Imigaqo yokufakelwa kunye nokufakwa kweRibbn ye-LED yenze ngokwakho

Ukukhanya okukhethileyo ngokufanelekileyo kwenza ukuba i-internar entle nangakumbi. Kananjalo, ukukhanya kuchaphazela i-MALEMS yomntu: ayifanelanga ikhanye kwaye ayibi rhabaxa, yiya kwiindawo ezifanelekileyo (ukuba iza eflethini).

Umthombo wokukhanya ayisiyisibane esikhanyayo kuphela kwi-chandelier okanye emphethweni. Isongezelelo okanye ukutshintshwa ngokupheleleyo kwendlela ethi "Umgangatho" wamakhadi e-LED (iitephu ze-LED, DEDURE). Ngoncedo lwabo, unokwenza i-inzuzo yangaphakathi okanye ibalaselisa icebo apho isibane asinakufakwa khona. Ukunyusa iRibbon kwenza ngokwakho ngokwenene: Umsebenzi ulula.

Izibonelelo kunye nokungalungi kweRibbons ze-LED

IIMPENDULO ZOBUCHULE:

• Ukusetyenziswa kwamandla asezantsi (ii-LED ezisebenzisa amaxesha ama-5-6 umbane ongaphantsi kunezibane ze-incandescent ezinamandla alinganayo);
• Ukufakwa okukhawulezayo (iiteyiphu zinesiseko esinamathela ngasemva);
• ukukwazi ukusika i-tepe kubude obufunayo;
• amandla okubamba iteyiphu nangayiphi na indlela;
• Iskimu senkqubo yombala obanzi (isibane esingasemva asisiyo kuphela umthunzi ophuzi, kodwa nomnye umbala, kwaye nemibala eyahlukeneyo ingabandakanywa kwiteyiphu eyi-1, enokuguqulwa ngokwahlukeneyo).

Eyona nto iphambili yindleko eziphezulu. Ukongeza kwitayiphu ngokwayo, exabisa malunga ne-ruble ye-35-45 kwi-1 m (ngesikhundla se-5 wt) kuya kufuneka uthenge omnye umlawuli, ukuhambisa amandla kunye nesinxibelelanisi.

Ukwenza ukukhanya kwegumbi eli-1, kunye nendawo ye-12-16 M² ngeRibbon-kuya kuthatha ii-ruble ezingama-1700 ukuya kwi-ruble i-ruble encinci (yesinxibelelanisi, i-BIT, itayitile ngokwayo) . Isibane esinexabiso eliphantsi siya kubiza malunga nee-ruble ezingama-600.

Ukongeza kwixabiso, thabatha lolunye ubunzima bokutshintsha i-1 ikhokelwa ngokwahlukeneyo. Ukuba i-LED 1 iya kutshintshwa ukuba itshintshe iteyiphu yonke.

Ezona ndawo ziphumeleleyo zofakelo

Ukukhetha indawo yokufaka kuxhomekeke kumsebenzi:

1. Iteyiphu isetyenziselwa ukhanyiso lwehopisi (ngokuzithandela, ngaphandle komthombo wokukhanya). Kule meko, i-upraltight ifakwe kwindawo enqwenelekayo (umzekelo - ngaphezulu komfanekiso, okanye ijikeleze umda we-niche, okanye phantsi kwekhabhathi yasekhitshini ekhutshwe). Ukukhanya akuyomfuneko okuqaqambileyo, kubhekiswa kwinto oyifunayo okanye umphezulu.
2. Iteyiphu isetyenziswa njengeyona ndlela iphambili. Kule meko, kuqhotyoshelwe indalo, iqhotyoshelwe apha ngasentla - ecaleni komphezulu wodonga okanye isilingi, ngokwelinye iskimu. I-LED kufuneka ibe namandla ekuqinisekiseni ukukhanya kwegumbi lonke. Ukukhanya kubhekiswa eludongeni, "ngaphakathi" kwigumbi lokuchitha.

Inqaku ngesihloko: Ungayibeka njani i-porcelain ye-porcelain statime + ifoto kwi-Interrior

Iindawo zokufaka iRibbon ukuba isetyenziswa njengowona mthombo wokukhanya:

• Ngophahla lwecala.
• Kwi-niche kwizilingi ezimisiweyo (inokwenziwa kwinqanaba lokufaka, okanye ukuba i-niles kwindawo yophahla sele ikhona).
• Ujikeleze i-perimeter-ngaphezulu kweendonga okanye kwisilingi.

Xa ufaka ifanitshala yasekhitshini

Ekhithi, iitephu ze-LED azisetyenziswanga njengokukhanya kakhulu - zifakwe kwintloko yekhitshi.

Iindawo zokufakelwa okunokwenzeka:

• Umphambili okanye ongasemva weplanga ezantsi kwezindlu ze-hood (ecaleni kwecebo) -Ukuba izibane ze-hood zibuthathaka;
• phantsi kwekhabhathi ekhuselweyo - kwikona (phakathi kwendawo yokuhlala kunye nodonga) okanye ezantsi kwelokhi emdaka (ngakumbi eludongeni);
• emazantsi etafile (kule meko, isibane esingasemva siya kuba sebuhleni kuphela);
• Kwiibhokisi ezihlawulelwayo, iishelfu zokuvula, iikhavathi - ukukhanyisa indawo.

