Important elements of the balcony design are hinges for plastic doors. In most cases, apartments are installed on the loggia or a balcony plastic products, such as windows and doors.
They are fixed using special loops that must be undoubtedly durable. This will depend on the reliability of the whole design. They withstand heavy loads for a long service time, although sometimes require regulation.
At the time when loops for PVC doors are made, durable material is used, which increases the reliability of the attachment. It is important to pay special attention to these elements when buying a canvase.
Varieties and device
Hinges for doors Choose from high-quality alloy
At the time of acquiring plastic structures, it should be remembered that loops can have different types and characteristics:
- Choosing door loops need to familiarize yourself with the requirements of the entire design as a whole. Only after that it will be clear which elements will be required.
- Theoretically plastic windows and canvas perform one function, the difference only in size. Due to this, for the plastic door fasteners must have a more durable type.
- For doors, a loop is suitable, which is made of aluminum alloy. Due to the strength of the material, the reliability of the attachment will increase at times.
- At the time of purchase of balcony doors, it is best to choose such fastening elements that have the control function. Due to this, it will be possible if necessary to perform the design of the design vertically or horizontally;
It is important to remember that during the operation of the fastening mechanisms that are responsible for the opening and closing of the doors, it is necessary to occasionally lubricate. From this will depend on the quality of the construction service.
Features
Loop Set
Throughout the entire operational time, the door loops are subject to large loads. For this reason, they are produced from durable materials, such as: metal, stainless steel and teflon.
Article on the topic: Eaves of foam - "cheap and angry"
The goal of loops for balcony plastic doors is to secure the design to the main box, as well as take off and closing. At the time of closing, the canvas occurs a dense adjoining to the frame, due to which the cold air is not selected into the room.
The door loop is designed from elements such as:
- tripod. It is used to fix the canvas;
- Metal tabs (installed on the canvas);
- sleeve. They are produced most often from Teflon.
Visually loop, which is used for the device of plastic structures, is similar to the analog that is installed on interior doors. But there is one obvious difference, loops for plastic openings must be adjusted after the installation.
Using this feature, it is possible to adjust the entire process of opening and closing the canvas without much difficulty. It also allows you to avoid obvious gaps that can form between doors and frames.
In most situations, the loops are mounted using a special template, due to this, and the ability to adjust the horizontal structure appears.
Vertical regulation is carried out by a special screw
Vertical regulation is performed using a special screw, which is located on the loop. These screws are hidden behind the bar, which throughout the operation will protect the structure from the penetration of dust.
If necessary, the protective bar can easily disassemble, after which it is adjusted. On how to adjust the accessories of the balcony door, see this video:
Replacement of loops
If after installation there is a breakdown due to the manufacturer's fault, it is necessary to replace the part that failed. To do this, you will need a specific list of tools:
- Passatia of fine type;
- a small hammer;
- screwdriver.
For each element of the design, the detailed instructions for assembling and dismantling are attached, and it looks like this:
- A plank is dismantled, which is located on top of the structure;
- the axial mechanism is partially knocked out;
- With the help of thin passatizes, it is necessary to pull it out;
- the door to herself takes extremely neatly;
- Then a little need to lift the door leaf and remove it from the existing loops.
Article on the topic: Decorative chips (painted bark) in landscape design (32 photos)
By completing the presented sequence, it should be dismantled by the detail, after which it gives the product to the original appearance in the reverse order. For details on how to change the plastic door and loops, see this video:
A clear follow-up of the applied instruction allows you to replace the faulty parts without extra effort and competently perform periodic repairs, which will have a positive effect on the operation of the entire design.