Once the bar racks were used only by appointment: sit down and drink in the Pite Center. Somehow they moved into the kitchen, and they got talked. The item was very convenient, especially since it suffered noticeable changes and a modern bar counter for the kitchen has a variety of design. Its options can be very different in design and style, and the functional purpose they can also be different.
Purpose and species
If the area of the kitchen allows, the bar counter in the kitchen is put on direct purpose: sit down a cup of coffee or something stronger, something to eat. Then "Equipment" with her respective: holders for glasses, fuels, glass, near the shelf / molders of juices, bottles, etc. They put it with one edge on the wall or edge of the kitchen headset, sometimes placed in the form of the island - in the middle of the free zone.
Barna Stand in a large kitchen
In small kitchens, it is often multifunctional. It can be used as a separator for zones - dining room and kitchen, on very small squares is often used as a dining table. Moreover, it can be located non-standard - at the wall.
Bar rack along the wall
In the kitchens of medium sizes - 10-12 meters - often performed in the form of a peninsula - a small protrusion on the side. In order to more rational use of space, the place under the tabletop is occupied by the shelves or cabinet. Such a design is very simple - the bar stand bar often relies on several pieces of direct or inclined pipes fixed on the table of the cabinet.
Bar rack in the kitchen - Peninsula
Similar multistage kitchens have recently become popular: different operations in the kitchen are more convenient to perform on surfaces with different heights.
Two surfaces one over the other
The surface of the rack is slightly shifted relative to the table
But, nevertheless, more often, the bar stand for the kitchen is present in the studios apartments to distinguish between two zones: a kitchen from the living room or from the hallway - who has something united. Moreover, it is often a continuation of the desktop-island or peninsula.
Bar rack for kitchen as a continuation of the island
They are still in the form of a partition. In this case, the base is most often of the drywall, and it "adds" to it - from above or side - the surface.
Plasterboard Bar Partition Bar
This option is easy to make
The basis may be brick
In general, variations, variations and different species a lot. Adjust the idea that I liked under your conditions, and you can proceed to implementation.
Dimensions and dimensions
There are no strict standards on this. There are some recommendations that are violated at about half of the cases. Recommendations relate only to the height and width of the table top:
- In height, the bar counter is customary to do 1.1-1.2 meters. Then there are special high chairs near her.
- By width - at least 30 cm, optimally 50-60 cm. Less than 30 cm should not be done: even a small plate on such a tabletop will be in danger. And it's just uncomfortable: neither elbows put it, nor lean.
Long, shape, quantity and shape of the legs are all at your discretion. By the way about legs. Traditional racks that were in the Pite establishments are a tabletop on the end. But for some reason a tabletop on one tube from the floor is considered for the kitchen "classics" for some reason.
Something like this rack is considered in the kitchen headset classics
By the way, in this form it is almost not used. More functional analogs with cabinets and couches are predominant.
Article on the topic: How to calculate the number of self-tapping screws for attaching plasterboard?
Bar rack for kitchen: Stages, Methods of manufacture, Photo reports
The easiest option is the classic one: the table top attached by one edge to the wall or furniture, and the second rest on the pipe. There are options with the worktop:
- Make a wide board, preferably not a coniferous breed - they have too soft wood.
- Order in the same company where the kitchen set did. If you bought ready, you will have to look for a similar material on a photo or carry with you a small spare part with you to demonstrate what you need.
- Make from thick plywood, then decorate something - paste plastic, tile, mosaic.
Everything else is better to choose in the store selling furniture fittings. The choice is very wide, and the variation of prices is at all amazing. For example, the pipe of the same diameter can cost three times more. But such a difference is not good. With cheap Chinese pipes / grids / basket Chrome starts after some time with flakes with flakes. German accessories have a very high price tag, but a lifelong warranty, Poles - in the middle and by price, and in quality. The choice is yours.
Homemade Bar Rack For Kitchen from Board
In the photo above - the homemade bar counter, which made from the thick board. It relies on the one hand to the shelf attached to the wall (also from the boards of the inches). The second support is a traditional tube. A hole of the suitable diameter is drilled under the tube of the tabletop. Under the table top on the pipe is installed nozzle-focus "Ring Fastening", the hole is closed with a decorative ring. There is also a "sank" or universal fastening of the pipe to the floor and ceiling, as well as different holders and shelves on it.