Ngeendawo ezinje, ityhubhu idla ngokubekwa kwiprofayili, kodwa iglue kumphezulu, ingenasigqubuthelo.

Xa ufaka i-niche okanye i-bardrobe

I-ribbon inokuqaqambisa i-Inses yeKhabhinethi okanye indawo yangaphakathi ye-Plasterboard. Uninzi lwazo, bavuthiwe kumphezulu, ngaphandle kweeprofayili.

Iindawo zokufaka:

• Kwinzululwazi ye-niche okanye kwiKhabhinethi, ukuba inzulu (i-space engaphakathi) kwaye imele kwindawo ekhanyayo yenkukhu (ipaseji, okanye nje ukusuka kwifestile);
• ngaphakathi iidrowa (iikhabhathi, isifuba, iitafile zebhedi);
• ngaphakathi kwi-plartboard daikes yokupeyinta, ulwahlulo;
• Kwiikhabhathi ezindlwini zokuhlambela.

Iindlela zokufaka i-backlight

I-duolates inokubenyuka ngeendlela ezi-3:

1. Ebhokisini. I-eyomileyo yibhokisi ene-connice efihliweyo, efakwe kwi-ribbon (ayizukubonwa egumbini). I-thabatha kukuba ibhokisi ifakwe kuphela kwinqanaba lokulungisa igumbi, kwaye kuya kufuneka uyenze kuwo wonke umzi we-ribbon.
2. Kwiprofayili ekhethekileyo (iplastiki okanye i-aluminium). Inketho ilula kwaye iphantsi, inokusetyenziswa nangaliphi na ixesha (nokuba ulungiso alucwangciswanga). Ifakwe kuwo nawuphi na umphezulu (i-tile, i-Wallpaper, i-plasterboard, i-Brick, imithi njalo njalo).
3. Kwi-plthlering plnerth. I-Plinth Eli meko ayibekwe ecaleni kwesilingi, kodwa ngezantsi nge-5 ukuya kwi-10 cm kuyo. Kule guap kwaye kufakwe ityhubhu. I-plintnt inyukayo esilingweni. Phakathi kwenxalenye ephakanyisiweyo kunye nodonga, ukususwa kufunyanwa kweliphi irhamncwa ukuze kungabonakali apha ngezantsi.

Inqaku ngesihloko: Indawo yokuLonwabo kweli lizwe

Iindidi zamakhasethi e-LED

Iiteyiphu ze-LED ziyahluka:

1. Inani lemibala . Kukho i-monochrome okanye i-mulblolor (iRGB RIBBOS).
2. Uhlobo lokukhanya . Kukho iimpawu ezinamandla (iimpawu ezinokukhanya-ukukhanya, umbala-unokwahluka ngokomlawuli), iflethi (nge-angle (nge-angle) kwaye idla ngokukhanyisa isilingi (esetyenziselwa ukuqaqambisa isilingi).

Yintoni oyifunayo ukuze ufakelo?

Ukongeza kwitayitha ngokwayo kunye nombala owufunayo kunye nobude obufunayo, uya kudinga:

1. Umlawuli. Ngapha koko, iphaneli yolawulo. Kuyo kuya kuvula isibane sangasemva, kwaye sitshintshe umbala kwaye uhlengahlengise ukuqaqamba. Ingatyatyamba kwaye ikwade. Iqhagamshela kunikezelo lwamandla.
2. Ukunikezwa amandla. Idlala indima yomthengisi oguqula i-voltage kwinqwenelekayo. Amandla e-BP kuphela ekhethiwe, kuxhomekeke kubude kunye namandla eteyiphu.
3. Isinxibelelanisi . Sifanele ukuqhagamshela iziqwenga zomntu ngamnye kwi-tepi ibe enye. Unokuqokelela isibane se-back ngaphandle kwalo, kodwa ke uyakufuna i-testments.

Isikhokelo sokufakwa kwe-LED

Imiyalelo yenyathelo ngenyathelo:

1. Ubude be-thepe igqityiwe. Ukwenza oku, indlela yeParakethi icwangcisiwe kwaye ubude obugcweleyo bulinganiswa, kubandakanya iindawo ezifanelekileyo kwii-cusch kunye nabalawuli.
2. Izilayi zeeribbons zixhunyiwe kumgca omnye kunye nezihlanganisi (okanye ukuthengisa intsimbi).
3. Iteyiphu eqokelelweyo iqhagamshelwe kumlawuli, kwaye umlawuli kwi-BP. Eyona nto iphambili: Izibonda kufuneka zidityaniswe ngokuchanekileyo, kungenjalo unokukhubaza i-adralural xa ivuliwe.
4. Yenza umgca ohlanganisiweyo ungene kwisokethi kunye nokukhanya ukusuka kwi-console - ukujonga. Ukuba isiqithi se-back sawa phantsi - jonga ukuqaqamba kunye nemibala (ukuba inikezelwe).
5. Khubaza iteyiphu evela kumlawuli kunye nentaba kwindawo oyifunayo.

Xa i-Dalural iqhotyoshelwe, iqhagamshelwe kwisilawuli kwakhona, kwaye iphinde ihlole. Ukuba i-Wacksight isebenza ngokuqhelekileyo- umsebenzi ugqityiwe.

Iimpazamo ezinokubakho zikwindibano engalunganga yomxokelelwane.