Ukunyuka kukhokelela ekhitshini ekhitshini ngezandla zakho

Elinye lawona manqaku abaluleke kakhulu ngokulungisa okanye ukwakhiwa kukhetho olufanelekileyo. Lo mzuzu unxulumene naliphi na igumbi endlwini, yiba ligumbi lokuhlala, igumbi lokulala, igumbi lokuhlambela okanye ikhitshi. Kutshanje kutshanje nje kukusetyenziswa kokukhanya okukhokelwayo, kuya kwanelisa kakuhle iimfuno zomntu ngamnye. Ikhitshi elingasemva le-LED kunye nezandla zabo linokwenzeka kwaye lingenakuthelekiswa nanto ilula, akukho sidingo sokwazi izinto ezithile. Eyona nto iphambili yokwenza iprojekthi kwaye ubale.

Umzobo woqhagamshelo RGB-Khokele.

Uqhuba njani umsebenzi?

I-LED i-semiconductor ekraleni xa idlula kuyo amandla ombane kuyo. Ukufumana ukuqaqamba okufunekayo, kuya kufuneka uwazi ubume bemichiza yezinto ngokwalo. Ngokukhawuleza ithi ii-LEDs aziqhagamshelwanga kumthombo wamandla, ukusukela kwityala liza kwenzeka ngaphezulu, okukhokelela ekuqhekekeni. Ukwenzela ukunqanda oku, i-stabilizer isetyenziswa, eyi-Tok Stain.

Kwimibala banokuba nawo nawuphi na ithoni. Kodwa ukuba unqwenela, unokwenza i-infrared okanye i-ultraviolet i-overlight ekhitshini.

I-LEDS ayisiyo isibane esikhulu, badlala indima yokuqaqambisa. Ke ngoko, zisetyenziselwa ukomeleza izibane eziphathwayo okanye izibane zentloko ngemoto.

Uhlobo oluqhelekileyo lokuphunyezwa kwe-LED.

Ukwenzela ukuhlengahlengisa ikhitshi ikhitshi ngezandla zabo, ungasebenzisa iRibbon ye-LED. Iya kongeza ubuhle obuthile kwaye iya kunceda i-Accents. Ezona zinto zibalulekileyo zinezibonelelo zayo:

• Ekuqaleni ekhitshini kuya kuhlala kukhanya ngokwaneleyo ukupheka;
• Ungoyiki ukonakala koomatshini;
• Ukuba ngenye imini imibane iya kusebenza iiyure ezili-16, iya kuhlala ingaphezulu kweminyaka eli-15;
• Akukho ngxaki kukhetho lwezibane zemibala;
• Kunika ukukhanya kokukhanya, kuba akukho sidingo sokufudumeza;
• Ukuba kukho imfuneko, kulula ukukhetha i-angle oyifunayo yemitha;
• Ukucima umlilo, ngokufakwa kwawo akukho sidingo sokwenza izikhombisi zobubumo kubume kwikhitshi ekhitshini;
• Ngexesha lokusebenza akukho ukukhululwa kwezinto eziyityhefu, ezibenza bakhuseleke kule ndawo.

Inqaku ngesihloko: Yeyiphi iglu kungcono ukugcoba i-ceiliry tile

I-smdbons zilungele ukufakelwa kwikhitshi. Abatshatanga - babini-ezintathu kunye ne-troure. Kuxhomekeka kwicandelo, i-monochrome kunye nebala elipheleleyo. Ubungakanani buhlukanisa ukusuka kwi-1.6x0.8 mm ukuya kwi-5x5 mm.

Zithini iindidi ze-LED?

Uthotho oludumileyo lweembambo ze-LED.

Uninzi luye lwalubona lolo lulo njengeteyiphu ye-LED kwiimpawu zeVenkile. Ke, le yiteyiphu ye-led. Ngomyalelo omnye, i-LEDS encinci ibekwe. Ubume betheyipu bulunge kakhulu ukufakelwa ngezandla zakho.

Zininzi iindidi zeeribhoni, kuxhomekeka kuxinzelelo lwendawo yezibane nge-SQ. M: 60,120 kunye nama-240 amaqhekeza nama-240. Ngokuhambelana, kunabo, ukuqaqamba kuya kuba kukhiya ekhitshini. Kwakhona, iintlobo zokukhuselwa kuMswakama kufuneka zabelwe:

1. I-IP 20 -ukuzikhusela. Ezo zinto ze-LED yenziwa ngamagumbi aphilayo okanye amagumbi okulala, kuba kukho inqanaba lokufuma kwisalathiso esifanelekileyo.
2. I-IP 65 - Ukukhusela okuphakathi. Olu hlobo sele lungafakwanga kuphela ekhitshini, kodwa nakwigumbi lokuhlambela.
3. I-IP 68 -Khuseleko oluhle. Olu hlobo lunokubangelwa kukukhanyisa ngokweengcali, njengoko kusetyenziswa ikakhulu kuyilo loyilo lobume bemeko, umzekelo, kwimithombo okanye echibini.