If the countertop is attached directly to the wall, the corners usually use for these purposes. You can take reinforced, and choose the color on the basis of the finish. But this type of fasteners are installed so that it is not visible - several centimeters retreating from the edge. You can put several small corners, or one solid.
Holders for shelves can be put under the tabletop
If it is decided to make a bar counter in the kitchen along the wall, you can use the decorative brackets for the shelves. Their carrier ability should be enough for a worktop, especially since you can deliver a few pieces. An example of assembling a bar with a simple design with a pipe in the photo below.
Photo report №1: homemade tabletop rack and pipes
The countertop was cut out of the window sill (array), the edge was rounded, polished, toned and covered with varnish. Parts - Bar leg, brackets and retainers to the floor - bought in the furniture fittings department.
This is the source data
Connect the stopper to the table top, to the edge - corners. It gets all the screws with a flat hat. Work takes about 7 minutes.
The main part is assembled
Attail the collected rack against the wall, mark on the wall of the place where you need to install a dowel. On the floor, we supply the pipe with a marker: on this label we will exhibit the backbone. By labels, mount the stop for the rack, put a dowel into the wall.
Preparatory
We put the rack in place, creating screws. Everything. Ready.
Simple bar rack collected with her hands
Bar racks with shelves
If the design with the pipe does not like, you can do without it, but you will have to remove the upper part, which is under the ceiling. Instead of a leg, for example, you can make the same shelf as near the wall. The species will be immediately more dynamic and modern.
Sketches of uncomplicated in the manufacture of bar racks
And in general, the whole design can be collected from wide boards, I joking them at right angles. Looking at the photo below, you will understand what it is about.
Article on the topic: Make-up: About Stylish What is it, Sourling and Repair, Alignment and Device Coating, Lags and photos
Bar rack for the kitchen in a modern style (for minimalism and high-tech too)
In modern interiors, broken lines fit in general. If the kitchen is in the style of minimalism or hai tech, then the classics is hard to enter there, but something consisting of broken lines will look very good (several sketches in the picture below).
Bar racks for the kitchen in the style of Modern
A slightly more traditional option is presented in the photo. From this he did not become less interesting. A non-standard approach even in minor doses changes significantly perception.
Option Bar Stroke - Table
Bar rack based on
All this we considered options without reason. But the countertop can be attached to some tumbler. If the countertop is accurately over the surface of the table, we take the pipe and standard fasteners to horizontal surfaces. If, as in this case, the surface of the bar rack is shifted, there is a special sloping fastener.
Countertop attach to the wardrobe - easy and simple
The tube can be made it yourself. Actually, the main thing is to collect the framework. It can be seen with furniture plywood or other finishing material - it depends on the style of your kitchen. The frame can be made of wooden (dry) rails, and you can cook and metal corner.
You can dance on such a rack
As an option - to collect from the profiles for drywall, to obey them or GVL. Another option is to fold the foundation of the brick. But this, if the carrier ability of overlapping allows.
Loft style
With the basis of plasterboard: photo report number 2
Frequently select the device from the plasterboard. The material is inexpensive, the technology is tested, the mechanics are familiar, the result is at least good. In order of work, no news: collect the framework. In this case, wooden bars are used, but it is also possible to use profiles.
Collected frame
The main thing is to observe the vertical and horizontal planes, put the racks exactly at 90 °. It is checked with a good construction level, the verticality is better to keep track of the plumb: it does not have errors. When the frame is assembled, from two sides is trimmed with a hikington or GWL.
Plasterboard sheets are mounted
Footprints from self-tapping screws, corners and joints put sand. Further depends on the selected type of finishing: under some need a putty (painting with water-emulsion), there is no under any. In our case, textured paint was chosen, it is applied with a thick layer, and can be directly on plasterboard.
Covered in texture paint
It remains to install on the bar counter desktop. Choose what is more suitable for the rest of the furniture in your kitchen.
Photo report number 3: Bar rack with washing
It was the first experience in creating furniture (and in general something feet) with their own hands, as a result some structural shortcomings are admitted. Not the most successful thing turned out, although it's not arguing about tastes.
