Abaningi bathanda ukuchitha ukuzilibazisa kwabo emfuleni noma echibini. Ukuphumula okunjalo kuzojabulisa ngokwengeziwe, kukhange ngokwengeziwe uma ucabanga ngezikhukhula futhi wakhe kusenesikhathi. Isibonelo, isikebhe siyizandla zakho.
Isikebhe esihlongozwayo silula kakhulu futhi noma yimuphi umsebenzi wezandla angakwenza. Yenzelwe abantu abangu-2-3, ngaphandle kobunzima obuningi bangadluliselwa endlini ukuze bagcinwe.
Isisindo sakho sesikebhe esichaziwe sisondela esisindoni se-kayaks kanye nezikebhe, kepha ngokungafani nalokhu kungaba yimi kuyo, ukushintsha kwezinye izindawo. Ungahamba ngaphansi kwesikebhe nemoto, ubambe izinhlanzi nokuzingela. Isikebhe sinendlela yezikebhe ezijwayelekile zeVolk Volga, futhi yize ukugqwala kungukudla kodwa kunesivinini esikhulu futhi kuphephile.
Ukuqanjwa kwezikebhe nezinto zokwakha zokwakha kwalo
Isikebhe, esasibizwa ngokuthi "Volzhanka", sinobude obungu-4,5 m, ububanzi obungaba ngu-1.05 kanye nokujula kuka-0.4 m. Kuqukethe ifreyimu yokhuni (ukudayela) ne-plywood.
I-Plywood igcotshwe ngezimpukane ezincane zemichilo emincane yezinkuni (i-veneer) isetshenziswa kabanzi e-ShipBuilding ngenxa yamandla amakhulu emishini, i-homogeneity ephezulu kanye nokuqhathanisa.
Isisekelo sesethi yi-keel, enamathiselwe ekhaleni ekhaleni, yakha i-contour contour, futhi esithweni - ku-ahtertevin. Ama-kiel ama-coils akha ukuxhumeka okude yendlu amandla aguqukayo wecala nokuqina kwesimo kwawo kuhlinzekwa ngemiphetho ye-splint enezimbambo zokhuni ezidlala indima yohlaka, isiqhingi. Ingxenye engezansi ye-spangout ibizwa nge-fluortimbers, izingxenye ezimbili eziseceleni (amagatsha) angama-futoxins.
Ithiphu engenhla yesitshulu kanye ne-swarthhum ngemuva kokusongelwa i-plywood yazo iboshelwe ama-pair of purboards, anikeza amandla anele okwanele nokuqina kwesikebhe. Ngokuzayo, sizokubiza la mabhodi.
I-plywood trim iye yaguqa amashidi wonke, ngakho-ke umzimba unama-seams ambalwa kakhulu: ukuxhumana okubili okuguqukayo ezindaweni ze-2nd ne-4 swinger, okunamathiselwe kuyo, futhi ngokwengxenye eKiel. Ukwakheka kwesikebhe kunqunywa ngesimo se-swinger, esiphoqelelwa ukushaya umfazi. Ngasikhathi sinye, kutholakala amasekethe abushelelezi anele ezinhlangothini naseQuille futhi kuphela ekuchitheni 2 no-4 (ezindaweni ze-plywood) kuhlala kungukuphuka kwamanzi.
Ngenxa yefomu le-arched arrali, ukuqina okuncamelayo kunamandla kakhulu futhi kumelana nengcindezi yamanzi esikebheni sezindlu. Ukuvikela phansi kwecala kusuka ekushashweni mayelana nokushaqeka komfula ezindaweni ezincane ngaphezulu kwesikhumba se-plywood, kunamasu ambalwa ambalwa.
