When the construction of the house comes to an end, immediately a question: how beautiful and high-qualityly shelter the fronton of a wooden structure?
Finishing the front of the house
The frontton is called a plot of the house, which is located between the roofing rods. Most often it is a triangular structure, but sometimes you can see a trapezoidal, oval or other geometric shape.
Next, we will talk about why you need to sneak the fronton, on which materials you need to stop your attention and for what technology work.
Why do you need to wash the fronton?
Fronton at home
The height of the front is a space that can be obtained in the attic, as an additional area. Such a solution helps to create additional rooms.
Why do you need to sneak such a structure? The answer suggests itself, because if the repair is already over, and you look at the facade of the house, the unformed fronton spoils the general picture. Therefore, the fronton serves not only to extend the service life of the construction, but also is a decorative element, which can under power to make the end of the design of the construction and declare the preferences of the host of the house far beyond the yard.
What materials are better to use?
How to separate the fronton at home?
In order to sew a leg of a wooden house, use natural wood as different carpentry parts. If you treat wood with various antiseptics, it will serve you for many years. Less often for such work use thin-walled plaster, which includes protective specialized ingredients and silicone. Such additives help protect the design from the development of fungus and mold. At the end, such a design looks very attractive and beautiful, and can maintain its primary appearance and color for many years.
Today, siding is most popular, which can be manufactured, both from wood and with plastic. Such material can be sewn not only to the fronton, but also to sew hearing windows, eaves and other details. On the shelves, siding can be found in various colors, and various techniques can be applied to its laying, even the installation of profiles diagonally.
Article on the topic: Doors for the cabinet in the toilet - Wefer Roll Curtains
It is much less likely to use flat sheets of metal, because their high cost is not so justified. Such panels can be made of:
- aluminum;
- copper;
- titanium;
- galvanized.
As a rule, the steel panels are covered with polyurethane, polyester or polyamide. They allow you to protect the construction from mechanical damage, corrosion and negative impact of weather cataclysms.
But, this is not all ways. Extremely original and unusually looks like a painting of a wooden fronton tiled. Although such design requires large temporary and labor costs, the final result is worth it.
Subtleties of the front of the front of the house
Independent finish of the front of the house
To unambiguously decide on how to seize the fronton of the building, you need to take into account its design. Sometimes you can meet the fronton from the brick, but this design is not desirable, because it has an excessive effect on the walls, even despite the solid support for the roof.
Try to build wood to use wood. In this case, the frontoth can be sewed with a metal trim and install a mansard window or a small balcony.
Also during the creation of a project on the trim, the wind load and climatic features must be taken into account. Select the finishing material is also worth pushing out these factors.
At the end, your verdict should take into account the appearance of the construction, because if your home is decorated with siding, it is not the most relevant solution to the metal material.
From what material the framework was erected, preparation is depeted, which will be required before the trimming of the fronton. For the design of a wooden frame there are no strict requirements, which you will not say about the frame of the brick, concrete or asbatem. With such materials it will be necessary to spend more preparatory activities:
- Clear surface;
- align her;
- Seared visible defects.
Please note if your walls have large differences in terms of the level, you will need to evaluate the thickness of the plastering layer and use galvanized beacons that will need to be removed after work. Then the layer of plaster is applied and the time is given for its complete drying.
That's all, the surface is carefully prepared. Now it can be covered with a crate, in whose stacking you will not have any problems.
Article on the topic: Wallpaper in the hallway in the apartment photo 2019: for the corridor, design, modern ideas of interiors, fashionable, what to go, options, liquid in small, video
FRONTONE SIDING TECHNOLOGY
Finish frontones do it yourself
When you finally decide on the material, you can go to work.
The priority of work is described on the example of using siding, because it has the same technology as working with wood.
Singing specifications from different manufacturers are shown in the table below.
| Characteristic | Germany and Russia | Canada | USA |
| Thickness | 1.1 mm | 1,118mm | 1,016mm |
| Stretching strength | 546 kg / cm2 | 478 kg / cm2 | 419 kg / cm2 |
| Elasticity module | 27.61 kg / cm2 | 24,762 kg / cm2 | 27,611 kg / cm2 |
| Impact load | 1.843 m / g / cm2 | 2,238 m / g / cm2 | 1,585 m / g / cm2 |
| Floor temperature | Not happening | Not happening | Unknown |
| Protective layer | 0.15mm | 0.18mm | 0.15mm |
And so, to sheathe the frontoth siding can be followed by such steps:
- Surface insulation
All wood structures require antiseptic treatments. The ends of the house are the most problematic sites that you need to warm up as much as possible. To do this, you can use mineral wool or foam.
- Covering clamp
After insulation, it is necessary to install a crate, to fix which you need to use nails. Bruks, as a rule, are installed in 40 cm and control, so that they move vertically exactly, without distortion.
- Installation of the trim
Now the direct skin is produced. For this, the planks are fastened with self-drawing, starting with the fixation of the starting plank. It is not worth a nail and screw to screw too deep, leave a gap a couple of millimeters.
- Installation of the extreme panel
To install angular elements, it is necessary to use the H-profile. It is fixed with self-drawers, starting with the upper hole. Such work should be done in a pair, so that someone supported the panel while you set the basic fasteners.
- Outlooking window openings
If you have windows on your frontonone, they need to be made by special straps. Note that they are very expensive, so make measurements as accurately as possible. This attribute can be selected in the tone of the front, or vice versa is allocated using another shade or texture.
Article on the topic: Installing platforms of interroom doors with their own hands: Fastening (video)
Finishing the front of the house
Finally, I would like to add that before you do work, you need to get all the necessary materials, devices and equipment. Very often for such work, scaffolding is used. It would be nice to take care of their assembly before starting work, because this process also requires temporary costs.