I-sweat ye sweate ye sweate enemizobo kunye neenkcazo zabaqalayo ngevidiyo

Olu da lweklasi ye-Master malunga nendlela yokubopha i-sweatshi yendoda kunye nezikimu.

Iimodeli ze sweatshi ezingamadoda zininzi kakhulu - "ngomqala", i-purlovers ngeepateni ezahlukeneyo kunye nemilo yokusikwa, kunye nomthungi wenqwelomoya. Ngokuphunyezwa, i-sweatshi yamadoda yahlukile kwi-veting egudileyo ye-FOOFT (akukho litting) kunye nemikhono emide. Ukongeza, uninzi lwamadoda aluvayo lusikiwe ngakumbi kunabafazi, njengoko behlala bebeka ngaphezulu kwehempe kunye nezinye iimpahla.

Ungayibopha njani i-sweatshi yamadoda eneenaliti ezinamava emizekelo yeemodeli ezahlukeneyo ngeendlela ezahlukeneyo zokuxhuma.

Inyathelo lenyathelo lenyathelo

Is sweatshi efudumeleyo efudumeleyo "kwikhola ephezulu" phantsi komqala ", mhlawumbi, unawo wonke umntu. Le modeli yasebusika ilula ayikabikho kwifashoni ixesha elide.

Is sweatshi enjalo inokunxulumana nabo: Ukutyibilikwa kulula kwaye kuyaqondakala kwaye kunokuba ngamava okuqala omsebenzi oqeqeshiweyo.

Izinto eziyimfuneko:

• I-Yarn - i-100% yoboya, i-120 m / 50 g yeeklabhu eziluhlaza okanye ezimnyama (16-20);
• Inombolo ye-3 ne-3.5;
• Inombolo yeSetyhula 3;
• inale yentswela-zincwadi;
• Inaliti yendibano.

I-PAMPIT YOKUGQIBELA I-10 CM:

• ngokuba nenombolo ye-3.5 - 22 lops kwimigca engama-30;
• Ngokuba nenombolo ye-3 - 23 loops kwimigca engama-30.

Ubungakanani: 46-48 (50-52).

Ukongezwa kunye nokukhula kweelogo kutsho kohlobo "1 × 2x4", igama eli-2 kumqolo ngamnye we-4 ".

Inkqubela phambili:

1. Siqala ukugoba ngasemva: Sibamba i-hinges kwi-110 (120) kwi-3, siphawula ukuqala kommakisi kunye ne-6-cenumeter Gum 2-2;

1. I-46-48, yongeza ngokucacileyo iilogo ezi-2 kumqolo wokugqibela weGum (112 loops);

1. Yiya kwizinaliti ezinama-3.5 kunye ne-4 cm ngolu hlobo lulandelayo: 12 (11) ngebhendi yerabha ye-2 × 2, i-88 (11) ye-12 (11) ye-12 (11) yebhendi yerabha;

1. Senza ukuphuma kwayo kumacala omabini - 1 × 2x4 kunye ne-11 × 2x6 (6 × 2x4);

1. Ukuqhagamshelwa kwi-67 (68) cm ukusuka kumda wokuqala, obekiweyo, vala i-hinges 16 (18) ye-hinges yentamo kwaye uphelise icala ngalinye ngokwahlukeneyo;

1. Sinciphisa i-2 × 6x2, kwaye emva kwe-69 (70) cm yewebhu ivale iilogo ezishiyekileyo kumacala omabini;

1. Iwele phambi komva, kodwa ngentambo emanzini enzulu;

1. Ukunxibelelanisa i-56 (57) cm isondele kwi-12 (14) loops embindinisweni nasekupheleni icala ngalinye ngokwahlukeneyo;

1. Sivale 1 × 3x2, 2 × 2x2, 2 × 1x2, 3 × 1x4, 2x6;

1. Ukunxibelelanisa i-69 (70) cm, phulaphula i-loops eseleyo kwicala ngalinye;

1. Siqala ukuqalisa imikhono ye-KNGNT: Inqaku lama-58 (62) ii-lops kwizinaliti ze-3 kunye ne-3 kwaye i-gum 6 cm;

1. Senza ukunyuka kwe-7 × 1x8, 13 × 1x6 (7 × 1x8, 13 × 1x6);

1. Ukunxibelelanisa i-47 cm, kwi-Seam yenqwelomoya, sivala iilogo ezi-2 kube kanye (kuphela kwi-46-48 ye-SISS);

1. Senza ukuncitshiswa kwe-6 × 4x6 (5 × 4x6) kunye ne-3 × 4x4 (5 × 4x4), kwaye emva kwe-3 ye-Loops, emva kwe-Loops ezisi-7, ngokulandelelana;

1. Senza ikhuselo lokugqibela (14 lops kufuneka lihlale) kwaye sivala zonke iilogo;

1. Senza umgibe wegxalaba;

1. Senza ikhola: Kwisithethi esijikelezileyo ecaleni kwe-School Stop 136 (i-140) leops ubuso bokuqala, kwaye emva koko irabha emva kwe-21 cm;

1. Sigubungela imikhono, sithumele imigingo esecaleni.

Inqaku ngesihloko: Yeyiphi ilaphu le-poltester kwaye yintoni umahluko ovela kwezinye izicubu

Iskimu njengecebo:

Le modeli yipullover yaseIreland-ivavanye ukusuka phezulu, ukuqala kwikhola, kwaye yahlulwe ngamagxa aprintwayo, eyokuvumela ukuba uphephe umthungo.