Phambi kokuthenga izinto, kubalulekile ukumisela indawo yokukhanya.

Umahluko uqhagamshelo olufanayo.

Ukuba ngumphezulu wokusebenza, kungcono ukukhetha uphawu olunamandla ngakumbi, kwaye ukuba ezi zitshixo, kwaye ii-LCS ziyenza indima yokuhombisa, ungayenza ngeeribhoni eziphantsi. I-Ofisi enye ye-LED inokusetyenziswa kwisilingi, ukwenzela ukuba ikhitshi kwindawo yokusebenza kunye nendawo yokutyela.

Njengoko kuchaziwe apha ngasentla, ubukhulu obukhanyiso buxhomekeke kwinani leekristali. Ukongeza, le parameter ichaphazela utshintsho lombala. Ukukhetha i-tepi, kuya kufuneka unake kwileyibheli yayo. Kukho ukubakho kwendibaniselwano yeitephu ezahlukeneyo, eziya kuthi zenze imithunzi yezigidi ezili-15.

Izinto ezinjalo zithengiswa kwi-roll, ubude bawo buziimitha ezi-5. Kodwa ngaphandle kweteyiphu ngokwayo, ukuhambisa amandla kunye nezinto ezikhethiweyo kufuneka zithengwe ngokwahlukeneyo.

Inqaku lesihloko: Amaphepha omhlaba ase-bamboo: Ifoto kwi-Intermari, iphepha Wall Plathi

Ungayenza njani ikhitshi le-LED yokukhokelela?

Ukuze ube nokukhanya okwaneleyo kwiimfuno zobuqu ekhitshini, i-LEFA LE-LED yokukhutshelwa ikhutshelwe kwiindawo ezininzi:

Unxibelelwano lweefowuni ze-LED usebenzisa izihlanganisi zeNavigator.

1. Ngoncedo lwayo, unokucwangcisa iishelfu zeglasi, ii-eves, iikhabhathi kunye neefestile zeglasi yeglasi. Kwaye iya kuvula, kamsinya nje emva kokuba iingcango zivulekile, kwaye xa zivaliwe, kwaye ayizukusebenza.
2. Itheyibhile yokukhanyisa i-tops njengomphezulu ophambili wokusebenza.
3. Ukuba isibane se-LED sifakwe kumazantsi entloko yekhitshini yekhitshi, iya kwenza isiphumo sokuqeshwa kwefanitshala.
4. Ukuba indawo yokuhamba kwamanqanaba amaninzi yenziwa ekhitshini, emva koko ngalinye lamanqanaba okanye umntu kuphela anokukhanyiselwa.
5. Ngoncedo lokwanda kwe-LED, kunokwenzeka ukwahlula igumbi kwindawo yemimandla esebenzisa ubukhulu kunye nezisombululo zemibala.
6. Ukuba ifunwa, isibane esingasemva sinokubekwa emnyango igqabi, nakwikhitshi lasekhitshini, ukuba likhona.
7. Isibane esingasemva sinokusikwa kwizinto ezingasentla, ezinjengeefoto okanye imifanekiso.
8. Ukuba itafile ephezulu yenziwe ngeglasi, ke inokuhonjiswa ngenqaku lenqaku.

Abayili bayacebisa besebenzisa imibala efudumeleyo ukwenza ukukhanya kweklasi, ngokulandelelana, ukuba ufuna isitayela sanamhlanje, emva koko iitoni ezibandayo ziyasetyenziswa.

Ungayifumana njani ilitye ekhitshini ekhitshini ngezandla zakho?

Iskimu sezindlu zesibane.

Nokuba yeyiphi na inketho ekhanyayo ekhethiweyo, eyona nto iphambili kukukhumbula ukuba i-LART ye-LE-LED ye-LED kufuneka ibonelele ngesixa esifunekayo sendawo ekhethiweyo.

