Independent performance of work related to repairs, often requires knowledge of how to install a plastic door. This is necessary when replacing the balcony block, input or interior doors.
All work is carried out in strict accordance with the requirements for these structures and is directly related to the preservation of their integrity. All installation manipulations are performed using a specific tool prepared in advance.
First stage or start of installation
Installing the inlet plastic doors begins with measurements, which can be performed alone, but if there is no confidence in your ability, it is better to turn to experienced masters.
If the installed profile according to its size accurately corresponds to the parameters of the door frame, then the installation of the plastic door will not be difficult.
Interested in how to install an inlet plastic door to not only secure, but also to decorate your home, it is worth paying attention to the fact that this installation is quite similar to the installation of other structures of this kind.
Using the PVC doors as an entrance design in the house of the PVC door, it is necessary to especially carefully perform preparatory work, from which the installation of plastic doors begins with their own hands. It is worth paying attention to the preparation of the doorway directly. All components must be:
- clean;
- dry;
- without damage.
All sides of the opening should be carefully cleansed from possible contaminants, twice to treat the surface of the primer and after complete drying to start mounting.
Before installing the door, pamper by wooden wedges
The installation of PVC entrance doors is carried out after the acquisition of the structure, the dimensions of which guarantee the presence of a distance from the box to the wall of the wall of at least 2 centimeters.
Starting work, you must first take care of the presence of a sufficient number of wooden wedges. Their use greatly facilitates the installation process. In the process of work, such wedges will be needed for high-quality alignment of the design relative to the walls and in accordance with the level.
Article on the topic: Instructions for cutting ceiling plinth in the corners
Drill holes in side boards
To implement the issue, how to install a plastic door with your own hands, you should begin with the fact that they are disassembled by separating the box from the most. In the side boards, you need to drill holes in which the bolts will later be inserted and you can now start the installation.
The box is inserted into the opening and, using wooden wedges, exhibit it strictly in terms of level. Wedges need to be inserted so that they provide an effective spacer, making the box still.
Making sure that the adjustment was carried out correctly, it was possible to put the construction of absolutely even and wedges would help to keep it in this position, the design is fixed with the help of bolts screwed into the drilled holes.
Stage second or installation directly doors
Be sure to check the quality of the mount
How to install a plastic door? The answer to this question is simple. Installing the construction is needed after an additional check of the quality of fastening and matching the level.
Such a check is performed several times before the final installation of the input plastic doors. If the disadvantages are eliminated, all elements are easily moving and tightly closed, it is possible using the mounting foam, fill all the existing slots and leave until the composition is completely frozen. For details on the installation of plastic doors, see this video:
It must be remembered that the use of mounting foam is permissible for sealing existing cracks, but it is unacceptable to apply this composition to correct the shortcoming or fitting the dimensions of the door frame.
If the box is installed in terms of and firmly fixed, the installation of the plastic door does not take much time and will not be much difficult. Houging the main part on the loop, it is necessary to check the ease of closing and opening, make sure that there are no rubbing and obstacles for free stroke. Read more about Mounting Balcony Doors See this video:
Article on the topic: Install the window sills and make out the slopes in a wooden house with your own hands
The one who tried to mount a similar system himself, perfectly knows how important it is timely eliminating all the problems until the door starts to be installed on its own. It will be impossible to fix anything later.