Transparent bulk bases of floors relatively recently appeared in the construction market and have already managed to gain popularity. They possess many advantages - the lack of any seams, special strength, heat capacity. With such high technical specifications, the bulk surfaces have a very long service life.
In addition, transparent coatings are the perfect version of the design of any interior. Such floors embody a wide variety of designer ideas and solutions. Often, coins are poured into a transparent base, a photo, an interesting image.
The main function of the transparent bulk coating is the reliable protection of the main floor. Also important is the decorative goal of "empower". Epoxy floor can be performed with their own hands in any room: living room, kitchen, bathroom, bedroom.
Transparent floor grounds are a great option for designing interiors of nightclubs, offices, hall hotels, pavilions and museums. Very often, epoxy floor can be found in the places of high patency of people.
FEATURES OF MONTAGE
Preparation of the foundation
The transparent surface provides reliable protection of the decor, which is stacked in the previous floor layer. Usually, the epoxy layer is performed on a well-prepared and purified concrete surface. It must be absolutely smooth and polished.
For the arrangement of sex with their own hands you will need
- Construction mixer,
- Spatulas, brushes,
- Sander,
- Industrial vacuum cleaner
- Needle roller.
The epoxy floor before laying requires the preparation of a rough base. At the beginning of work, the old base is dismantled, the surface is cleared of dirt and dust. Then the base is aligned with a thin screed. Be sure to wait for its complete drying for several weeks. Only after that you can start performing a bulk sex with your own hands.
After drying, the concrete is polished using a grinding machine. A thorough shtlocking of all cracks and irregularities is performed. Building dust is eliminated with the help of an industrial vacuum cleaner. A primer is applied to the surface of the screed. The primer layer will provide a better adhesion of epoxy composition with a rough surface.
Article on the topic: Requirements for boiler houses in a private house
Application of decorative layer
At the second stage of the work, a decorative layer is applied. In decoration of transparent sex, various images, photos, mosaic, stained glass windows, special stickers, painting with acrylic paints are used. There are a lot of various creative variants of transparent sex. Recently, three-dimensional images that visual 3D effect are widely used.
Execution of transparent emphasis
The transparent layer includes components such as resin and a special hardener. Its fulfillment can be entrusted to specialists who know the features of this technology. However, sometimes it is quite possible to do with your own skill and fill the floor with your own hands.
For this, two large containers are taken. The kneading of the desired composition is carried out by a construction mixer. In the process of preparing the solution, it is necessary to adhere to those specified in the instructions for a mixture of proportions. To get a matte surface, a quartz sand is added to the composition. All work on the installation of the floor should be performed very quickly, otherwise the squab will deteriorate.
The epoxy layer is applied to the surface with a toothed spatula. It should be distributed evenly. Then the whole surface is neatly rolled by a needle roller. Such actions prevent the bottom of the base and remove bubbles in liquor.
Although transparent sex is a time-consuming process, all work can be performed with your own hands. A similar approach will save money in the repair process.
When performing work, it is necessary to use the necessary means of individual protection. As for the composition, it is better to use the finished two-component polymer mixture. Today, bulk mixes in a wide range are presented in the construction market.
Tips for specialists
- In order for the epoxy layer to be operated for many years, it is necessary to carry out the appropriate waterproofing of a rough base. This will provide the best protection of the transparent floor and increase its service life.
- The primer layer is applied twice. Such a measure contributes to the greatest adhesion of the transparent floor with a rough base.
- Floor laying with your own hands is necessary using all the necessary tools. The base layer must quickly dry, after which they begin to decorate it with seashells, coins or other objects.
- If the drawing is applied, then it must dry well. Paint is better to leave until complete drying for 7 days. Only then you can lay a transparent layer.
- The bulk layer must be at least 3 mm.
Article on the topic: Drip irrigation systems: manufacturers, equipment, reviews
There is nothing complicated in the technology of bulk floors. Such a coating can be performed with your own hands, if you follow all existing rules. Not only to purchase bulk coatings. It is important to choose the right composition correctly, evaluate its mechanical and chemical properties. Only then the floor will serve for a long time and will be particularly resistant to various damage and negative impacts.
The bulk layer should not have after laying a yellow shade. If the use of polyurethane mixtures, an unpleasant yellowness may appear. Sometimes the use of compositions that include colorful pigments are allowed.
Decorative bulk surfaces are able to transform the entire interior of the room. They are aesthetic and attractive, original and hygienic. Such gender is the personification of luxury and wealth. A large selection of finished mixtures allows you to find the best option for designing the room.
In care, bulk coatings are extremely simple: they do not absorb dirt, resistant to moisture and are not collecting dust inside. To ensure cleanliness, it is enough to wipe the surface of the floor with a damp cloth using standard detergents.