Who does not dream about living in a beautiful and cozy home. It is necessary to make repairs or yourself, or use the services of specialists in the field of repair and construction. If you take to analyze the advantages and disadvantages of all available materials and equipment for wall decoration, then this article is not enough, it means that you will have to stop only in one way. Let's talk about how the painting of the walls should be done correctly.
The kel protects the walls from fungi, microbes, also it is racks for fire.
Features of this option
This method is quite popular in our time, it is possible to compare its popularity with stacking wallpaper.
Painting components, as well as excellent properties of the disposal of microbes, fungi, resistance to the fire paint for finishing - all these advantages undoubtedly have a lot of weight when choosing a material during the upcoming repair in the apartment.
High security, the absence of harmful substances in the composition of ultra-modern paints make it possible to apply this tool under any repair conditions, in any apartment or room. After all, thanks to the calper, your walls in the room will not look wonderfully. But, first of all, you need to observe special nuances. About them and talk a little lower.
The paint is applied evenly along the wall with a roller or brush.
- First of all, it is worth talking that for a start you need to hold a number of preparatory work, because the walls without exception should be aligned, shaded, if necessary, it is necessary to break the wallpaper. Why do this stage can not be skidding? After all, from the quality of the preparatory work you spent will depend on all the repair. If you plan to make the glossy surface, the walls must be perfect at all.
- In the case when the walls are spitles, the painting must be carried out in stages in three layers. So, first applies the ground layer to the surface. If you decide to cover the walls with wallpaper, they are not necessarily primed. Remember that you need to paint necessarily only in special gloves, so buy them in advance.
- Previously will need to prepare paint. To this end, it will be necessary to pour carefully the water fluid into a special bucket (it should be clean, it is desirable that the product be plastic). With the help of a special mixer, you will need to stir paint, while adding a little water to it. Those. Painting consistency should be like milk.
- Then add how much the flaper is needed, so you will get the desired color. In fact, it is worth performing this task in this way: 100 mm of waterfront paint should be cast, add a kel there. Now this mixture and can achieve the desired saturation of color.
- A foam will be formed during stirring paint. You need to wait until it falls.
- The canoper on the walls must be applied using a special fur roller, its height of the pile should be within 16-18 mm.
- Constantly before pouring paint into a plastic bath, it must be mixed in the Beron itself so that the solution becomes homogeneous, and the paint pigmentation particles in no way have dated the bottom of the bucket.
- The rolling rolling should also be done correctly: it is necessary to impregnate it to paint and roll it over the remnants of wallpaper, pre-laid down on the floor.
Article on the topic: How to get rid of scale to the kettle with lemon?
Back to the category
Recommendations for work
Concrete wall staining circuit with roller.
How to paint the walls with a kelper right? You need to paint the wall first that it will not require the highest perfection of the quality of staining. Those., For example, the surface can be closed in the future furniture. Painting should begin with a brush from the corner. You need to apply a brush stripes about 3-5 cm on both sides of the corner. If this is a seat with a ceiling, then it will take a roller.
- It is necessary to apply paint to the paint, because the stripes must lean each other. Remember that the joints cannot match, so painting will also look bad, and it will be incorrectly applied. If you are staining the wallpaper, then the junction should not be at the shock of the wallpaper.
- When the walls are painted, it is worth leaving the surface for 5 hours for complete drying.
After the paint dries, you can continue to engage in the room. Today, there are a lot of ways to comfort your home, so choose the most suitable of them and embody your designer fantasies into life.
And so that there are no difficulties in the process, prepare in advance:
- empty tanks;
- brushes;
- roller;
- Mixer (drill).
And you can safely take care. If it is not even perfect, it will be a good experience in carrying out further work. Good luck!