Sau da yawa, farkon gyara alama alama ce ta cewa kuna buƙatar maye gurbin ƙofar shiga zuwa Apartance.
Zane zane na gyaran gyaran baƙin ƙarfe.
Bayan ya sayi sabon kwalin da kuma jagorantar kofofin daga ingantaccen mai samarwa, zaku iya ci gaba da rauni na tsufa.
Kayan aikin da ake buƙata
Kayan aikin da ake buƙata: matakin, guduma, cringpator da lebur mai siket, tef mai laushi, Bulgarian tare da diski akan ƙarfe.
Sauya ƙofar ƙofar zai buƙaci wasu kayan aiki. Tsakanin su:
- Hawa (Lomik);
- Malinary Scotch (idan babu fim mai kariya);
- Dowel-ƙusa (12 cm tsayi da 1 cm diamita);
- Rawar jiki (15 cm tsayi da 1 cm diamita);
- Ruwan ruwa.
- guduma;
- matakin;
- Majalisar kumfa;
- Mai sihiri;
- Huven ga karfe;
- Screwdriver;
- wedges na Spacer;
- Giciye da lebur mai lebur;
- Bulgaria tare da diski akan ƙarfe.
Kafin yin aiki da shi wajibi ne don kula da kariya - saka safofin hannu da tabarau mai kare.
Rushe Instlet
Shafi zane na ƙofar ƙofar a ƙarƙashin ɗakin silshabban na Semwircular da ƙofar kofar gida da kuma Plamband.
Kafin maye gurbin ƙofar ƙofar, zai ɗauka don tsoratar da tsohon. A lokaci guda, ya zama dole a cire butanni kawai, har ma da sauran abubuwan.
Tsarin yana da sauki sosai. Idan ana haɗe zane tare da ɗaukar kaya, to, a wannan yanayin ana amfani da hanyar. Da farko, ƙofar yana buɗe a kusurwar digiri 90. Idan babu kwarewa mai mahimmanci, wannan tsari ya fi kyau a motsa jiki. Daya a ƙasa ƙasa da kofa ta aika da lomik ko hawa kusa da gefen inda madauki suke. Abokinsa ya riƙe kansa ga mayafi har sai an iya cire shi, kuma ba ya tsalle daga cikin madaukai gaba ɗaya.
Idan an daidaita ƙofar tare da madaukai, to ya zama dole a cire su da sikirin ko sikirin daga yanar gizo ko akwatin da kanta. Haka abin da aka yi lokacin da surukan da za su yi gunaguni ko kuma ya canza su. Idan kayan aikin ba sa taimakawa, an yanke shi da grinder. Maimakon hawa, kowane kayan aiki, irin su sikelin sikirin, mai karfafa tare da goyan baya akan mashaya ya dace.
Mataki na kan batun: Gina bayan gida bayan gida: Ayyukan, zane-zane, masu girma dabam
Na gaba, rushe akwatin katako. Kafin wannan, filastar tana yin gwagwarmaya daga ɗakin. Idan an gano cewa an dawo da ƙofar daga gefen ɗakin, to, filastar ta yankakken filastar a wuraren da suke gangarawa.
Zane mai amfani da na'urar na'urar.
Idan ƙofar tana kan matakin ɗaya tare da bangon ciki, to bangon filastar suna fitowa har zuwa 15 cm bayyanann daga gefen buɗe. Idan akwatin a lokaci daya aka buga, an yanke kumfa a gefenta.
Bayan haka, tare da taimakon wuka, an tattara ɗayan racks kuma cire kusa da dutsen. Bayan an raba sashin na sama da sauran rack gefe ya rushe. Sannan cire babba da ƙananan crossebs da ƙofofin. A hankali cire sauran matakan rack. Duk abubuwan amfani da kayan kwalliya - squing-slping na kai, ancing da ƙusoshin - shimfiɗa kuma juya a gaba. Idan matsaloli suka taso, suna da sauƙin warware, suna amfani da niƙa ko hacksaw don wannan dalili. Idan sassan karfe sun kasance, to suna da sauƙin ci a cikin bango. Tsohon StucCo a lokacin aiki zai zama. Ya kamata a tsabtace, ya 'yantar da kewayon buɗewa.
A cikin taron cewa an sanya kofofin a kan akwatin da aka yi da ƙarfe, to aikin ba zai zama da sauƙi ba. Wataƙila ta aminta da ita, amfani da walda don wannan dalili. Sabili da haka, za a buƙaci aikin ta Bulgaria, wanda zai yanke shawarar da aka ƙayyade.
An ba da rahoton buɗe a ƙarshen aikin daga cikin datti da aka haifar: mafita, yanki na tsohon filastar. Yana yiwuwa zai dauki guduma don wannan.
Bayan ya gama tsoratar, an shigar da ƙofar ƙofar. An rarrabu cikin shigarwa na akwatin kuma ƙofar kanta.
Akwai rigakafin guda 2 dangane da adadin sigogi:
- matakin shigarwa na sabon akwatin dangi da hanya;
- Matsayi dacewa: Asibiti, Gidan.
Nau'ikan ƙofofin.
Shigowar kanta ana aiwatar da godiya ga kuliyoyi na goge-goge da yanke a wani kwana. Suna rufe a tsakanin akwatin kanta da bango ko bene (ko rufin). Ana samun wedges daga tsohuwar akwatin! Yana da matukar muhimmanci cewa izinin fasaha ya zama iri ɗaya daga dukkan bangarorin.