UFaneur on the trim kungcono ukuthatha i-birch, ngaphandle kwe-bitch, ungqimba ezintathu, 4-5 mm ubukhulu, okufakwe nge-resin glue
Ukwakha isikebhe, izinto ezilandelayo kufanele zilungiswe: 1) Favoroire ka-1500 × 1500 mm - amashidi ama-3; 2) Amabhodi e-Pine anobukhulu obungu-15 mm ubude obujwayelekile 6.5 m- 3 ama-PC; 3) Amabhodi amakhulu angama-25 mm: 2 - 6.5 m ubude be-keel ne-falsy, 1 - 2 m ubude paddle okuphakelayo; 4) Ibhodi elibanzi le-40 mm kanye ne-6.5 m ubude perline - 1 ama-PC.; 5) Amabhodi anobukhulu obungu-55 mm nobude obungu-2 m kwi-Fleged and Oars - ama-2 PC.; 6) Indwangu enqunu ukuhlanganisa leli cala - 9-10 m; 7) I-Laid Lime - 1 kg;
Imininingwane yokusebenza
Ukwakha isikebhe kwenziwa nge-stapel elula (Fig. 1). Ukuze wenze i-stapel, kuyadingeka ukugqoka amakholomu amathathu ezingeni elifanayo, ukubeka ibhodi kubo, likunamathisele ngezipikili. Ikholomu eyodwa kufanele icindezelwe, futhi ngokuma kwesibili ungasebenzisa udonga oluseduze.
Okokuqala udinga ukulungiselela ama-splits. Ukuze wenze lokhu, eshidini le-plywood, ama-splint quints adonswa (ngalezi zinhloso, iphepha lama-millimeter lingasetshenziswa).
Isibonelo, cabanga ukuthi i-splint 2 idonswa kanjani.
Ukuze wenze lokhu, le yimigqa eyisishiyagalolunye ehambisanayo njalo ngama-50 mm futhi aqine ngokuqinile kubo - mpo. Lesi sakamuva siyi-axis yesitezi se-spine esendaweni engamadayimane (DP), i.e. Indiza ende ende eqondile ehlobene nalowo mkhumbi ovumelana ngayo. Kusuka ku-dp kubeka ngaphandle kuzo zombili izinkomba, izingxenye ngokusho kuka-Fig. 2. Lapho uxhuma la maphuzu ngejika elibushelelezi (kungcono kakhulu ngesitimela esiguquguqukayo) i-contour yangaphandle yesitezi sangaphandle siyatholakala.
Ukudweba i-contour engaphakathi yama-fluortsrs, imigqa emibili ehambisanayo ingama-75 no-60 mm ukusuka emgqeni omkhulu (Fig. 3). Sihlehlisela ohlangothini ngalunye lwesifunda sangaphandle esiqondisweni se-PP 130 mm (for the Splits 2. 3 "4 - 130 mm, for ama-splits 1 no-5 - 100 mm). Lokhu kuzoba indawo yangaphakathi ye-Flortimberry Tide, sifeza umugqa othambekele phansi, esigabeni esingaphezulu sama-flortsrs.
Ukwakha i-contour engaphakathi ye-futoxon, sifaka umugqa ofanayo ngo-40 mm ngaphakathi esisekelweni sangaphandle. Ezindaweni zokuxhumana nabasebenza nge-fluortimbers, kuyadingeka ukunikeza ukuondla (bona Fig. 3). Ama-splits asele ayakhiwa ngokufanayo nalokhu okungenhla. Imidwebo yayo yonke into edidayo, ngaphandle kwe-II, iboniswe ku-Fig. ezine.
Sithatha iqabunga lokhalweni noma elinye iphepha elisobala laleli nani lokumboza yonke i-spline. Sikubeka emdwebeni we-spangout futhi sikopisha. Ngemuva kwalokho, iphepha ligoba ku-DP. Uma zombili izingxenye ze-spangling zihambisana, umsebenzi wenziwa kahle. Uma lokhu kungenjalo, udinga ukubheka umdwebo. Kokubili ingxenye ye-spline kumele ibe ngokulinganayo nge-DP.
Isihloko ngesihloko: I-Master Class ku-Candlers kusuka kumicu kanye namazinyo ngezandla zawo
Kusuka okhalweni, ingxenye ngayinye yezilwane ezidwetshiwe kufanele idluliselwe ekhadibhodi bese usika amaphethini we-flortimmers kanye nabakholelwa kwiFittoxists.
