Above the question, how to make a warm floor under the tile in the bathroom, almost everyone is conceived, who gets up after washing on an ice tile. This is especially true of apartment buildings, which are heated in the winter.
It is not so difficult to carry out that it seems, although it is pre-deciding to determine the specific choice, the most suitable and admissible for the bathroom of your apartment or at home.
Select option
Most often in the bathroom, electric or water warm floors
Before making a warm floor in the bathroom, you need to decide on the type most suitable for your room. We need to consider 2 different systems: electrical and water floors. Each of them has its advantages and disadvantages that are selected individually.
At the same time, the type of residential facility is taken into account if the apartment is heated with its boiler and is not eaten from the central source, you can use any of the well-known methods.
The house heated is centrally, when installing water floor, requires additional coordination with the relevant authorities that may not allow the installation of such systems.
This is primarily due to the fact that the boiler room is designed for a certain amount of consumers, and the installation of additional systems can lead to the fact that it will not be able to perform a full heating of the rest of the residential premises, so in this situation it is better to choose an electric floor.
Decide on what warm floor is better suitable for a particular room, professionals will help. They accurately fulfill the calculation regarding installation costs, the subsequent consumption of resources and the efficiency of the system.
Electric floors
Despite the fact that many are afraid to mount the electric warm floor in the bathroom due to possible damage to the current, it is not worth afraid of their application. The cable and the entire system are reliably hidden under a concrete tie and flooring, so can not happen direct contact.
Heating mats lay lighter than just cable
Article on the topic: Couple Couple do it yourself: drawings, instructions
IR film mounted very quickly
In recent years, laying infrared warm floor under the tile in the bathroom is obvious popularity. This is explained by the fact that for this you can not invite specialists.
Mounting can be done with your own hands. Moreover, if you use the so-called dry installation (it is noted with a special protective film), then it is allowed to lay a flooring that further facilitates the process.
It should be recalled that when independently laying electric warm floors in the bathroom, it is necessary to observe all precautions when working with electricity and make sure that the chain is de-energized and has no extraneous voltage.
Water Pol
For heat heating, pipes with a diameter of 15 or 21 mm are suitable
Article on the topic: Electric shutters with their own hands
Water warm floor in the bathroom is made of a small diameter pipe, as a rule, it is 15 or 21 mm. Preferably, plastic, copper or PVC products are used for this.
Installation is carried out in a specific sequence: or snake, or in parallel, the heating is performed due to the connection with the main heating system, the temperature is determined by the thermal sensor.
After laying, the system is tested and a concrete screed is poured, to which the tile or any other type of floor covering is fitted, suitable for this room.
The most preferred method can be called a tile laid on an aluminum material or a cardboard base. Such specificity guarantees the maximum heat transfer. For a wooden coating, it is recommended to make good ventilation of the room so that in the interval between water procedures it can completely dry. If this requirement is not respected, over a short time, the coating simply rotates. For more information about laying water floors, see this video in this video:
To make water floors in the bathroom, you will not need a lot of time and effort. In addition, the installation is relatively simple and safe. But, as mentioned earlier, for some situations, a number of additional agreements and confirmations from the competent authorities may be required. If this is not done, the randomly detected water heating system can lead to the imposition of large administrative fines and penalties.
Professionals engaged in such works recommended the system below the floor level of other premises. This is necessary so that when the leakage occurs, do not flood your home or neighbors.
Advantages and disadvantages
If you first consider the advantages that gives the heated floor in the bathroom, you can allocate a number of advantages. First, it is invisible, unlike radiators, the design does not occupy a place at all, which is very small in this room.
Secondly, after you take the shower, much more pleasant to go out on warm floors in the bathroom, than on an ice surface.
Article on the topic: How exactly fill the floor with concrete in the house or apartment yourself (video)
Thirdly, the water system connected to the main heating allows you to significantly save family tools, because it pays off quite quickly. Read more about the pros and cons of this kind of heating, see this video:
If there are advantages, it means you can find the disadvantages that these methods have, regardless of how they are used: as the main source of heating or secondary. It should be first emphasized that the cost of such systems will cost you in a good amount. But, as stated earlier, it pays off very quickly, so the effect you will feel when you first start.
Choose the finishing outdoor material will have to make a compatibility. Therefore, for this situation, the optimal option will be the installation of ceramic tiles or bulk sex.
Comparative analysis of two systems
If you plan to make a warm floor in the bathroom with your own hands, but could not independently determine what option is suitable better, you can use the table below, in which the main comparative characteristics of water and electrified heating systems are indicated.
Signs | Water floor | Matte floor | Cable system |
---|---|---|---|
Separate room | Need a boiler room, boiler | Not necessary | Not necessary |
Floor thickness with a screed, mm | 100-115 | 0.5-20. | 40-110 |
Mounting time, day | 3-4 | one | one |
Readiness for operation, day | 26. | Immediately | one |
Installation Method | Floor | Paul, ceiling, walls, any surface | Floor, installation on other surfaces is allowed, but with additional difficulties |
Reliability | Damage completely fails | If more than half damage, the remaining system continues to work | When damaged the cable completely fails |
Repair costs | High | Small | Large |
Service | Need to | Not necessary | Not necessary |
Freezing in winter | maybe | Impossible | Impossible |
Making warm floor to the bathroom, you should be guided by the purpose and features of the room. In addition, it should be pre-selected, a warm floor will be used as a primary or additional heating system.