The tie has long ceased to be only part of a male image. Women borrowed from men this stylish accessory in their wardrobe. Moreover, in the women's image, the tie found a special refinement, giving the owner of this subject dryness and extravagance. Sometimes, for the dress, a woman needs a certain style and color tie, which can not always be found in urban stores. In this master class, we will tell you how to sew a tie with your own hands to solve this problem.
Required materials and tools:
- main fabric;
- lining fabric;
- threads in tone tissue;
- sewing supplies;
- sewing machine.
Bending lines on tie fabric
How to make a tie with your own hands? Cut a piece of cloth with a size of 27 x 54 cm in half the arrow length so that two squares are 27 cm. Fold one square in half diagonally, as shown in the photo, and press it. These are offset lines.
Strip details
Attach the fabric template. Cut pieces. Deploy the front, middle and rear. The front and middle part should consist of two parts, as the letter "M" at one end, and the middle part will have at both ends "M". Now it is necessary to reduce these points as follows: Position the front part of the front side. Put the ruler along the inner edge of the point and on the right side of the part, expanding the angle of the point, as shown in the photo. Cut the desired detail along the angle. Repeat these steps with the other parts. For the middle part, cut the first end with an external point on the left side. Then turn the item and cut to show the point to the right. You should have a trapezoid form, as shown in the photo.
Article on the topic: Wallet from beads: Master class on crochet with schemes
Sangered the edge
After all actions you need to get such details: the front part of the tie, the end of the tape, the closest part of the tie, lining, front and inner lining. Check out the folds. Place them from the wrong side. Put the lining fabric and start it. Cut the fabric around the front, middle and rear part.
Sevive lining
Place the lining detail on the tie tongue with the withdrawal side down. Secure the needles. Stretch on the sewing machine. Now fold the edges of the long side and press, quickly fold the edges and press it. Put the tie under the press.
Stitching tie
Then bend the edges inside the tie and insert the lining. Find the iron and start the bends. Now starting from the bottom edge, start manually sewing the sides of the tie. To demonstrate, we used a red thread, but you will go thread that is suitable for your fabric color. Well tighten the thread and ribs of the sides. Continue until you reach the end. Follow the finished tie.
