After installing new doors, I was puzzled by a new question, how to make a slope of the entrance door? I agree with the opinion of specialists about that without slopes, the doorway looks sad and unfinished. I have been engaged in refining window openings and more than once, but everything was more difficult with the door, so I began to study the market and sort out the possible options that could be performed with your own hands. The way of finishing the slopes with the help of laminate I was interested immediately and then I will tell you how to properly make slopes for the entrance doors.
Finishing of slopes input door
On the characteristics of the material
Finishing of slopes input door laminate
Laminate has long established itself as an excellent flooring, it is used for both office space and residential buildings and apartments. It is easy to work with it, and a wide color palette allows you to embody various design ideas. I personally engaged in such panels in my house, but how to separate the door slope with the help of laminating hands, I remained unclear.
Finishing of slopes laminate
Laminate is a MDF sheet, which is covered with decorative layers. The final layer is a protective coating based on the resin. It should be known that the properties of the material directly depend on its type and quality. The popularity of laminate is caused by such advantages:
- Affordable price for the material allows you to ennorate both the floor and slopes, and other surfaces.
- An attractive view that is perfectly combined with other elements of the design of the room. In addition, it is possible to imitate wooden floors, which gives the accommodation
- There are different classes that talk about the strength and wear resistance of the laminate. A huge selection of colors and textures allows you to ennoble entrance doors with taste
- Installing the slopes of the entrance door will not take much time and effort, even a newcomer to fulfill all the work with your own hands.
- Good wear resistance. For a long time, it is not erased and not afraid of beats of moderate power
- Depending on the type is moisture-resistant, but still does not like a large amount of water
Important! The service life of slopes with proper use reaches 10-15 years, it is quite a long time, taking into account the resistance of the material to the external damage to the mechanical type.
Finishing laminate of slopes for the entrance door
Article on the topic: how to install the sink
Finishing of slopes
There are several ways to strip the slope for the entrance doors with laminate. Thanks to this, you can choose a more convenient option for yourself - it is very important when the installation is performed with your own hands. Installation methods are possible:
- With the help of glue, liquid nails or similar solutions are suitable. But before finishing the entrance doors it is necessary to align the surface. For these purposes, drywall or plaster
- Using the mounting foam is the easiest way that does not require maximum alignment. All flaws disappear when scaring foam
- A frame method is the most difficult option for the entrance doors, but at the same time, with it, you can remove the maximum smooth slopes without prior surface alignment. In addition, you can additionally put the heat insulating layer, which is sometimes necessary for the entrance door and maintain heat in the room
In addition, it can be attached as a vertical way and horizontal, it all depends on your preferences. Thanks to the enormous choice of colors, you can choose a laminate for any color of the doors, but it is better to think about the choice of monochromatic materials in advance, because unwitting in the color palette will significantly affect the appearance of the room, in general. If you want to beat the situation and make the entrance door of the same color, and the slopes of the other, then pick up contrasting shades and do not forget that too much contrast will speak more about your chamber than about design abilities.
Finishing process
Finishing laminate of slopes
Finish laminate
Before starting the installation with your own hands, regardless of which way you choose, you need to prepare the surface. I decided that I am absolceing with a gluing solution with a gluing solution. To do this, I decided to make slopes as smooth as possible. So:
- First of all, I swam the lumens, after which I put the layer of plaster. It is necessary to do it on a special grid. After a while, when the mixture is completely dried, it is necessary to project the slopes - this is an additional protection against dust in the openings.
- Now the most important stage begins to which it should be treated very seriously. At this stage, we make markup and crucify laminate. For the beginning of the lamella is cut to the upper part, then the sides are already displayed. For the cutting of the laminate, the electrolovka is suitable, if there is no such thing on hand, then use the hacksaw. Although I advise you to get this tool or temporarily borrow it from familiar.
- Since there was a mounting foam at hand, I decided that it was she who would serve as a glue makeup for mounting lamellae. Before reading glue, install the mounting spacers. They will play the role of borders and prevent the movement of the laminate. And in order to ensure that the level is more convenient to use the bar on each element on the sides. Use wooden material and glue it with glue.
- Before gluing the first lamella, attach it to the top slope and check that the entrance door does not cling it. Only after that the mounting foam is applied to the inner side of the material, you can also do with the surface to which it will be glued. By pressing the element to the surface, I fixed it with a painting ribbon - it keeps it to complete drying. Do not overdo the foam with applying, because it swells, and the excessive amount can shift the elements of the slope
- Thus, side sides are installed, taking into account markup in the assembled state. This will prevent the appearance of gaps in the places of the castle compound. Do not forget about the use of the construction level. With it, it is possible to understand whether there is too much foam, and whether the laminate has shifted because of her swelling
- When the slopes of the input doors are laid out and completely dry all elements, then you can proceed to the final process. At this stage, I cut off the excess repellent foam and attached these openings. Thus, protected them from negative external influence. But on this, the installation of slopes does not end, so that the appearance of the slope of the input doors was beautiful, glue the shock-inverted corner into the tone of the laid material. It will give the slope completed
Article on the topic: Fittings for the choice of plinth - what to pay attention to
Dexted trim for the front door with laminate
Now it became clear that the decoration of the entrance door is in this way this is not a difficult, but a long-lasting process that requires accuracy and attentiveness. Correctly picking up the color, making the correct markup and the cut of the lamels, you can not worry about that you can not work. The main thing is to work with good mood and confidence, then everything will succeed!