Mataki na farko akan taken: bututun bututu na masu magana da gas da fasalin shaye shaye na gas
An gudanar da Saka don haka matakin akan "Spike" ya nuna "sararin samaniya". Ana amfani da shi a cikin birgima tare da madaukai a garesu. Don ƙofar da aka yi da ƙarfe, matakin magnetic ya dace sosai. Tsawonsa shine 400-800 mm. A lokaci guda, ƙaramin matakin tsayi zai ba da kuskure, ƙarin - nunin Nuni na Attonontal zai tashi. Tabbas, a cikin gidaje, nisa na kofofin gargajiya sune 900 mm.
Tasirin yakamata ya tsaya sosai a tsaye. Kowannensu ya sanya kagara 2-3.
Eterayyade ɓoyayyen da ake so da kuma rataya, akwatin a hankali an daidaita shi a hankali akan farantin mai hawa a saman madauki.
Lambar zaɓin zaɓi 1: fasali
Shigarwa ya kasance tauri na ƙofar ƙofar a ƙarƙashin Plattand.
An kammala zaɓin shigarwa ta hanyar shigarwa a cikin faranti. Yawancin lokaci, guda 3 an shigar da su tare da tsawon rakunan gefen.
Ana amfani da ɗakin da aka yi a bangon buɗewar. Saboda haka, ƙofar a ciki ana saita ja da bango.
Bugu da ari, mai karfafa gwiwa ko sanda daga karfe, wanda diamita shine 12-16 mm, Clog ta cikin ramuka a cikin farantin. Bayan haka, a gaban injin walding, ana welded zuwa gare shi ko bude, in ba haka ba accts an shigar dashi. Bugu da kari, suna sauƙaƙa sauƙaƙe shigarwa da kuma murƙushe akwatin. Hakanan amfani da nils-kusoshi. A gare su, ramuka ramuka a bango ta amfani da injin.
A wannan hanyar, tabbacin 1-2 ne 1-2 cm tsakanin bango da gefuna. Ana amfani da wannan zaɓi na hawa. Koyaya, idan kauri katangar ya bada izinin, ana iya amfani dashi a cikin gidan.
Lambar Zabi mai lamba 2: Shawarwarin
Ana amfani da zaɓi lokacin da zai yiwu a nutsar da ƙofar a buɗe. Kofofin a wannan yanayin suna nesa da gefen bude, kuma faranti ba zai taimaka ba. Ana amfani da wannan zaɓi idan bangon yana da dacewa da kauri daga 150 mm. Idan karami ne a cikin girman, maharan zasu iya kwace ta.
An kafa ƙawancen anga cikin ramuka da aka yi a ciki.
Makircin amfani da slatedcol m multencil don rajistar ƙofar shiga.
Mataki na a kan taken: Murmushin Karfe a kan Windows: jinsuna da manufarsu
Bayan kammala scoring, suna sa matosai fentin karkashin launi akwatin da aka shigar.
Idan akwatin ba tare da ramuka da suka gama ba, to, sun bushe. Bayan haka, an daidaita shi da sanduna na karfe, wanda ke rufe cikin bango ta rami a akwatin. Gaba kuma, godiya ga tsarin waldi, an kama su daga ciki. Don aiwatar da wannan tsari, akwai rata 0.5-1.5 cm tsakanin akwatin da budewa a garesu.
Shigarwa wani lokacin hada duka hanyar da ke sama. Ana amfani da takalmin ƙarfe da sandunan ƙarfe a wannan yanayin tare da tsawon 10 cm da kauri daga 1-1.5 cm. Ana amfani da bolts don hawa akwatin da aka yi da itace.
Kai tsaye ƙofar shigarwa ga Apartment
Fitar da gidan yanar gizo ana aiwatar da shi ne kafin shigarwa akwatin a cikin buɗewa. Shigarwa na wannan iri ɗaya ne ga kofofin daga wani abu daban. Ana aiwatar da hanyar kofar ƙofa a gefen rakumi tare da hinges. Don yin wannan, yi amfani da bututun ƙarfe ko, azaman zaɓi, matakin gini.
Bayan haka, ramuka sun bushe ta hanyar faranti. A saboda wannan, ana amfani da injin ko rawar soja. Girman irin wannan ramuka shine 1.5 cm, kuma zurfin budewar ya bambanta a cikin kewayon 10-12 cm. Duk sun sake bincika matakin. Wajibi ne a tabbatar cewa akwatin bai shiga yayin aiwatar da hako ba. Bayan haka, ƙirar suna walda ko gyarawa.
Ana sanya madaukai ƙofa tare da man injin kuma ana saka kwallayen kwallaye a cikin su idan ƙirar su ta bayar. Bayan rataye daga waje, wani ɓangare na mai tsami an cire shi a hankali. Rufe ƙofar tare da ingantaccen dacewa.
Bayan haka, daga katangar, an daidaita ragin. A wannan yanayin, dole ne a sanya rata guda ɗaya da ƙofar kofa 2-4. Sannan a qaddara ta hanyar kusoshi.
A lokaci guda, kuna buƙatar tabbatar da cewa abin da aka haɗe na ƙarshe shine ƙofar na iya motsawa ba tare da ƙoƙari ba, kuma na'urorin suna aiki yadda yakamata. Lokacin amfani da wannan umarnin, wanda zai maye gurbin ƙofar ƙofar zai zama mai sauri da inganci.