Linoleum - the coating is quite popular, it is not necessary to have a special skill to lay it. But some skill and minimum knowledge is needed. A master who seriously comes to his work will certainly take care of purchasing a knife for linoleum.
Preparation for cutting
Before proceeding to the installation process, some necessary measures necessary for the correct flooring. If the repair is made in a cold period of time, the roll should be in heat at least 2 weeks. This is necessary, since the low storage temperature contributes to the loss of plasticity, and the material can crack on bends if it is deployed immediately.
After the last time, the reservoir should be spread on the plane (for 3 to 4 days) so that all irregularities are dealt. Otherwise, after fixing the coating, it turns.
Before starting work, you need to prepare tools. Need a large length line, a square. For marking, you will need a pencil. A spatula that has small teeth, and a special knife for cutting linoleum.
When everything is ready, you can mark the markup and cut the material. Knives are needed for work, as the edges, cut the tool not intended for such work, will be uneven and will not fall on the jack.
Marking
The ruler is measured by the desired length and width, the cut line is tagged with a pencil. Required stock when marking - 1 - 2 cm: Linoleum gives shrinkage.
The marked material is cut on the floor, while pressed on both sides by the cargo. If there is no confidence in the ability to make an even incision, you can attach a ruler and cutting, pressing the tool to it. For uneven lines, all sorts of bends lie in advance patterns, allowing to cut the material most accurately. Sliced layers should be seen for a certain period of time.
Article on the topic: Step-by-step technology building booths for dogs do it yourself
Models of knife
Tools are different types:- for cutting synthetic coating;
- general construction, having replaceable blades;
- Special, intended for the perfect slit edges at the junctions.
Popular species
Universal
Designed for cutting in a straight line. Working with it, you can fix the material. Able to cut a multi-layer linoleum. The edge is smooth.
Blades in such knives for linoleum replaceable, made of high-quality tempered steel. The screw tightly holds the work part, not allowing it to move. Special compartment on the handle is adapted for storage of blades.
Handle of many models is equipped with a rubberized overlay for ease of use. The versatility of the model involves the use of it and with other types of work. Cutting is possible only in a straight line.
Professionals prefer to work with a universal knife Delphin Fit 10360, its blades are reliable and withstand heavy loads.
Disk
Roller, or disk. Practical when cutting any linoleum. He has a pair of blades (or one) located in parallel. It is possible to cut off not only in a straight line, but also by curve.
The blade is sharpened in a circle, on the housing is fixed using a special fastener. The tool also allows you to cut rolls. Installation of blades that have a different format ("Hook", "Trapeze" and others are possible)
Retractable
Retractable knife for cutting linoleum. Externally, as a stationery, but the blade is a stronger, non-bend. The handle is also much stronger. Condition can be made at an angle that circumstances require.
The working part is movable, it is possible to adjust the length, it is also assumed to work with several layers of linoleum.
Monthly
The glue remaining on the surface will remove the knife, which is intended for these purposes. The blade in the shape of a crescent provides a qualitative performance of such an operation.
Such a model allows you to correct the edges. As a result of the use of the tool, the incision will be perfect, without irregularities. The fascinated blades can be removed and changed by inserting new ones.
Article on the topic: When you can turn on the warm floor after laying tiles
How to choose the model?
When choosing a knife, it is necessary to be guided by some of its features. A high-quality tool has a strong metallic (in some cases - a wooden) handle covered with plastic or rubber. Blade - only from high quality steel (stainless).
The handle must be perfectly settled in your hand and not slide. The elasticity of the working part is the main quality, the steel plane should not bend. Plate thickness - 0.6-1 mm, in width and length corresponds to the dimensions of the tool.
Before starting work, it is worth checking the degree of sharpness of blades and reliability of the case. It is subjected to considerable loads that must withstand. Training is also necessary: without practice it will be difficult to work, the hand must be used to the tool.
The proposed assortment of knives for cutting linoleum is great. The master will not be difficult to choose the one that he needs for high-quality work.