handle with great strength, as the balcony door has become the bottom of the threshold.

Article on the topic: How to make a transition frame for radio with their own hands

The plastic balcony door does not close: how to fix malfunctions

In some cases, to repair the adjustment of the clamping mechanism will help.

Trouble-shooting

In many cases, malfunction can be corrected independently, without causing a professional master.

To eliminate disorders, the following tools will be needed:

  • pliers;
  • Flat screwdriver with a wide slot (sting);
  • adjusting keys that are selected in accordance with the form of adjusting screws on the loop;
  • Screwdriver cross.

Troubleshooting instructions depending on the cause of their occurrence

The plastic balcony door does not close: how to fix malfunctions

Using the adjustment key, near the top loop, you need to rotate the screw clockwise. As soon as the sash is attracted to the loop in the desired way - close the sash.

1. If the door has saved under its own weight on the loops. This malfunction can be eliminated as follows:

  • Open the door. We set it into a swivel position;
  • Using the adjustment key, near the top loop, you need to rotate the screw clockwise. Once the sash is attracted to the loop in the desired way - close the sash;
  • Raise the leaf using the lower loop screws. It is worth noting that often hinges are covered with protective caps. Therefore, to get to the screws, the caps should be removed by using a screwdriver or knife;
  • Using the screw on the end of the bottom loop, you need to lift the leaf so much so that it does not hurt the frame with the bottom edge.

After all regulatory stages, be sure to check how freely the balcony door is closed.

2. If the clamping mechanism is broken: the gap appeared between the sash and the frame and the cold air penetrates into the room. To eliminate this malfunction, it is required to regulate the clock door clamping door.

For this, using the adjusting key or pliers, you need to rotate the locking elements (pin) from the lock side until the desired degree of tightness is achieved.

3. When shifting the sash (when the balcony door hits the frame in the middle part), you need to move the sash closer to the hinges. Make it possible by the following actions:

  • The adjustment key must be installed in the side screw of the bottom loop and rotate it until the lower corner of the sash is attracted;
  • Next also adjusts the upper loop: using the adjusting key, the screw rotation is rotated near the upper loop clockwise. The sash must be closed as soon as it is tightly attracted to the loop.

Article on the topic: High-quality wooden bunk bed do it yourself

If the loop adjustments are not enough to eliminate the problem, it is worth calling the masters.

The plastic balcony door does not close: how to fix malfunctions

Scheme adjusting the HDF (shut-off elements). You need to rotate the locking elements from the door of the door lock until the desired degree of tightness is achieved.

Advantages and disadvantages

The following can be attributed to the following:

The plastic balcony door does not close: how to fix malfunctions

Plastic balcony doors - reliable protection against noise and cold weather for many years.

  • Beautiful appearance;
  • high sound insulation;
  • the possibility of microwave (if the door is made rotating) - to provide in the room of fresh air;
  • close tightly, due to which a constant temperature is maintained;
  • possess anti-corrosion resistance;
  • do not require additional finishes and painting;
  • have a long service life - up to 30 years;
  • Easy wash.

However, there are some shortcomings:

  • Opened only inward, and only the closing bracket is mounted outside;
  • When they are installed, a high threshold is made (if it is lower, cold air will penetrate into the room);
  • Their width should not exceed 1 meter, otherwise it does not avoid sagging over time.

Despite the great popularity of plastic balcony doors in apartments and business centers, malfunctions can periodically occur in their work. Many malfunctions can be eliminated independently. If you do it problematic, call the professional employee for installing plastic balcony doors.

Read more