Lapho ukuqunjelwa kwezifanekiso kudluliselwa ebhodini (ubukhulu bebhodi ngu-40 mm; ibhodi kumele libe kuhhavini kuzo zombili izinhlangothi), izifanekiso kufanele zibekwe eceleni kwemicu ukuze zisike izingqimba zokhuni.
Amaphethini we-Fitoxists kanye ne-Footox ngokwawo kuyinto efiselekayo ukudweba nokunquma nge-Reserve ngobude, okuyi-Fig. I-3 no-4 ikhishwa kubo bonke abangofezethi be-Fittoxists. Lezi zitoko zizoba! Isidingo lapho uqoqa uhlaka.
Kukhululiwe futhi kukhishwe i-futecons kanye ne-flortim drive for mhlangano kufakwa emdwebeni (Fig. 5).
Siphawula ipensela noma ukukhethwa okubukhali kwezindawo ze-Overlaps zokuxhuma ama-flortimber and futfoxists. Bese ukukhala bese ukhetha izindawo zokuxhumana, njengoba kukhonjisiwe ku-Fig. 5. Ukuhlabelela izindawo ezichaziwe ngokuqinisekile kuze kube yilapho maphakathi akufanele, kuyadingeka ukushiya isitoko sika-0.5-1 mm, osuse i-chisel noma i-rashpyl lapho kufaneleka.
Ukuqonde ngokuqinile komunye nomunye yonke imininingwane ye-splint ebekwe ngokuqinile futhi uqiniseke ukuthi i-contour yangaphandle ye-splint isethwe ngqo ngokudweba, kuyadingeka ukuwathwala ngezipikili. Izipikili kufanele ziboshwe noma zihlukaniswe. Ngokuqina emaphethelweni ama-Fitoxists, ibha yesikhashana ilondliwe - amabhere, okudluliselwa kulo! Umugqa we-DP (bheka i-Fig. 5).
Ama-splints asele enziwe ngendlela efanayo. Kusukela ngo-1, 3 no-5 plywood ku-plywood, bangenziwa bengasindi emabhodini ngokukhulu kuka-25-30 mm.
I-STENTEREE ne-Ahterterin benziwa kangcono kusuka kucezu oluqinile olugobile olugobile, olungcono kusuka ku-Elm noma ku-oki. Uma bengekho, bangakhethwa nganoma yiluphi uhlobo lwezinkuni, kepha kuyinto efiselekayo ukuthi izingqimba zokhuni zibe yi-curve futhi lokhu kuqothuka kufanele kuhambisane nokugoba izitshulu.
Uma isihlahla esigoqiwe singavezi, ibhande lingenziwa ngenhlanganisela yezingxenye ezimbili, njengoba kukhonjisiwe ku-Fig. 6.
Imidwebo yezitshudeni idonswa ku-plywood, bese idlulisela ezintweni ezibonakalayo. Okokuqala udinga ukusika olele eceleni kwe-contour, bese ucwilisa umphetho wakhe wenqwaba ngigqekeza ama-DP ku-DP, bese ngokuqinile.
Ukuze uthole keel, bakhetha umnyombo, awukho umnyombo, ibhodi elimnyama elinobukhulu obungu-25 mm, ubude obungu-3.5 m. Ngaphezulu, imigqa emibili ehambisanayo ibukwa kude ngo-70 mm kusuka komunye nomunye. Ngale migqa, iBhodi ibukhali ngendlela yokuthi inesimo esingunxande ngaphandle kokuhlanekezela phansi yonke ubude.
Amabhodi e-Onboard kumele atshalwe futhi abheke ukuze athole ububanzi obufanayo (150 mm) kanye nobude babo (cishe ama-5 m). Uma kukhona amabhodi amakhulu angama-25 mm esitokweni, kufanele aphathwe ngo-15 mm obukhulu.