Source materials:
- inexpensive countertops purchased for sale;
- remnants from the cabinet made of laminated chipboard;
- bars;
- a couple of remedy doors;
- Plumbing filling: washing, siphon, mixer and required pipes-fittings.
Table tops are composed of the letter "g", are connected by steel plates, the sidewalls are attached
Installation and replacement of the mixer in the kitchen is described here.
On the floor face down the countertops are unfolded. They are connected in the form of the letter "g" with the help of glue, which are promoted ends and steel strip with perforation, into which the self-tapping screws are spinning. The band, of course, is fixed below.
The sidewalls were supposed to be created (presumably laminate), because the remains available in the farm are the old door and a piece of the cabinet. They are fastened with the help of the corners, aligned along the edge of the tabletops. And this is the first mistake. And visually such a stand is hardly, and sitting uncomfortable. The sidewalls must be moved from the edge at least 10 cm.
After the sidewalls are installed, the end is turned over, put on a permanent place. All other works were performed in place. The hole was drunk under the sink, the plumbing part is installed and connected.
Article on the topic: Choose the best small bath
Front view and rear
Along the floor, the rails are nailed - along the walls and slightly retreating from the outer edge (5 cm retreat is made, it is possible 10 - more convenient), shelves are made. The cabinet from the sink side is closed by the door, the shelves left remained open. The space is partially decorated with wooden planks.
At first, they thought to put several different "increments" on the pipe, but semicircular edges remained from the worktops. It was decided to use them on the pipe. A panels for decorating balconies (bought in Lerua) are used as the outer finish of the couch. They almost approached the size, and the remaining gaps closed with a twisted cord. As a result, a homemade bar stand with a wardrobe for washing see the photo below.
Bar rack for kitchen with sink do it yourself
There are still comments on finishing. The first - cord will soon be soaked in various liquids, will have a pale appearance and strong "aroma". To push the time of the odor, it can be covered with something, at least the same PVA glue. Second - table tops just docked. Water will fall into the gap, a variety of fine garbage will be blocked. In the "docking" stage of the edge, it is necessary to wash the sealant (transparent, silicone, not acrylic). You can also need to process the edges of the cutout for the sink. Then the countertop will not swell. Countertops can be separated by furniture overlays, or similar to use and instead of a cord. Another budget option is plastic corners and the same T-shaped strips.
Bar rack for kitchen on wall residues
If the kitchen was combined with a balcony, a piece of wall remains. The place where there used to be a window. If there is no desire to destroy it, you can make a bar counter.
The remainder of the wall when combining the kitchen and the balcony can be turned into a bar
There are two options:
- At that height that is, put the worktop. It will be another work surface or shelf. Above it on pipes at an altitude of about 1.1-1.2 m to fasten another plane, which will actually be bar.
- Check / peel the wall to the desired height and put the worktop.
How can I make a rack on the wall residue
Both are not bad, but the one is in the photo on the right, more practical: two surfaces in the kitchen are always better than one. Please note that the size of the table top is greater than the width of the "legs". This is not by chance: so you can sit more or less comfortable, without turning sideways.
And if it's not too lazy to remove this wall, you can make something more comfortable - so that you can put the legs. Example - in the photo.
So sitting will be more convenient
Photo-ideas of registration
Separate corner
Desktop - as the basis
Stock Foto Bar racks on small kitchen
Option zoning
Interesting backlight
As the basis for the coffee table
On a spacious kitchen))
Bar Rack of Brick or Stone - Stylish
Non-standard appearance and color
Bar Stand in Studio Apartment
You can have dinner
Two sketches for incarnation
Bar rack for small kitchen
Video on the topic
If you want a bar rack to put in an open summer kitchen, the idea can be borrowed in this video. The guy from the Koragovy and Tolstoy Plank found in the forest built an interesting rack.
Most often questions arise about how to make a tabletop for a bar counter. You can separate it with a mosaic. And how - look in the video. In general, the laying technology of the mosaic is simple: on a special white glue with the subsequent grouting of the seams between the tiles. It is difficult to form an uneven edge. That's how to do it - look in the video.
Countertop glued from bars