Ngaphambi kokuba uqale ukufaka, kuya kufuneka isitokhwe:

• Iimbombo ze-LED ngamandla e-12 w;
• Intambo yombane (i-Deameter 0.75 mm²);
• iifolokhwe;
• iibakaki zombane zombane;
• Ukurhweba intsimbi;
• abaguquli;
• I-Bilatech Scotch;
• ikhasethi;
• Iiprofayili ze-LED;
• isikere;
• I-12 Windouse;
• Iikona eziphantsi kokuqaqambisa.

Ukufaka iteyiphu ye-LED ngolu hlobo lulandelayo:

1. Okokuqala, umphezulu wokusebenza kufuneka ulungiselele, oko kukuthi, ihlanjululwe kwaye inyukele.
2. Iteyiphu ilinganiswa ngamacandelo afunekayo, emva koko anqunyulweyo. Ukusuka kwimiphetho kuyimfuneko ukuze unxibelelane nabafowunelwa (i-1-1.5 cm). Emva koko, iibhanti ezimbini zentambo zithengiswa. Bonke abafowunelwa kufuneka bakhuselwe ngokufakwa.
3. Kwizikona kwi-tepi yesandla enye, kwelinye - iribbon ye-LED. Kufutshane nenguqu ngokwayo ifakwe kufutshane. Kodwa ngaphambi kokuba ifakiwe, kuyimfuneko ukususa umzimba wayo ukumisela i-voltage esezantsi, ukusukela kweli cala unxibelelwano olukhanyisiweyo luthengisiwe. Ukusuka kwelinye icala, i-electrocable kunye ne-fork iqhotyoshelwe kuyo.
4. Ibhokisi yeplastiki ibekwe ngaphakathi kwiKhabhinethi, ekuyimfuneko ukukhusela iingcingo ezongezelelweyo ukuze zingaphazamisi. Ngenxa yoku, kukho ubungakanani obufunekayo bomngxunya apho iingcingo zoluliwe kwaye zibotshwe ziibakaki. Kufuneka baqhagamshele kwindawo enye apho umbane uyakubekwa khona. Ngendlela, ngokubhekisele kunxibelelwano lweengcingo. Eyona nto iphambili kukukhumbula ukuba i-dibanisa kufuneka isondele kona, kwaye i-thabatha, ngokulandelelana, ukuya kuthi ga. Emva koko, baqhagamshelwe kwibhloko.
5. Inyathelo lokugqibela kukufakelwa kotshintsho kunye nokudibanisa kuyo yonke ibhloko efanayo.

Inqaku lesihloko: Ungayixhobisela njani i-cottage

Iingcebiso ezisebenzayo

Umzobo we-Elektric yeZibane zokuQhagamshela.

Kukho iingcebiso ezininzi ekufuneka uyazi ukuseta isibane sasekhitshini ekhitshini ngezandla zakho:

1. Ukuthenga iteyiphu ye-LED, ukhetho oluchanekileyo luyakwenza oku kwivenkile efanelekileyo. Ukongeza, ingqalelo ibhetele ukuhlawula imveliso ephakathi. Baza kutsha ngokuqaqamba kwaye abagqithi.
2. Ukwenzela ukuba isibane se-LED sisebenze, sigcine umkhondo wokufakwa kweengcingo zeengcingo, ukukhanya akuyi kusebenza ngendlela eyahlukileyo.
3. Ngamaphepha okukhutshelwa "+" kwaye "-", kwinkqubo yokusika izithuba, baya kunceda ukuba bahambe. Oku kusithiwa lunohlobo lomgca othe nkqo, okoko kufanelekile ukuba wenze i-vemos.
4. Kwinqanaba lokuthenga, inqaku eliphambili kukunyulwa ngokuchanekileyo kwenqanaba lamandla kunye neteyiphu ye-LED. Kwimeko echaseneyo, le yunithi ayisebenzi ixesha elide.
5. Uninzi lusebenzisa izinxibelelanisi zengcinezelo ezibolayo, kodwa kungcono ukusebenzisa isinyithi esingumthengisi njengesiqhelo.
6. Ngokuthengiswa, kuyacetyiswa ukuba isebenzise iRosin;
7. Ukuba kukho umnqweno wokuhlengahlengisa ubukhulu bokukhanya, i-dimmer kunye ne-Amplifis ziyafuneka. Zifakwe kumthombo wamandla.
8. Ukuze ukukhanya kudinwe ngokukhawuleza, kungcono ukudibanisa imibala eyahlukeneyo.

Ngokubanzi, njengoko kucacile kokungaphambili, ukuseka ikhitshi kunye nezandla zabo ukuba izinto ezibonakalayo ze-LED aziyi kusebenza.