Ubukhulu bawo bobabili amabhodi kufanele kube okufanayo ukuze baphuthunyiswe kahle futhi abanikezenga ukuhlanekezela. Engxenyeni ephakathi nendawo, lapho kudingekile khona ukunamathisela imifudlana, kubaluleke kakhulu ukubekezelela ubukhulu.
Ibhodi ye-tramer, yakha umphetho ophakelayo wesikejana, lungiselela emabhodini ngosayizi ongu-25 mm. I-trauma inesimo sokulingana okulingana, lapho izinhlangothi ezimbili zikhuphuka kancane, neyesithathu, phezulu - i-convex. Emaphethelweni aphezulu we-transom for amandla, ibha evundlile ilungisiwe (bheka umdwebo 4).
Isikebhe sokubutha
Umhlangano wezingxenye zesikejana uqala kwi-Workbench, bese uqeda emhlabeni. E-Workbench babeka i-keel, esiphelweni esisodwa sokuthi u-Ahterterin onamathele ku-transit ahleliwe enqabeni, kanti omunye - isiqu. I-Kiel enoShames kanye nama-swarthhums axhunywe yizipikili, ama-bolts amancane, ama-rivets noma izikulufo ezinkulu (05-6 mm).
Kumele sihlole ngokucophelela uma kungekho ukuhlanekezela. Ziqedwa ngokufanele. Ukuhlola intambo ye-DP kanye ne-transom, udinga ukufaka amaphuzu ku-carnation bese udonsa i-twine phakathi kwabo. Vele uqiniseke ukuthi izikhungo ze-keel nesitoko zingumugqa owodwa oqondile, ekugcineni ungabopha.
Kuzo zonke izinhlanganisela, iphepha le-porous noma indwangu enhle, efakwe nge-resin noma upende obukhulu. Kwenze, kwenze kubeke ngengxenye engenhla ukuze bakhule bangama-3 4 mm ukujula ezansi, ngemuva kwalokho ingxenye engenhla esuswe, ifakwa kwi-resin noma pad pad .
Uma izikhala zisetshenziselwa ukuqinisa, kufanele zibe ngalutho ukuze zikwazi ukwenza ngaphezu kwezingxenye ezixhunyiwe. Okuhle kwazo zonke izipikili (ama-rivets) ukushaya ngaphandle nokugoba (noma ukugoqa) kusuka ngaphakathi kwesikejana. Lapho inceku iyadingeka ukugqoka i-08-10 mm puck ngokuphela okubukhali kwesipikili. Izimbobo zezinzipho ziqhutshwa kahle kakhulu ngo-1 mm Drill ngaphansi kobubanzi besipikili.
Ngemuva kokuba izitshulu zibeke izigameko. Emugqeni we-DP ezinhlafunweni ngakwesokunene, kuyadingeka ukwenza ukusikwa ngaphansi kwe-keel. Ukuze i-splint iqinile futhi ithembeke kakhulu eKeel, ukusika kufanele kusikwe cishe ngo-0,5 mm sekuvele ku-spline. Uma ububanzi be-keel bukhulu futhi i-splint ayikwazi ukutshalwa, i-keel ingaqondiswa kancane. Ukufika kufanele kubhekwe ewathini anwetshiwe, okufanele ahambisane nama-DP bims. Uma ukwehla kwesithathu kwenziwa ngobukhulu baka-25 mm, ngaphambi kokumboza izitobha ezinkulu, kuyadingeka ukubeka umucu we-plywood wobubanzi obuyi-100 mm bese unciphisa ubukhulu be-plywood.
Ukubeka ama-splits ngakwesokunene ku-keel, ungaqala ukufaneleka kwabo kokugcina ngezipikili ezinobude obungama-75 mm. Emva kwalokho, ngidinga ukunika i-boom Boom. Thatha ibha engajwayelekile noma eyindilinga, uyibophe okwesikhashana emaphethelweni we-keel kusuka ngaphakathi, ezindaweni ezisibopha ngamatshe, futhi phakathi kwezingodo kanye nababulali, i-bar engu-110 mm (Fig. 7 , a). Ukuqeda ama-distillations aseceleni, ama-bims, izindunduma kanye nosizi kufanele futhi kuhlanganiswe okwesikhashana nge-DP nganoma iyiphi ibha (ngokwesibonelo, okusele ngemuva kokusika okusikiwe).
