Swan ya kasance koyaushe alama alama ce ta kyau, alheri da alheri. Yi swan na kwalabe na filastik tare da hannuwanku mai sauki ne. Dukda cewa wajibi ne a nuna abaciitionity, haƙuri kuma kuyi kadan lokaci, to kyakkyawan swan filastik zai zama babban abin ado ga lambun ko gida.
Wannan labarin zai gabatar da wata ƙungiya a kan shimfifa, dabaru guda biyu don ƙirar SWan tare da Haɗin Hakki an bayyana, waɗanda aka tallafa su da hotuna da bidiyo.
Ga wasu hotuna, yayin da SWan ya kamata kama:
Matsayi na kirkira
Da farko yana da mahimmanci don zaɓar wuri a cikin lambu ko a ɗakin da ake swan zai tsaya. Ana amfani da irin wannan asalin tsuntsayen a matsayin kwallon kafa na furanni ko wasu tsirrai. Sunan wannan sana'a shine swanƙasa na Kashpo. Mai ban sha'awa mai ban sha'awa da aiki.Dabarar farko
Don sana'a, za a buƙaci kayan kamar:
- Manyan kwalaben filastik guda biyar;
- 0.6 milmimeters na ƙarfe na ƙarfe;
- Gurin ƙarfe tsuntsu ne;
- Putty;
- Roller na putty;
- Farin bandeji na farin;
- Tassel.
Wajibi ne a yanke kwalban matsin lamba, kuma ka lullube waya kuma ka ba da lambobin guda biyu, yi rami a cikin bututun kwalban da liƙa waya. Arfafa zane tare da manne-iri na musamman, kuma ya zama karfi a cikin samfurin, ambaliyar da duwatsu ko tubalin da aka karye. Rami cika da rigar yashi.
Ta yaya yake aiki? A karkashin matsin yashi, kwalbar ya zama mafi zagaye kuma ku ɗauki siffar jikin tsuntsu.
Aikin aiki na aiki akan shimfiɗar shimfiɗar da cellophane. A mataki na gaba na aikin ya zama dole don yin bayani na Putty. Swean ya fi sauƙi ga ƙira, ana buƙatar mafita don yin kauri. Don yin ƙasan samfurin, farkon Layer na Putty yakamata ya shafa tsaye akan Cellophane.
Sanya kwalban a saman mafita da kuma neully spatuula zuwa magance yadudduka.
Mataki na farko akan taken: Crafts daga kullu na gishiri tare da hannayensu don yara tare da hotuna da bidiyo
Matsayi na gaba shine sanya wuyan tsuntsu. Don yin wannan, dole ne mu fara yaudarar waya tare da Putty. Farawa daga ƙasa kuma yi da rigar hannu.
Hakazalika, don yaudarar kwalban tare da spatula, wani lokacin farin ciki Layer na biyu santimita.
Don yin fikafikan tsuntsu, kuna buƙatar tanƙwara grid cikin siffar reshe, haša zuwa gefen kwalbar da karba, gyara pupty. Jira har sai mafita ya kama.
Lokacin da abin yaƙe ya kama, don yaudarar tsuntsu da mafita.
Yayin da fuka-fukan suna bushe, kuna buƙatar yaudarar tsuntsu.
A lokacin aiki, rigar rigar farin bandik.
Ana buƙatar samar da wutsiyar tsuntsu. Don yin wannan, ɓangare na grid don kawo a wani kusurwa na digiri 40 ka riƙe mafita. Sannan ka riƙe kanka ka bar ka bushe samfurin tsawon minti 30.
Daga kasan wutsiya don yin zagaye a ƙasan wutsiya.
Yi saman wutsiya a cikin matakai da yawa.
View of wutsiyar daga sama.
Duba gefen wutsiya.
Lokacin da girbi na Swan ya shirya don bushewa, kuna buƙatar ƙaddamar da shi, fenti fararen fenti da bincika.
Kyakkyawan Swan
Hanya ta biyu
Don kayan kwalliya, irin waɗannan kayan za a buƙaci:
- Kwallan fararen filastik kwalaben daidai 25 kuma kwalban guda ɗaya;
- Kwalban ruwa mai zurfi guda biyar;
- Biglleaya daga cikin gilashin da aka bayyane ɗaya na filastik, girma na lita biyar;
- M mita mai kauri;
- Mata na Mata na Mata;
- Sinypron da corks daga kwalabe;
- Leske da waya;
- Ƙananan pebbles;
- Jan masana'anta na berak;
- Scotch;
- Buttons na ido.
Da farko kuna buƙatar shirya kwalabe. Cire wuya, corks, zobba, tashi fitar da lakabi. Bayan haka kuna buƙatar yanke kwalaban, amma kafin yankan, zana layin sharetawa wanda kuka yanke.
Ya kamata ya zama cikakkun bayanai uku. Kusa da yin wuya. Don yin wannan, yanke wuya na kwalban 6 na iri daban daban, da mazugi na kwalban a kan kashi 8. Sannan kuna buƙatar baƙi don kai.
An yanke kwalban rabin lita, cire wuya da abin toshe kwalaba. Yin yankan ga kwalban kwalban. Na farko incision yi akan satin seam. Bayan haka, sanya wakoki, narke ƙarshen suttura da ƙwanƙwasa wani rami biyu na ramuka. Scotch da tattara biyu rabuwa na sutura. Torso swan ya yi da kwalban girkin 5.
Mataki na a kan taken: TAFIYA Kirsimeti - Hook Snowflake
Bayan haka kuna buƙatar tara samfurin. Lanƙwacin lokacin farin ciki a cikin sassa biyu kuma tsallake ta waya a cikin tsuntsu. A kai, sanya syntheps kuma fitar da matattara a madadin sassan 6-penal.
Wannan ya kamata ya zama wuya:
Don ƙarfafa jiki, kuna buƙatar tsallake da cervical waya ta ƙasa da kwalban ruwa guda biyar da fitarwa ta rami a cikin murfi. Don hana samfurin don cika kwalban duwatsu. Daga ƙarshen layin kamun kifi suna yin wutsiya. Yanke da kuma karfafa gashin tsuntsaye tare da zaren roba.
Crafts na Dandalin Majalisa ya shirya!
Bidiyo a kan batun
Bidiyo mai haske, yadda ake yin swanwa mai ban mamaki daga kwalabe.