Kuya kufuneka unxibelelane nemodeli enjalo, eyona nto iphambili kukujongana nokuqala kwendlela yokuqhawula, oko kukuthi, ngekhola namagxa.

Izixhobo ezifunekayo kunye nezixhobo:

• I-Yarn 100% yoboya (i-120 m / 50 g) - 16-20;
• Ukuqhekeza i-STEDS (3 no-3.5);
• Izithethi ezijikelezileyo (3 ne-3.5);
• Iinaliti ezongeziweyo zeepateni zokuThubela (i-COS).

Ukuxinana: Ii-leops ezingama-22 ngemigca engama-30 yesampulu ye-10 × 10 cm. Ubungakanani 50-52 (54-56).

Kulungele ukwenza izinto ezisebenzayo kwinkqubo yokulungisa-oku kuya kukuvumela ukuba wenze iswitshi ngokwemifanekiso, ithathela ingqalelo zonke iimpawu.

Inkcazo ngokubanzi yomsebenzi:

1. Ikhola, thayipha inani elifunekayo lemilo kwiinaliti zekhola (ngokungqinelana nentamo kunye nesampulu yesampulu) kunye ne-1 × 2 okanye 2 × 1 2 (ngaphezulu).

1. Ukuze imitya ebanzi, i-lops yahlulwe ngokulinganayo kwaye i-nittitting iyaqhubeka kumacala amabini. Imagxa "emxinile", iyimfuneko ukubala inani elifunayo lelogo ukusuka kumacala amabini, kwaye i-leps eshiyekileyo iqhubela kwiPIN.

1. Amagxa e-Knit enepatheni (umzekelo, ii-braids) kubude obufunayo. Iilogo ezigqithileyo zihlala zivulekile (zitshintshelwe kwiPIN).

1. Ukudlulisela iilogo kwimiphetho "yokulandela" kunye nokuhlala (ukuba ikhona) i-hinges kwizikhonkwane kunye nokuthathela ingqalelo ukwanda kwesifuba kunye nemikhono. Xa iziza zemikhono zidluliselwe (unokufunda ngokufanelekileyo), ukunqunyulwa kuyatshintshelwa kwiintsana ezijikelezileyo kwaye zilungele isangqa.

Ngaphambi kwaye umqolo unokunxulunyaniswa ngokwahlukeneyo, emva koko uthumele kwimiphetho yemithombo yamagxa. Ukwenza oku, i-116 (124) i-lops iyaqeshwa, i-gum ye-1 × 1 iyanyibilika, emva koko iphambili kwi-pullover (i-pullover okanye ihayo okanye iipateni). Kwi-beeps, i-loop enye yongezwa kumacala amabini kumqolo ngamnye olandelayo. Kwizityalo (ukuphakama kwemveliso i-43 cm) kuvaliwe kube kanye kumacala omabini amacala ama-6 iilogo, emva koko ama-24 (27) amaxesha. Emva kwe-59 (61), ikufutshane yonke loo nto.

Inqaku lesihloko: I-CODCHECHECHECH COCHET YABASEBENZISI ZABASEBENZI: I-Master Cols kunye nevidiyo kunye nefoto

1. Kumkhono kwisetyhula okanye inaliti yokuma, okuseleyo akukho manyala avaliweyo yemithombo yamagxa adluliselwa. Okulandelayo, la macala mabini aqeshwa hinges ezindongeni zokudluliselwa nasemva.

1. Imikhono egquma kwisangqa ukuya kwi-cuff (inokonyuka okanye incitshisiwe ezandleni zezandla);

1. I-cuff kunye nemiphetho yesiphatho kunye ne-bit ye-back enebhendi yerabha ye-1 × 1 okanye 2 × 2.

Ezinye iimodeli zinokutyikitya ukusuka phezulu ukuya ezantsi, kodwa koku kufuneka uqiniseke inqwelomoya ivela phezulu, i.e. I-seam ephezulu yokuqhagamshela imikhono, ngaphambili nangasemva. Ngamanye amaxesha yeyona nto yobunzima inxenye i-swetting ye sweatshi.

Ukuze uqonde ukuba ungayinquma njani i-seam elawulwayo ukusuka phezulu, ungazama ukunxibelelanisa isampulu (ungazisi kude kube sekupheleni). Ukwenza oku, uya kudinga:

• Ukwaphula okanye ukutshixeka iinaliti (2.5 okanye 3 mm);
• umsonto;
• Izithethi ezongeziweyo okanye izikhonkwane.

Inkqubela phambili:

1. Siqesha i-lops ye-112 kunye ne-nyosi 4 cm gum 1 × 1;

1. Sisasaza iilogo: ngasemva nangasemva kwe-40 yeelogo, kwimikhono-kwiilogo ezili-14, iilogo ezi-14, iilogo ezi-4 ezisele zine-Seam yenqwelomoya (i-nit kunye ne-Nakud);

1. I-Knit kwisangqa: Ii-leps ezigudileyo, i-Nakid, i-LOOP yobuso, i-Nads, i-Navid, i-Nakid, i-Toop, i-1 cm);

1. Siphethe ii-lops zemikhono kwi-PIN okanye inaliti nganye, dlulisela umva umva kwinaliti kwaye ufake inxenye yokudluliselwa kunye nokubuyela umva;

1. Imikhono yesangqa kunye neenaliti ezichumayo.

Ukuba uyaqhubeka nokutyibilika, uya kufumana is sweatshi epheleleyo egcweleyo kunye ne-seam yenqwelomoya.

Ividiyo kwisihloko

Ukukhetha ividiyo yeeklasi ze-GORT, Ungayifumana njani iSweater yamadoda.