Isihloko ngesihloko: ama-roses avela ephepheni elihlanganisiwe. I-Master Class
Amabhodi ase-On-Board asetshenziswa kuzo zombili izinhlangothi zohlaka futhi iziphetho zazo ziboshwe ngokuqinile yi-twine to the eningizimu. Ngemuva kwalokho, amabhodi okubopha ama-onboard ngokucophelela azungeze ama-swarthhums, asebenze ku-transnt futhi ahlanganise. Ama-Exteres Ends kufanele ancishiswe. Kuthunyelwe endaweni yohlangothi kuyabethelwa okwesikhashana. Kucima emuva emuva kwesikebhe, esinqunyelwe bese uplywood. Uhlaka olulungiselelwe unqunu luboniswe ku-Fig. 7.6, kanti imigoqo yesikhashana ikhonjiswa ngomugqa wamachashazi.
Ukulondolozwa kohlaka
Lapho uhlaka luhlangene, kuyadingeka ukulususa nge-keel, ukubeka ukuze kuphakamise umhlaba hhayi ngezinhlangothi, kepha iziphetho eziphakeme zabasosayensi bezinto ezifelazayo, bese uqala isikhathi esinzima kakhulu sezakhiwo ze isikebhe - ukuncipha kweplywood.
Ngaphambi kokubeka trim, udinga "ukumamatheka" izigxobo, i.e. Susa uChammfer emaphethelweni abo, azoqinisekisa ukulungiswa okuminyene kwalesi simo. Ku-Fig. I-8 ikhombisa amakona ayisibonelo wemephu. Kodwa-ke, kungcono ukuzulazula emakhoneni, kepha faka ujantshi omncane kwi-PIN bese ususa uChammfer, kuze kube yilapho ujantshi kuzo zonke izindawo ngeke zihambisane kahle naku-spline.
Ezingxenyeni ze-nasal ne-forage, i-janeer isikwa ngendlela ye-trapezoid. Phezulu kwezisekelo zalo, zenza umugqa oyindilinga esikhungweni bese ugcotshwa eduzane no-avespore. Ziyadingeka ukuze i-plywood, iqale kancane kancane isuka endaweni evundlile eKiel, egobeke kahle kwi-Forstevna.
Uma i-plywood izokwehla futhi ikhungatheke kabi, kufanele ifakwe ngaphakathi ngaphakathi. Kuhle ukuhlukanisa, lapho athululela khona amanzi abilayo abilayo emkhombeni futhi ambozwe ngokuqinile ishidi neshidi le-plywood elifafazwe imizuzu engu-10-16. Uma kungenzeka, kungenzeka ukufudumeza umkhombe kusuka phansi ukuze amanzi abilisekile.
Ku-Fig. I-9 ikhombisa ukusika okuyisibonelo kwe-plywood, okungafaneleka uhlaka. Ubukhulu obuqondile bunqunywa khona lapho, futhi bancike ekumelaneni kweplywood of deflection nokuthi iBhodi lizophikisana kanjani.
Imicu yezendlalelo zangaphandle ze-plywood ibekwe phansi ubude behlangothini (hhayi ngaphesheya), futhi amashidi anqunywe ngokuya ngokubuyiselwa emuva kwe-30-40 mm. Ukuze wenze lokhu, udinga ukubeka lesi sikhungo kwisikhungo, futhi isisekelo esibanzi se-spline 2. Kuthunyelwe nguPhaneru ukuze kungahambi kahle, udinga ukuqala kabusha kusuka ku-keel kuya ezinhlangothini. Lapho i-plywood ithinta izinhlangothi, kuyadingeka ukuyibopha ngentambo noma nge-wire kanye nezinhlangothi, nasezindaweni lapho i-plywood isuka khona kusuka ezintabeni, ukubeka ama-wedges ngaphansi kwentambo. Izindawo zokuxhumana ze-plywood nge-swarthihum kumele zinamathiselwe kwizipikili ezinama-lining, kancane kancane ziqeda ukushaya amafomu amafomu nezinhlangothi.
