In our time, a cork board on the wall has become increasingly for interior decoration and design.
Such boards are made from the cortex of cork oak, which is pre-kept in the air about six months. Such a preparation process significantly improves the quality of future finishing material.
The tree itself does not suffer at the same time, approximately after 8 years there is a new bark of the same thickness.
Quality of cork material
This material has a lot of positive qualities: it is very light, quite elastic and elastic. If pressure is put on it, then after a while it returns to its original position. Well tolerate damage and strikes.
The cork board has a high degree of sound insulation and retains warmth well. The plug consists of a plurality of air bubbles, isolated from each other, which perfectly absorb outside sounds. Such material does not cause an allergic reaction in people.
This material refractory and does not miss moisture and smells, it can be used to finish the sauna, pools or baths, they are finished with kitchens and bathrooms. Even with open fire, this material will not ignite.
The cork material is a wonderful antistatic, he does not attract dust and does not absorb her. The cork board is not exposed to rot or mold, insects and various chemicals are also not hazardous for it. For this boards are covered with hot wax.
If you finish the walls with cork material, then it will be able to serve several dozen years. It is very simple to care for such a coating, sometimes cleaning with a vacuum cleaner or a soft damp cloth.
The stains are easily removed with soapy solution, and the panel after that you need to wipe dry.
Varieties of cork board
In specialized stores you can find several varieties of this finishing material. This board is a rectangular or square sheet made of crushed and compressed cork, which is covered with a cork veneer from above.
Article on the topic: Easter eggs with silk tulips
The thickness of such boards is small, only about 3 mm, it can consist of one or two layers. Standard Board size - 600x300 or 300x300 mm. Sometimes the walls are separated by cork laminate, which is used mainly for the floor. Cork boards on their qualities are several times superior to rolls or wallpapers from traffic.
The texture and color of cork boards meet a wide variety, they can resemble a light sandy shore or look like dark brown wood. They can be performed in one color or multicolored, there are rough and smooth to the touch.
How to fix boards on the wall
If you need to cover with plugboards all the wall in the room, it should be pre-aligned to clean, clean from dust and primed. The board is placed on an absolutely dry surface. If the wall was painted, it is advisable to pre-apply fine-grained plaster. The material should be searched in this room for no less than a day in a unpacked form to adapt to the air temperature.
On the wall make marking and fasten each board using a special adhesive on an acrylic basis, which is applied to the wall and on the board. Instead of glue, you can use liquid nails or screws. It is necessary to do everything very carefully, to ensure that there are no slots between the boards, otherwise it will be fixed almost impossible.
Excess glue carefully scrape with a sharp knife so as not to damage the tile. Apply the glue is comfortable in a regular spatula, and press the tile to the wall can be a rubber rolling pin.
If the gaps between the boards still remained, then you can get rid of them. For this, a thin strip is cut out of the remaining material, lubricated with glue and glued to the slot, tightly pressing the wall. The remnants of the adhesive are cleaned with a knife. Outwardly, no one will notice such a trick: the traffic jam hides everything.
Article on the topic: Owl of paper do it yourself
If you need to cut off part of the board, then it is convenient to do with a conventional building knife. If the whole wall is covered, then from the floor it is necessary to make a gap to 2 cm, which will then block the plinth. If the tiles of a small size, then the laying is better to start from the center of the wall, gradually moving towards its edges. If there are minimal skills, you can cope with this work yourself.
From the cork board, you can cut out all sorts of figures and lay out patterns on the wall, which will not be repeated anywhere else. Especially beautiful such a wall will look, if you use different color and surface texture. This wall can be covered with acrylic or ceramic varnish so that it looks even more beautiful.
If you need to attach a cork floorboard to the wall, then there are some nuances. It is best to cut it with an electric jigsaw, and it is necessary to glue on the wall with liquid nails. Liquid nails are applied to the wall and the board, apply the board, then tear it from the wall and is finally glued after 10 minutes.
Cork board as design element
Often small sizes cork boards are used in the interior of the office, houses or apartments as a design. They can be framed in all sorts of frames or installed on a rack with rollers to conveniently move on the room. You can use the balance of the board after repair or buy a ready-made information board in the store.
You can make such a board yourself by choosing the appropriate size and shape. It cuts very easily with a building knife or large scissors.
Such a board can be painted in any color or draw it a whole picture. Such a board is convenient to use as an information, it can easily be mounted on pins or buttons of leaves with records.
You can pull the fabric to the corkboard, which will be harmonized with a common room interior. The fabric in size should be several centimeters more than the board itself to easily fix it on the back of the panel, it can be made with glue or small buttons.
Article on the topic: Application in the Preparatory Group: Fruit Vase and Autumn Carpet
You can place all sorts of trinkets or jewelry on this surface, which will look great. Often, such a panel is framed with a wooden frame and pin to it various married photos or pictures that can be changed if necessary.
In the office on a large cork panel, you can neatly glue the numbers and get a large calendar. At each date, you can mount the plugs to all sorts of reminders, it will be very convenient and accessible to everyone.
If after repairing a small piece of cork board remained, it can be inserted into the frame and put on the desktop. For such a board, it is convenient to place various notes with reminders of important matters or photos of your favorite people.
Interestingly, such panel boards in the children's room will look, if you cut all sorts of figures from them, having previously draws them on the plug surface. And under the New Year on the cork board, you can attach Christmas balls in the form of a Christmas tree. And if you still decorate the garland on top, then the defense will be easily delighted.
Such boards are not afraid of any blows, after the pin and the buttons, the surface is immediately closed. You can attach them to the wall using nails or screws, then on the back of the panel you need to attach the loops to which it will hang. You can glue the cork surface to the wall with glue or attach two-way scotch.
Cork board will be able to decorate the walls and mansion, and a modest urban apartment.
In addition, it looks very beautiful and is an ecological coating, because In production, it does not pass any additional chemical treatments.
This is, of course, an expensive material, but all its advantages are proportionate to the price, as a result, you can get a rather stylish and elegant design.