Faulty plumbing is a big problem for every owners, but in most cases it can be easily eliminated.
Drawing toilet bowl.
If the water in the toilet flows constantly, the drain works badly, then this is a signal for making urgent measures to eliminate this malfunction.
After all, leaks in the toilet carries high humidity, constant background noise, troubles with neighbors and high amounts of utility bills.
How to fix flow in the toilet
You can call a specialist who will quickly eliminate the plums in the toilet in the very short time. But in this case you will have to pay for its services. And you can do the repair of a malfunction yourself, having all the necessary tools and knowing how to do it right. Yes, and learn to such a simple matter, especially, such knowledge will always be useful to every man.
To the blocking of the toilet bowl, water enters under a certain pressure, so before proceeding with work, at the very beginning, it is necessary to overlap the flow of water into the tank and the toilet. Such precaution will help to avoid possible water leakage on the floor in the toilet. Now you need to find out which item is faulty.
Device diagram toilet bowl.
What instruments may need:
- Fire and sandpaper;
- drill;
- bit;
- screwdriver.
What materials should be:
- silicone sealant;
- cement;
- rubber seal;
- two-component epoxy resin;
- If some particular part broke, then have its new analog.
The most difficult and responsible stage of all work is the correct identification of the essence of the problem: why water flows? The mechanism itself, with the help of which the drain of water in the toilet is not so complicated. But the entire drain system consists of a certain number of parts and connections, to whose work it is necessary to see and identify a malfunction among them.
Article on the topic: How to fix the thread when embroidering a cross: at the beginning and at the end, video, the right ways
Causes causing water
Toilet bowl repair scheme.
- When washed with water runs below, from the place of connection to the toilet bowl to the sewer pipe, if the cabbage crashed in the cast-iron termination. Often when installing plumbing workers are determined by a very short time for passing the object. The toilet is mounted on a cement solution, which is almost impossible to dismantle. This installation provides sufficiently high tightness. Over time, the solution cracks, and if certain deposits were accumulated under the sockel pipe, then during the wash it fills it with water. So, and flow to the bottom of the toilet is provided.
- The rubber cuff or corrugations, the tightness of the compound is provided with thin rubber membranes. Like any other tires, gradually the data of the membrane lose elasticity and dry. Gaps appear between the seal and release of the toilet. Water should be freely leaving the oblique release, even in the absence of tightness without any problems. But if there is sediments and trash in front of the socket, the water during washing will begin to pour the connection, then the water leakage is provided.
Elimination:
- In the first case, with a strong screwdriver or narrow bit, it should be carefully started to remove the removal residues from the termination. A poorly aimed or too strong blow can split a fool. After the whole old putty is removed, it will be necessary to reinstall the joint. The material for this can serve as diluted without sand cement or silicone sealant.
- In the second case, it will be necessary to first clean the drain and remove the remains of cement and garbage from the raster. It is not recommended to smell cracks just to cement. After such a repair it will be possible to notice that water leaks again as soon as possible.
Two repair paths are known here:
- If the toilet is removed without much effort, it will be wiser only to replace the cuff. A new seal can be planted immediately on silicone sealant. In this case, the long lack of leaks is guaranteed.
- If the replacement of the rubber seal is impossible, then the rubber seal around the circle of release and the termination should be used, and the silicone sealant should be applied to the resulting slot.
Article on the topic: Hilderboard is harmful to health: True and fiction
Crack in more often toilet
If a crack appeared in the visible place of the toilet, through which water flows, and the plumbing replacement for some reason is impossible, then such a defect can be eliminated. To do this, you will need to sew the drill on the kafel at the ends of the crack two holes. It is necessary that fayans cracked. Then it will be necessary to carefully walk around the crack of the emery or a file and then apply a two-component epoxy resin. And leave everything to complete drying. Perhaps after this, the toilet will look outnetic, but it will work properly.Crash at the base of the toilet
If the neighbors constantly complain about the wet ceiling and under the toilet all the time it costs water, with no explicit sources for the appearance of water, then in this case, when water drops, some part it flows out. Such a phenomenon is characteristic of a crack at the base of the toilet. The reason for the appearance of the crack is poured boiling water, the faience is afraid of sharp temperature drops and is cracking when they are shifted. The exit here can be only one: replacement toilet bowl.
Another reason why the toilet flows is poorly screwed mounts to the floor. In this case, you should check all the mounts. And if there is a need, then pull them out or replace with new items. When tightening the fasteners, certain caution is required, because at a large pressure, the tile can crack the tile.