Lapho i-plywood ihlala ihlala, udinga ukufunda imigqa kuyo emipheni ye-spline, ukunyundela kanye nezinhlangothi kuso. Ngemuva kwalokho, uPhaneru kufanele asuswe, ukufunda imigqa ehambisanayo, abuyele ngaphakathi emigqeni edonswe ngaphambili ezinhlangothini ezingama-50 mm, ngokusho kwe-ethehera - kanye ne-20 mm.
Ngemuva kokugcwala kwe-plywood, okwavela kulayini wesibili we-battwen, kuyasikwa, kusetshenziswa futhi endaweni, kulokhu okumboze ingxenye yobubanzi ye-swinger 2. Ngasikhathi sinye, akufanele ukhohlwe Isaga saseRussia: "Zizofa kaningi, ziphinde ziphinde." Uma kwenzeka kwenzeka ukuthi inqunywe kakhulu futhi ishidi lokuphuma ngeke limboze ngqo uhhafu we-splint 2, khona-ke lokhu akusho ukuthi ishidi liphangwa. Ukuze uyisebenzise, udinga ukuhambisa i-spark ku-quillet noma, njenge-resort yokugcina, ukunciphisa isitekisi endaweni yesehlakalo sokuthambisa. Amashidi asele aqhuma ngokufanayo nowokuqala.
Emafwini 2 no-4, i-plywood ixhumeke ngobuningi, ngakho-ke kuyadingeka ukuthi uxhumano obukhulu onqenqemeni, amashidi aqinile amashidi aqinile, ukuze akwazi ukuwahambisana kahle. Lapho wonke amashidi amathathu efakiwe, angahle ahlelwe ekugcineni ngezipikili ezinobude obungama-30 mm. Ibanga phakathi kwezipikili - 25 mm. Ngasikhathi sinye, i-keel ivaliwe nge-plywood futhi ihlala ngaphakathi kwezindlu, futhi izindunduma engxenyeni yobukhulu bayo zivezwa.
Izinsika zibekwe kahle kakhulu ku-plunk, i.e. E-groove, eyenziwe ngobukhulu kanye ne-contour ye-plywood. Kungenzeka ukwenza ngaphandle kolunye ulimi, kepha bese kuthi umngcele onamakhono kufanele ube nefomu eliveziwe, futhi ukuze i-plywood kuleli cala ayizukuzala, kanye namandla amakhulu, ibekelwe amaShames kanye ne-Transtion ephahleni I-Iron strip. Ku-transducer, uPhanera wethulwa e-spool (Fig. 10, a no b). Ngaphambi komoya osheshayo, izingxenye kufanele zimbozwe nge-resin noma upende kawoyela.
Lapho i-casing ifakwe cishe nge-100 mm ohlangothini, ekugcineni kuyasuswa, i-plywood ihlelwe ezinhlafunweni nasebhodini le-plywood. Ibhodi ekugcineni linamathiselwe ekuqhekekeni nasezintanjeni ngezipikili ezinabahlanzi. Ngaphansi kwezinhlangothi, ngenhla komphetho we-plywood, phakathi kwezinhlangothi, ama-plywoods kanye nama-terrests afakwa yizicucu (Fig. 10, b).
Uma i-fanonoire ilungiselelwe emabazini kanye nama-shorthings ukubopha ngaphandle, khona-ke ihlelwe ngaphakathi kwama-20-millimeter ezipikili nge-plywood band noma i-30-millimeter Width Rail (Fig. 10, B). Ibanga phakathi kwezipikili lingama-40 mm. Izipikili kufanele zifakwe emigqeni emibili - kwenziwa ukuze ungaqedi amabhodi ebhodi.
Isihloko ngesihloko: Izisusa ze-round and skwele crochet ngeSchemes
Qeda futhi ufake imibala
Ukuqinisekisa amandla amakhulu wecala, lo mncane uqiniswa ngendwangu. Isembozo sinqunywe esikhwameni noma ezinye izicubu ngesibalo ukumboza yonke indawo yomzimba ezinhlangothini. Lapho kwenziwa umsebenzi wokusebenza futhi wathungatha leli cala, usadinga ukwenza ama-falsils amabili aseceleni kanye nenganekwane eyengeziwe ephakathi. Zivikela phansi ogwini ogwini, futhi ziqeda kakhulu uhlangothi oluseceleni lapho luhamba ngaphansi kohambo.
I-FALSHAND ikhiqizwa njengoba kukhonjisiwe ku-Fig. ezine.
Ngokumangala okuyinkohliso ebangeni le-170 mm ezinhlangothini zombili ze-DP kusuka ohlangothini lwangaphakathi lwe-spangling 2, 3 no-4, izimbobo ezimbili ezimile ezilingana nobubanzi obulingana nobubanzi be-bolts. Qaphela ukuphuma komgodi ku-FakeBill enezinganekwane, izimbobo ezifanayo ziyachithwa kuzo. Ngaphambi kokuthi uklebhule uFalekili, udinga ukubeka isikebhe. Kulokhu, ipuleti lilungiselelwe kusuka kumaHarses nama-resin. I-lime ecwila ngesihlungo ithululelwa ezitsheni ezincane noma emhlanjini ohlanzekile, phakathi kwenza umgodi lapho i-resin ithululelwa khona, futhi ihambisane ngokulinganayo nge-lime kusuka emaphethelweni. I-PutChal kufanele ibe njengenhlama ye-liquid.
I-Lime ihamba kancane ibonge futhi igoqwe kahle ngesihlahla. Ngokusebenzisa uPutty kwenza i-spatula encane. Ngalo, ihlikihla ngokucophelela ama-seams, izingxenye zokuxhuma, imifantu, imigodi kanye nama-slots phakathi kwezinhlangothi.
Ukusuka ngaphandle, isikebhe simbozwe ngokhuni resin, njengezikebhe eziningi. Kulokhu, i-resin idinga ukubiliswa imizuzu engu-10-16 futhi isesimweni esishisayo ukuletha ibhulashi ohlangothini, hhayi ukuvumela abaxoxo. Uma i-resin ipholile, kufanele iphinde ishiswe futhi, ngoba i-resin eshisayo ingena kangcono izinkuni. Lapho ukubilisa, kufanele kuthathwe ukuqapha, ngoba ama-resin akhanyisa kalula. Ngemuva kombala onemibala emibili kuyadingeka ukugqoka icala eline-crosslocked (ngaphambi kokomiswa kwe-resin). Masinyane unamathela futhi uqhubeke kahle ezindlini. Onke amafolda nemibimbi kufanele abuyiselwe, amaphethelo asele ukugcwalisa igebe phakathi kohlangothi kanye ne-plywood. Ngemuva kwalokho, ekugcineni ungakwazi ukunqamula ama-bolts angamanga (i-falsecal eyengeziwe ingafakwa kwizipikili).
Ngemuva kokufaka amanga, ambozwe nge-resin ngasikhathi sinye ne-camera yomzimba wecala okwesithathu (kuze kube sekupheleni kwezicubu), khona-ke isikebhe kufanele sehliswe phansi, sisuse zombili izingodo zesikhashana bese ususa okuseleyo kwe-futoxon. Ingaphakathi nesokumbozwa yi-Oliff evuthayo kabili ngekhefu lamahora angama-35, nangemva kokumiswa, ukupenda ngopende kawoyela kwanoma yimuphi umbala.
Ukwenza Ukuthokoza Futhi mnene
Ama-oars angenziwa kusuka kubha, i-porger enkulu noma ibhodi elingu-55 mm. Okokuqala, kuyadingeka ukumaka uphawu bese ucindezela imigqa yama-oars (isikhundla a), bese-ke, uguqule i-paddle 90 °, ukuyicubungula (isikhundla b). Ngemuva kwalokho, udinga ukwenza yonke imijikelezo futhi uhlanze i-paddle. Ama-oars kudingeka kwenziwe nalesi sibalo ukuze ama-spindle ndawonye kanye ne-blade kwakungu-roller omncane onzima. Uma lokhu kungenzeki ukufeza, ungangeza i-Metal Concerioght eValek. Ama-oars aqediwe agaya isikhumba, ama-olive aphindwe kabili futhi ambozwe ngopende kawoyela. I-Feed Paddle eyenziwe ebhodini le-25-mm.
Lapho zihlinzekwa, ibala kufanele lingene emanzini ngokuqondile, futhi izibambo zihamba kancane ngaphezulu kolunye. Omkhulu i-roller ehlombe, okulula okuzogibela. Lapho ugibela ngokushesha, umkhuba wokugcina izibandela ziphezu kolunye.
Ukwakha ukusekelwa okuqinile, ohlangothini lwamakhanda aqukethe ipuleti lensimbi lapho ishubhu lensimbi ye-diexer efiselekayo lifunwa. Ukutholwa kuhlanza ngokwako ezinhlangothini kusuka ngaphandle (Fig. 4), futhi kunconywa ukwenza elinye lamashubhu nge-20-25 mm eliphakeme kunolunye ukuncipha kwelinye lamashubhu.
Ukuthi esikebheni kungahamba, udinga ukwenza i-bale. Zenziwe ngama-flaps ahlukile - amakhala, okuphakelayo kanye nemiphakathi emibili. Ngokusekelwa kwezihlangu ku-splits, ojantshi wesikwele 12 mm ngaphansi kwendiza ephezulu yama-flortimber.
Indawo yamathini aphakathi nangemuva aphawulwa emaphethelweni aphansi ezinhlangothini. Amabhange akhiqizwa ebhodini lama-millimeter. Ngaphansi kwamabhange ezinhlangothini, kufanele uzulazule ojayelana ngo-20 × 20 mm. Amabhange abopha ngezipikili noma ngezikulufo ezingcono. Ingaphambili lingafakwa emaphethelweni aphezulu ezinhlangothini. Kungaba ukuhlala phezu kwaso, kepha inhloso yayo eyinhloko ukukhonza njengokusekelwa kwe-mast.
Ngaphambi kokuba ucele i-Front Bank, kwenza ukuvulwa kwesikwele esingu-50 × 50 mm, bese ku-keel - i-slot 10 × 15 mm ukujula kwe-10 mm. Izimbobo ezisebhange nesidleke kufanele zibe kulayini owodwa mpo.
Ekuqaleni, isikebhe kufanele sibekwe ngqo emanzini, ngaphandle kokuthinta inhlabathi, ukuze isihlabathi namatshe amatshe amancane anganamatheli ku-resin. Ukuvikela i-acropryry kufanele kwenziwe izinsuku ezingama-30- 40 kuze kube i-resin eyomile ekugcineni.
Isondo lokuqondisa alwenzi isikebhe. Njengezikebhe zokudoba, kuthathelwa indawo nge-paddle ethungatha, enezinto ezithile eziqhathaniswa nesondo lokuqondisa elimisiwe. I-feed paddle ingahle ifakwe uphawu nokuqondisa.
Uma kunezimbobo ezingahleliwe, kufanele zigawulwe ngezingcezu ze-plywood kusuka ngaphakathi. Ama-patches anazo ubukhulu amasampula amaningi abekwe izipikili eziyi-12-mm futhi acophe ngokucophelela.
Gcina isikebhe kufanele kube ngaphansi kophahla. Ukuze kuthathe isikhala esincane, kungamiswa.